Keyword: vacuum
Paper Title Other Keywords Page
MOIXA04 Operational Experience for RIKEN Superconducting Linear Accelerator operation, linac, cyclotron, heavy-ion 30
 
  • K. Yamada, M. Fujimaki, H. Imao, O. Kamigaito, M. Komiyama, K. Kumagai, T. Nagatomo, T. Nishi, H. Okuno, K. Ozeki, N. Sakamoto, K. Suda, A. Uchiyama, T. Watanabe, Y. Watanabe
    RIKEN Nishina Center, Wako, Japan
  
  The RIKEN superconducting heavy-ion linac, so-called SRILAC, has been successfully operating for almost four years, and continuously deliver a heavy ion beam for a super-heavy-element synthesis experiment. The effects of a broken coupler in the early days and four years of operation have resulted in increased X-ray emission levels in several superconducting cavities, which have been successfully corrected by pulse conditioning. This talk will share the experiences and lessons learned from four-year operation with low beta SC-cavities.  
slides icon Slides MOIXA04 [4.517 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOIXA04  
About • Received ※ 06 July 2023 — Revised ※ 10 July 2023 — Accepted ※ 19 August 2023 — Issue date ※ 22 August 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMB006 SIMS Characterization of Nitrogen Doping of LCLS-II-HE Production Cavities cavity, SRF, niobium, controls 67
 
  • C.E. Reece, M.J. Kelley, E.M. Lechner
    JLab, Newport News, Virginia, USA
  • J.W. Angle
    Virginia Polytechnic Institute and State University, Blacksburg, USA
  
  Funding: Work supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-AC05-06OR23177 and Office of High Energy Physics grant DE-SC-0014475.
The thermal diffusion of nitrogen into the surface of niobium has been shown to yield superior low-loss SRF performance. An effective solution was identified and promptly employed in the production of cryomodules for LCLS-II. With added experience and R&D, a modified process was chosen for use in the upgrade for LCLS-II-HE. Largely motivated by this circumstance, supporting research has significantly refined the technique for making calibrated secondary ion mass spectrometry (SIMS) measurements of the N concentration depth profiles produced by production processes. Standardized reference samples were included with four HE production cavities in their N-doping furnace runs. We report the calibrated dynamic SIMS depth profiles of N, C, and O for these samples, together with the cryogenic acceptance test performance of the associated cavities. Interpretation and comparison with similar samples acquired in other furnaces highlights the importance of intentional process quality control of furnace conditions. 		 
poster icon Poster MOPMB006 [1.380 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB006  
About • Received ※ 16 June 2023 — Revised ※ 26 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 18 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMB011 Deposition and Characterisation of V₃Si films for SRF Applications cavity, SRF, site, target 84
 
  • C. Benjamin, J.A. Conlon, O.B. Malyshev, R. Valizadeh
    STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
  • G. Burt, O.B. Malyshev, D.J. Seal, R. Valizadeh
    Cockcroft Institute, Warrington, Cheshire, United Kingdom
  • G. Burt, D.J. Seal
    Lancaster University, Lancaster, United Kingdom
  • N.L. Leicester, H.S. Marks
    Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
  • L.G.P. Smith
    STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
  
  Funding: This project has received funding from the European Union’s Horizon 2020 Research and Innovation programme under Grant Agreement No 101004730.
A15 superconducting materials, like V₃Si and Nb₃Sn, are potential alternatives to Nb for next generation thin film SRF cavities when operated at 4 K. Their relatively high Tc and superconducting properties could allow for higher accelerating gradients and elevated operating temperatures. We present work on the deposition of V₃Si thin films on planar Cu substrates and an open structure 6 GHz cavity, using physical vapour deposition (PVD) and a V₃Si single target. The surface structure, composition and DC superconducting properties of two planar samples were characterised via secondary electron microscopy (SEM), energy dispersive x-ray spectroscopy (EDX) and in a magnetic field penetration facility. Furthermore, the first deposition using PVD of a V₃Si film on a 6 GHz split cavity and the RF performance is presented. 		 
poster icon Poster MOPMB011 [7.496 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB011  
About • Received ※ 16 June 2023 — Revised ※ 22 June 2023 — Accepted ※ 29 June 2023 — Issue date ※ 19 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMB015 Development of a Plasma-Enhanced Chemical Vapor Deposition System for High-Performance SRF Cavities cavity, SRF, plasma, controls 100
 
  • G. Gaitan, A.T. Holic, W.I. Howes, G. Kulina, P. Quigley, J. Sears, Z. Sun
    Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
  • M. Liepe
    Cornell University, Ithaca, New York, USA
  • B.W. Wendland
    University of Minnesota, Minnesota, USA
  
  Funding: This work was supported by the U.S. National Science Foundation under Award PHY-1549132, the Center for Bright Beams
Next-generation, thin-film surfaces employing Nb₃Sn, NbN, NbTiN, or other compound superconductors are essential for reaching enhanced RF performance levels in SRF cavities. However, optimized, advanced deposition processes are required to enable high-quality films of such materials on large and complex-shaped cavities. For this purpose, Cornell University is developing a plasma-enhanced chemical vapor deposition (CVD) system that facilitates coating on complicated geometries with a high deposition rate. This system is based on a high-temperature tube furnace with a high-vacuum, gas, and precursor delivery system, and uses plasma to significantly reduce the required processing temperature and promote precursor decomposition. Here we present an update on the development of this system, including final system design, safety considerations, assembly, and commissioning. 		 
poster icon Poster MOPMB015 [1.951 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB015  
About • Received ※ 16 June 2023 — Revised ※ 29 June 2023 — Accepted ※ 01 July 2023 — Issue date ※ 16 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMB022 Recent mid-T Single-Cell Treatments R&D at DESY cavity, niobium, SRF, controls 129
 
  • C. Bate, D. Reschke, J. Schaffran, L. Steder, L. Trelle, H. Weise
    DESY, Hamburg, Germany
  
  The challenge of improving the performance of SRF cavities is being faced worldwide. One approach is to modify the superconducting surface properties through certain baking procedures. Recently a niobium retort furnace placed directly under an ISO4 clean room has been refurbished at DESY. Thanks to an inter-vacuum chamber and cryopumps, with high purity values in the mass spectrum it is working in the UHV range of 2·10-8 mbar. The medium temperature (mid-T) heat treatments around 300°C are promising and successfully deliver reproducible very high Q₀ values of 2-5·1010 at medium field strengths of 16 MV/m. Since the first DESY and ZRI mid-T campaign yielded promising results, further results of 1.3 GHz single-cell cavities are presented here after several modified treatments of the mid-T recipe. In addition, samples were added to each treatment, the RRR value change was examined, and surface analyses were subsequently performed. The main focus of the sample study is the precise role of the changes in the concentration of impurities on the surface. In particular, the change in oxygen content due to diffusion processes is suspected to be the cause of enhancing the performance.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB022  
About • Received ※ 18 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 01 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMB044 Topographic Evolution of Nitrogen Doped Nb Subjected to Electropolishing SRF, cavity, niobium, ECR 207
 
  • E.M. Lechner, C.G. Baxley, M.J. Kelley, C.E. Reece
    JLab, Newport News, Virginia, USA
  • J.W. Angle, M.J. Kelley
    Virginia Polytechnic Institute and State University, Blacksburg, USA
  
  Funding: DE-AC05-06OR23177 DE-SC-0014475
Surface quality is paramount in facilitating high perfor-mance SRF cavity operation. Here, we investigate the topographic evolution of samples subjected to N-doping and 600 °C vacuum anneal. We show that in N-doped Nb, niobium nitrides may grow continuously along grain boundaries. Upon electropolishing high slope angle grooves are revealed which sets up a condition that may facilitate a supression of the superheating field. 		 
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB044  
About • Received ※ 19 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 17 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMB049 Plasma Processing: Ignition Testing and Simulation Models for a 172 MHz HWR Cavity plasma, cavity, simulation, SRF 219
 
  • M.E. McIntyre, B.R. Blomberg, M.P. Kelly, J.T. McLain, K.M. Villafania, G.P. Zinkann
    ANL, Lemont, Illinois, USA
  • Z. Wei
    GIT, Atlanta, Georgia, USA
  
  Maintenance and cleaning of superconducting RF cavities is labor intensive task that involves disassembling the cryostat holding the resonators and removing them to be cleaned. At the Argonne Tandem Linac Accelerating System (ATLAS) at Argonne National Laboratory, a project is underway to research cleaning the cavities in-situ by plasma processing. Previous plasma processing research by SNS, MSU, FNAL, and IJCLab has been successful in improving field emissions post processing. It is advantageous to pursue research in this method, allowing for possible use on modern ATLAS cryomodules, A-tank and G-tank quarter-wave resonators. The results presented show initial plasma ignition testing and plasma simulations for the coupled E and B fields, both done on a 172 MHz HWR cavity previously designed as early R&D for FRIB. Future plans are also included, laying out next steps to test plasma processing on the same HWR cavity and eventually a QWR.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB049  
About • Received ※ 05 July 2023 — Revised ※ 25 July 2023 — Accepted ※ 24 September 2023 — Issue date ※ 24 September 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMB074 Cryomodule Storage for LCLS-II HE cryomodule, controls, cavity, cathode 282
 
  • D.A. White, M. Checchin, D. Gonnella, J. Hogan, J.T. Maniscalco, R.D. Porter
    SLAC, Menlo Park, California, USA
  
  Funding: U.S. Department of Energy
The Linac Coherent Light Source-II High Energy (LCLS-II HE) project will upgrade the superconducting LCLS-II with 23 additional cryomodules, increasing the beam energy from 4 GeV to 8 GeV. Due to the user schedule of the existing linac, Cryomodules arriving at SLAC cannot immediately be installed in the linac. They are scheduled to be stored for up to three years before the 12-month installation window. During this storage period, the risk of damage to Cryomodules prior to installation will be mitigated with procedures and best practices incorporating experience from LCLS-II. 		 
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB074  
About • Received ※ 25 June 2023 — Revised ※ 28 June 2023 — Accepted ※ 03 July 2023 — Issue date ※ 10 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMB081 Microphonics in the LCLS-II Superconducting Linac cryomodule, cavity, linac, operation 302
 
  • R.D. Porter, S. Aderhold, L.E. Alsberg, D. Gonnella, J. Nelson, N.R. Neveu, L.M. Zacarias
    SLAC, Menlo Park, California, USA
  • A.T. Cravatta, J.P. Holzbauer, S. Posen
    Fermilab, Batavia, Illinois, USA
  • M.A. Drury, M.D. McCaughan, C.M. Wilson
    JLab, Newport News, Virginia, USA
  • G. Gaitan, N.A. Stilin
    Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
  
  Funding: Work supported by the LCLS-II project
The LCLS-II project has installed a new superconducting linac at SLAC that consists of 35 1.3 GHz cryomodules and 2 3.9 GHz cryomodules. The linac will provide a 4 GeV electron beam for generating soft and hard X-ray pulses. Cavity detuning induced by microphonics was a significant design challenge for the LCLS-II cryomodules. Cryomodules were produced that were within the detuning specification (10 Hz for 1.3 GHz cryomodules) on test stands. Here we present first measurements of the microphonics in the installed LCLS-II superconducting linac. Overall, the microphonics in the linac are manageable with 94% of cavities coming within the detune specification. Only two cavities are gradient limited due to microphonics. We identify a leaking cool down valve as the source of microphonics limiting those two cavities. 		 
poster icon Poster MOPMB081 [1.284 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB081  
About • Received ※ 18 June 2023 — Revised ※ 29 June 2023 — Accepted ※ 30 June 2023 — Issue date ※ 01 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMB084 FRIB Driver Linac Integration to Support Operations and Protect SRF Cryomodules operation, linac, cryomodule, SRF 316
 
  • H. Ao, K. Elliott, D.D. Jager, S.H. Kim, L. Popielarski
    FRIB, East Lansing, Michigan, USA
  
  Funding: Work supported by the U.S. Department of Energy Office of Science under Cooperative Agreement DE-SC0000661.
The driver linac for the Facility for Rare Isotope Beams (FRIB) at Michigan State University includes 324 superconducting radio-frequency (SRF) cavities, and the SRF particle-free beamline spans approximately 300 meters. Protecting the beamlines against contamination is critical to FRIB operations, and thus, various administrative and engineered controls have been put in place to protect the SRF cryomodules. These controls include local vacuum interlocks for cryomodule isolation, accelerator-wide interlocks, and software controls to safeguard the cryomodules and beamlines. Meanwhile, efforts are being made to provide training and develop programs with the goal of preventing critical failures during maintenance. This paper discusses the measures and approaches used for both system integration to support operations and SRF beamline protection. 		 
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB084  
About • Received ※ 14 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 18 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMB089 Installation of LCLS-II Cryomodules cryomodule, hardware, cavity, MMI 324
 
  • D.A. White, S. Aderhold, R. Coy, D. Gonnella
    SLAC, Menlo Park, California, USA
  
  Funding: U.S. Department of Energy
The Linac Coherent Light Source II (LCLS-II) super-conducting accelerator is fully installed and operational. Cryomodules were designed and manufactured by Fermi National Accelerator Laboratory (FNAL) and Thomas Jefferson National Laboratory (JLab) during 2017-2020. From November 2018 through March 2021, SLAC Na-tional Accelerator Laboratory installed 37 Cryomodules. Full system cooldown was completed in March 2022. Installation processes were optimized at SLAC for best quality, especially during particle-free and UHV assem-bly. These processes and successful Cavity and Cry-omodule manufacturing resulted in installed gradient exceeding design requirements by more than 20%. No statistical variation in field emission onsets or magni-tudes were observed between manufacturing and site testing. This paper summarizes SLAC experience during installation, and relevant testing results. 		 
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB089  
About • Received ※ 20 June 2023 — Revised ※ 28 June 2023 — Accepted ※ 29 June 2023 — Issue date ※ 15 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPMB092 Performance of Contaminated Superconducting Linac after Vacuum Excursion cavity, cryomodule, ISAC, linac 332
 
  • Z.Y. Yao, R.E. Laxdal
    TRIUMF, Vancouver, Canada
  
  ISAC-II superconducting heavy ion linac is the high energy section of TRIUMF ISAC facility to accelerate rare isotopes with A/q <= 6 from 1.5 MeV/u to above the Cou-lomb barrier for experiments. There was a vacuum excur-sion caused by an operational error and the failure of the fast protection system in summer 2022. The beamline downstream to the SC linac was vented with atmosphere air from the experimental hall resulting in pollution of the linac. This paper reports the RF performance of the con-taminated linac. The typical cavity performance changes, the average magnitude of degradation, the impact range in the SC linac, the observations in the recovery processes and the analyses on the most distinct cavity are discussed. The cavity refurbishment in the recent winter shutdown with the observations and outcomes is also reported. The ISAC-II event provided a unique data set for the SRF community.  
poster icon Poster MOPMB092 [6.186 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-MOPMB092  
About • Received ※ 23 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 02 July 2023  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPTB001 Demonstration of Niobium Tin in 218 MHz Low-Beta Quarter Wave Accelerator Cavity cavity, niobium, multipactoring, SRF 388
 
  • T.B. Petersen, G. Chen, B.M. Guilfoyle, M. Kedzie, M.P. Kelly, T. Reid
    ANL, Lemont, Illinois, USA
  • G.V. Eremeev, S. Posen, B. Tennis
    Fermilab, Batavia, Illinois, USA
  
  A 218 MHz quarter wave niobium cavity has been fabricated for the purpose of demonstrating Nb₃Sn technology on a low-beta accelerator cavity. Niobium-tin has been established as a promising next generation SRF material, but development has focused primarily in high-beta elliptical cell cavities. This material has a significantly higher TC than niobium, allowing for design of higher frequency quarter wave cavities (that are subsequently smaller) as well as for significantly lowered cooling requirements (possibly leading to cryocooler based de-signs). The fabrication, initial cold testing, and Nb₃Sn coating are discussed as well as test plans and details of future applications.  
poster icon Poster TUPTB001 [0.653 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-TUPTB001  
About • Received ※ 16 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 08 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPTB004 Progress on Zirconium-Doped Niobium Surfaces niobium, ECR, electron, superconductivity 398
 
  • N. Sitaraman, T. Arias, Z. Baraissov, D.A. Muller
    Cornell University, Ithaca, New York, USA
  • G. Gaitan, M. Liepe, T.E. Oseroff, Z. Sun
    Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
  
  Funding: This work was supported by the NSF under Award PHY-1549132, the Center for Bright Beams, and in part by CNF (NSF Grant NNCI-2025233), and in part by CCMR (DMR-1719875).
The first experimental studies of zirconium-doped surfaces verified that zirconium can enhance the critical temperature of the surface, resulting in a lower BCS resistance than standard-recipe niobium. However, they also produced a disordered oxide layer, resulting in a higher residual resistance than standard-recipe niobium. Here, we show that zirconium-doped surfaces can grow well-behaved thin oxide layers, with a very thin ternary suboxide capped by a passivating ZrO2 surface. The elimination of niobium pentoxide may allow zirconium-doped surfaces to achieve low residual resistance. 		 
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-TUPTB004  
About • Received ※ 30 June 2023 — Revised ※ 26 July 2023 — Accepted ※ 19 August 2023 — Issue date ※ 22 August 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPTB018 MgB₂ Coating Parameter Optimization Using a 1.3-GHz 1-Cell Cavity cavity, SRF, controls, experiment 425
 
  • T. Tajima, T.P. Grumstrup, J.D. Thompson
    LANL, Los Alamos, New Mexico, USA
  • H. Ito, E. Kako, T. Okada, H. Sakai, K. Umemori
    KEK, Ibaraki, Japan
  
  Funding: DOE Office of Science, Office of High Energy Physics
We have started parameter optimization for the coating of MgB₂ using a 1-cell 1.3-GHz elliptical cavity with holes for small samples. Our coating method is based on a 2-step technique, i.e., coat a B layer by flowing diborane gas in the first step and react it with Mg vapor in the 2nd step. Three 6 mm x 6 mm B-coated flat samples are attached at inlet, outlet beam pipes, and at a cell equator and reacted with Mg vapor with different parameters and conditions. We started to see the superconducting transitions on samples but Tc is still lower than our goal of >35 K. We will present our current status of B-Mg reaction tests and construction of B coating system. 		 
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-TUPTB018  
About • Received ※ 06 July 2023 — Revised ※ 26 July 2023 — Accepted ※ 02 September 2023 — Issue date ※ 03 September 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPTB019 First Results from Nb₃Sn Coatings of 2.6 GHz Nb SRF Cavities Using DC Cylindrical Magnetron Sputtering System cavity, SRF, site, MMI 429
 
  • M.S. Shakel, H. Elsayed-Ali
    ODU, Norfolk, Virginia, USA
  • G.V. Eremeev
    Fermilab, Batavia, Illinois, USA
  • U. Pudasaini, A-M. Valente-Feliciano
    JLab, Newport News, Virginia, USA
  
  Funding: Supported by DOE, Office of Accelerator R&D and Production, Contact No. DE-SC0022284, with partial support by DOE, Office of Nuclear Physics DE-AC05-06OR23177, Early Career Award to G. Eremeev.
A DC cylindrical magnetron sputtering system has been commissioned and operated to deposit Nb₃Sn onto 2.6 GHz Nb SRF cavities. After optimizing the deposition conditions in a mock-up cavity, Nb-Sn films are deposited first on flat samples by multilayer sequential sputtering of Nb and Sn, and later annealed at 950 °C for 3 hours. X-ray diffraction of the films showed multiple peaks for the Nb₃Sn phase and Nb (substrate). No peaks from any Nb-Sn compound other than Nb₃Sn were detected. Later three 2.6 GHz Nb SRF cavities are coated with ~1 µm thick Nb₃Sn. The first Nb₃Sn coated cavity reached close to Eacc = 8 MV/m, demonstrating a quality factor Q₀ of 3.2 × 108 at Tbath = 4.4 K and Eacc = 5 MV/m, about a factor of three higher than that of Nb at this temperature. Q₀ was close to 1.1 × 109, dominated by the residual resistance, at 2 K and Eacc = 5 MV/m. The Nb₃Sn coated cavities demonstrated Tc in the range of 17.9 ¿ 18 K. Here we present the commissioning experience, system optimization, and the first results from the Nb₃Sn fabrication on flat samples and SRF cavities. 		 
poster icon Poster TUPTB019 [1.216 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-TUPTB019  
About • Received ※ 16 June 2023 — Revised ※ 24 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 10 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPTB025 Preparation of the Assembly of the 650 MHz Low Beta Cryomodules for the PIP-II Linear Accelerator cryomodule, cavity, alignment, feedback 442
 
  • J. Drant, N. Bazin, S. Berry, A. Raut
    CEA-DRF-IRFU, France
  • R. Cubizolles, A. Moreau
    CEA-IRFU, Gif-sur-Yvette, France
  
  The Proton Improvement Plan II (PIP-II) that will be installed at Fermilab is the first U.S. accelerator project that will have significant contributions from international partners. CEA¿s scope covers the supply of the 650 MHz low-beta cryomodule sections with the cavities provided by LASA-INFN (Italy) and VECC-DAE (India) as well as the power couplers supplied by Fermilab. This scope includes the assembly of the 650 MHz low-beta cryomodules. Assembly studies have been conducted based on CEA experience acquired on previous projects as well as on the feedback of Fermilab on the assembly of the HB650 prototype cryomodule. This paper presents the organization of assembly phases from the cavity string in the clean room and the assembly of the cryostat to the preparation of the cryomodule before its shipment to Fermilab.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-TUPTB025  
About • Received ※ 16 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 29 June 2023 — Issue date ※ 07 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPTB029 Measurement of Particulates under Slow Pumping after High Pressure Rinsing of Superconducting Cavity by Using Modified Slow Pumping System cavity, controls, cryomodule, SRF 458
 
  • H. Sakai, E. Kako, R. Katayama, K. Umemori
    KEK, Ibaraki, Japan
  
  Funding: This research was partially supported by the research fund from Ministry of Education, Culture, Sports, Science and Technology (MEXT).
Slow pumping system was used for particle free vacuum pumping in Superconducting rf accelerator. In KEK, recently slow pumping system was developed for the cryomodule assembly work for STF 9-cell cavities and worked well to reduce the particulates movements under pumping. However, this slow pumping system want to be used for preparation of vertical test. Before assembly work in clean room for vertical test, we normally apply high pressure rinsing. There were many waters in the cavity. Therefore, we kept one night to dry inside cavity in clean room. Unfortunately, there were some waters in the cavity even though we kept drying in clean room for one night. This water might make some icing under pumping and stop pumping in mass flow meter, which used for slow pumping to control the mass flow. Therefore, we modify the slow pumping system to be robust under slow pumping even when water exists in the cavity. In this paper, we present the modified slow pumping system in KEK and the results of the vacuum trend through slow pumping of 9-cell superconducting cavity. Under slow pumping, we measure the particulates after high pressure rinsing by using vacuum particle monitor. 		 
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-TUPTB029  
About • Received ※ 16 June 2023 — Revised ※ 26 June 2023 — Accepted ※ 21 August 2023 — Issue date ※ 22 August 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPTB037 Refurbishment and Reactivation of a Niobium Retort Furnace at DESY cavity, controls, niobium, target 485
 
  • L. Trelle, C. Bate, H. Remde, D. Reschke, J. Schaffran, L. Steder, H. Weise
    DESY, Hamburg, Germany
  
  Funding: This work was supported by the Helmholtz Association within the topic Accelerator Research and Development (ARD) of the Matter and Technologies (MT) Program.
For research in the field of heat treatments of supercon-ducting cavities, a niobium ultra-high vacuum furnace built in 1992 - originally used for the titanization of 1.3 GHz nine-cell cavities - and later shut down was recently refurbished and reactivated. A significant upgrade is the ability to run the furnace in partial pressure mode with nitrogen. The furnace is connected directly to the ISO4 area of the clean room for cavity handling. At room temperature vacuum values of around 3×10-8 mbar are achieved. The revision included the replacement of the complete control system and a partial renewal of the pump technology. The internal mounting structures are optimized for single-cell operation including tandem operation (two single-cell cavities at once) and corresponding accessories such as witness-samples and caps for the cavities. The installation of additional thermocouples for a detailed monitoring of the temperature curves is also possible at the mounting structure. Due to the furnace design, its location and the strict routines in handling, very high purity levels are achieved in comparison to similar setups and hence provide a mighty tool for SRF cavity R&D at DESY. 		 
poster icon Poster TUPTB037 [0.404 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-TUPTB037  
About • Received ※ 18 June 2023 — Revised ※ 24 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 01 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPTB040 Mechanical Design and Analysis of SRF Gun Cavity Using ASME BPVC Section Viii, Division-2, Design by Analysis Requirement cavity, SRF, gun, niobium 501
 
  • M.S. Patil, C. Compton, S.H. Kim, S.J. Miller, T. Xu
    FRIB, East Lansing, Michigan, USA
  
  Funding: Work supported by the Department of Energy Contract DE-AC02- 76SF00515
A prototype SRF gun is currently being designed at FRIB, MSU for the Low Emittance Injector of the Linac Coherent Light Source high energy upgrade at SLAC. This employs a 185.7 MHz superconducting quarter-wave resonator (QWR). The mechanical design of this cavity has been optimized for performance and to comply with ASME Section VIII, Div 2, Design by analysis requirements. This paper presents the various design by analysis procedures and how they have been adopted for the SRF gun cavity design. 		 
poster icon Poster TUPTB040 [1.235 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-TUPTB040  
About • Received ※ 15 June 2023 — Revised ※ 25 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 18 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEIBA01 Surface Engineering by ALD for Superconducting RF Cavities cavity, niobium, SRF, site 615
 
  • Y. Kalboussi, C.Z. Antoine, M. Baudrier, Q. Bertrand, C. Boulch, B. Delatte, G. Jullien, L. Maurice, Th. Proslier, P. Sahuquet, T.V. Vacher
    CEA-IRFU, Gif-sur-Yvette, France
  • M. Asaduzzaman, T. Junginger
    UVIC, Victoria, Canada
  • M. Asaduzzaman
    TRIUMF, Vancouver, Canada
  • D. Dragoe
    ICMMO, Orsay, France
  • F. Éozénou
    CEA-DRF-IRFU, France
  • N. Lochet
    CEA, DES, Université Paris-Saclay, Gif-sur-Yvette, France
  • D. Longuevergne, T. Pépin-Donat
    Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
  • F. Miserque
    CEA, LECA, Université Paris-Saclay, Gif-sur-Yvette, France
  
  Atomic Layer Deposition is a synthesis method that enable a unique control of thin films chemical composition and thickness over complex shape objects such as SRF cavities. This level of control opens the way to new surface treatments and to study their effect on RF cavity performances. We will present coupon and, in some cases, preliminary cavity results, from various surface engineering routes based on the deposition of thin oxides and nitrides films combined with post annealing treatments and study their interactions with the niobium. Three main research directions will be presented: 1/ replacing the niobium oxides by other surface layers (Al₂O₃, Y2O3, MgO) and probe their effect on the low and high field performances, 2/ doping with N and combine approaches 1/ and 2/ and finally 3/ optimize the superconducting properties of NbTiN multilayers on Nb and Sapphire.  
slides icon Slides WEIBA01 [13.613 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEIBA01  
About • Received ※ 06 July 2023 — Revised ※ 12 August 2023 — Accepted ※ 19 August 2023 — Issue date ※ 19 August 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB043 Nb3Sn Vapor Diffusion Coating System at SARI: Design, Construction, and Commissioning cavity, niobium, MMI, superconducting-cavity 655
 
  • Q.X. Chen, Y. Zong
    SINAP, Shanghai, People’s Republic of China
  • J.F. Chen, S. Xing
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
  • J. Rong
    SSRF, Shanghai, People’s Republic of China
  
  This paper describes the design of a coating system for the preparation of a superconducting radio-frequency cavity with Nb3Sn thin films. The device consists of a coating chamber made of pure niobium, a vacuum furnace for heating the coating chamber, a superconducting cavity bracket and two crucible heaters. The chamber is vacuum isolated from the furnace body to protect the superconducting cavity from contamination during the coating process. The device has been built and commissioned, which could be used for Nb₃Sn coating of a 1.3 GHz single-cell superconducting cavity in future.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB043  
About • Received ※ 19 June 2023 — Revised ※ 22 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 08 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB045 The Oxidizing Responses of Baked Niobium Exposed to Various Gases via In-situ NAXPS niobium, cavity, experiment, SRF 662
 
  • Z.T. Yang, J.K. Hao, K.X. Liu, S.W. Quan
    PKU, Beijing, People’s Republic of China
  
  We carried out in-situ NAXPS (Near-atmospheric X-ray Photoelectron Spectroscopy) on SRF-cavity class niobium to observe its oxidizing responses when exposed to various gases. The niobium samples were baked at 800°C until the peaks of niobium oxides disappeared in the spectrum. Then the revealed pure niobium samples were exposed to the air-proportion mixture of nitrogen and oxygen, pure oxygen, and pure water vapor respectively. And for the pure oxygen and water vapor group, we also carried out TOF-SIMS (Time-of-Flight Secondary Ion Mass Spectroscopy) measurements before and after the baking and oxidation experiments. We found that pure oxygen and water vapor could oxidize niobium at similar rate which was faster than the N2/O2 mixture. After re-oxidized by pure oxygen and water vapor, the niobium sample presented a significant increase of interstitial carbon and a moderate increase of interstitial oxygen in the magnetic penetration depth, while it showed a mild decrease of interstitial hydrogen.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB045  
About • Received ※ 15 June 2023 — Revised ※ 23 June 2023 — Accepted ※ 25 June 2023 — Issue date ※ 31 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB058 Contribution of IN2P3 to PIP-II Project: Plans and Progress cavity, SRF, linac, status 714
 
  • D. Longuevergne, N. Bippus, P. Duchesne, N. Gandolfo, D. Le Dréan, G. Mavilla, T. Pépin-Donat, S. Roset, L.M. Vogt, S. Wallon
    Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
  • P. Berrutti, J. Helsper, S. Kazakov, M. Parise, D. Passarelli, N. Solyak, A.I. Sukhanov
    Fermilab, Batavia, Illinois, USA
  
  Funding: Work supported by IN2P3. Work supported, in part, by the U.S. Department of Energy, Office of Science, Office of High Energy Physics, under U.S. DOE Contract No. DE-AC02-07CH11359.
IJCLab is one of the labs of IN2P3 (National institute of nuclear and particle physics), one of the ten research institutes composing the French National Center for Scientific Research (CNRS). Since 2018, IJCLab has been involved in the PIP-II project, assisting with the design, development, and qualification of accelerator components for the SSR2 (Single Spoke Resonator type 2) section of the superconducting linac. The first pre-production components (cavity, coupler, and tuner) have been fabricated, and some of the first qualification tests have been performed at IJCLab. This paper will summarize the complete scope of IJCLab¿s contributions to PIP-II and give updates on the performances of the first pre-production components. 		 
poster icon Poster WEPWB058 [1.727 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB058  
About • Received ※ 24 June 2023 — Revised ※ 28 June 2023 — Accepted ※ 05 July 2023 — Issue date ※ 10 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB063 Final Design of the LB650 Cryomodule for the PIP-II Linear Accelerator cryomodule, cavity, interface, simulation 721
 
  • R. Cubizolles, S. Ladegaillerie, A. Moreau
    CEA-IRFU, Gif-sur-Yvette, France
  • N. Bazin, S. Berry, J. Drant, P. Garin, A. Raut, C. Simon
    CEA-DRF-IRFU, France
  • S.K. Chandrasekaran, O. Napoly, V. Roger
    Fermilab, Batavia, Illinois, USA
  
  The Proton Improvement Plan II (PIP-II) that will be installed at Fermilab is the first U.S. accelerator project that will have significant contributions from international partners. CEA joined the international collaboration in 2018, and its scope covers the supply of the 650 MHz low-beta cryomodule section, with the design of the cryostat (i.e the cryomodule without the cavities, the power couplers and the frequency tuning systems) and the manufacturing of its components, the assembly and tests of the pre-production cryomodule and 9 production modules. An important milestone was reached in April 2023 with the Final Design Review. This paper presents the detailed design of the 650 MHz low-beta cryomodules.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB063  
About • Received ※ 21 June 2023 — Revised ※ 28 June 2023 — Accepted ※ 04 July 2023 — Issue date ※ 20 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB066 Final Design of the Production SSR1 Cryomodule for PIP-II Project at Fermilab cryomodule, cavity, alignment, solenoid 736
 
  • J. Bernardini, M. Chen, J. Helsper, M. Kramp, F.L. Lewis, T.H. Nicol, M. Parise, D. Passarelli, V. Roger, G.V. Romanov, B. Squires
    Fermilab, Batavia, Illinois, USA
  • P. Neri
    University of Pisa, Pisa, Italy
  
  Funding: Work supported by Fermi Research Alliance, LLC under Contract No. DEAC02- 07CH11359 with the United States Department of Energy, Office of Science, Office of High Energy Physics.
This contribution reports the design of the production Single Spoke Resonator Type 1 Cryomodule (SSR1 CM) for the PIP-II project at Fermilab. The innovative design is based on a structure, the strongback, which supports the coldmass from the bottom, stays at room temperature during operations, and can slide longitudinally with respect to the vacuum vessel. The Fermilab style cryomodule developed for the prototype Single Spoke Resonator Type 1 (pSSR1), the prototype High Beta 650 MHz (pHB650), and preproduction Single Spoke Resonator Type 2 (ppSSR2) cryomodules is the baseline of the present design. The focus of this contribution is on the results of calculations and finite element analyses performed to optimize the critical components of the cryomodule: vacuum vessel, strongback, thermal shield, and magnetic shield. 		 
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB066  
About • Received ※ 17 June 2023 — Revised ※ 24 June 2023 — Accepted ※ 28 June 2023 — Issue date ※ 15 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB067 HB650 Cryomodule Design: From Prototype to Production cryomodule, cavity, radiation, SRF 741
 
  • V. Roger, S.K. Chandrasekaran, C.J. Grimm, J.P. Holzbauer, O. Napoly, J.P. Ozelis, D. Passarelli
    Fermilab, Batavia, Illinois, USA
  
  Funding: This manuscript has been authored by Fermi Research Alliance, LLC, under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics.
In early 2023 the assembly of the prototype HB650 cryomodule (pHB650 CM) was completed and cold tests started to evaluate its performance. The lessons learned from the design, assembly and preliminary cold tests of this cryomodule, and from the design of the SSR2 pre-production cryomodule played a fundamental role during the design optimization process of the production HB650 cryomodule (HB650 CM). Several workshops have been organized to share experiences and solve problems. This paper presents the main design changes from pHB650 to the HB650 production cryomodules and their impact on the heat loads. 		 
poster icon Poster WEPWB067 [2.178 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB067  
About • Received ※ 18 June 2023 — Revised ※ 25 June 2023 — Accepted ※ 28 June 2023 — Issue date ※ 01 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB076 Low Particulates Nitrogen Purge and Backfill during Prototype HB650 Cryomodule String Assembly cavity, controls, SRF, cryomodule 765
 
  • T.J. Ring, M.B. Quinlan, G. Wu
    Fermilab, Batavia, Illinois, USA
  
  Funding: This manuscript has been authored by Fermi Research Alliance, LLC, under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics.
A low particulate vacuum and purging system was developed to support PIP-II cryomodule string assembly. The overpressure can be controlled at a precision of 1 mbar above the atmospheric pressure regardless of the cavity or string assembly air volume. The system minimized the risk of uncontrolled nitrogen flow during the string assembly. Design features will be presented. 		 
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB076  
About • Received ※ 19 June 2023 — Revised ※ 24 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 09 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB085 Degradation and Recovery of Cavity Performance in SRILAC Cryomodules at RIBF cavity, operation, SRF, acceleration 784
 
  • N. Sakamoto, O. Kamigaito, K. Ozeki, K. Suda, K. Yamada
    RIKEN Nishina Center, Wako, Japan
  
  The RIKEN superconducting (SC) heavy-ion linear accelerator (SRILAC) has been providing beam supply for super-heavy elements synthesis experiments since its commissioning in January 2020. However, the long-term operation of SC radio-frequency (RF) cavities leads an increase in the X-ray levels caused by field emissions resulting from changes in the inner surface conditions. More than half of the ten SC 1/4 wavelength resonators (SC-QWRs) of SRILAC, operating at a frequency of 73 MHz, have experienced an increase in X-ray levels, thus, requiring adjustments to the acceleration voltage for continuous operation. While several conditioning methods have been employed for SC cavities, a fully established technique is yet to be determined. To address this situation, a relatively simple conditioning method was implemented at RIKEN. The proposed method uses high-voltage pulsed power and imposes a low load on the cavities.  
poster icon Poster WEPWB085 [12.789 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB085  
About • Received ※ 13 June 2023 — Revised ※ 26 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 01 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB092 Test-Stand for Conditioning of Fundamental Power Couplers at DESY FEL, GUI, cavity, MMI 797
 
  • K. Kasprzak, Th. Buettner, A. Gössel, D. Klinke, D. Kostin, C. Müller, E. Vogel, M. Wiencek
    DESY, Hamburg, Germany
  
  During the construction of the European-XFEL, activities related to Fundamental Power Couplers (FPCs) were outsourced to external partners and the former FPC test-stand area at DESY was given up due to infrastructure rearrangements. For the study of various XFEL upgrade scenarios a new test-stand for conditioning of FPCs at DESY is required. It will be used for evaluation of new coupler preparation methods with particular emphasis on Continuous Wave (CW) and long RF pulse operation. The new test-stand has been recently commissioned. Four FPCs have been prepared and tested. RF pulses were applied to the couplers, starting with the shortest possible pulse and increasing it’s power until maximum power was reached. The process was repeated with several pulse lengths until the maximum RF pulse length was reached. A review of the commissioning and first operation experience of the RF system are presented here.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB092  
About • Received ※ 15 June 2023 — Revised ※ 24 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 16 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB093 Transportation Fatigue Testing of the pHB650 Power Coupler Antenna for the PIP-II Project at Fermilab SRF, linac, cryomodule, resonance 801
 
  • J. Helsper, S.K. Chandrasekaran, J.P. Holzbauer, N. Solyak
    Fermilab, Batavia, Illinois, USA
  
  Funding: This manuscript has been authored by Fermi Research Alliance, LLC, under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics.
The PIP-II Project will see international shipment of cryomodules from Europe to the United States, and as such, the shocks which can occur during shipment pose a risk to the internal components. Of particular concern is the coupler ceramic window and surrounding brazes, which can see relatively high stress during an excitation event. Since the antenna design is new, and because of the setback failure would create, a cyclic stress test was devised for the antenna. This paper presents the experimental methods, setup, and results of the test. 		 
poster icon Poster WEPWB093 [2.913 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB093  
About • Received ※ 19 June 2023 — Revised ※ 27 June 2023 — Accepted ※ 29 June 2023 — Issue date ※ 03 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB094 Design, Manufacturing, Assembly, and Lessons Learned of the Pre-Production 325 MHz Couplers for the PIP-II Project at Fermilab cavity, SRF, interface, cryomodule 806
 
  • J. Helsper, S. Kazakov, D. Passarelli, N. Solyak
    Fermilab, Batavia, Illinois, USA
  • D. Longuevergne, S. Wallon
    Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
  
  Funding: This manuscript has been authored by Fermi Research Alliance, LLC, under Contract No. DE-AC02-07CH11359 with the U.S. Department of Energy, Office of Science, Office of High Energy Physics.
Five 325 MHz high-power couplers will be integrated into the pre-production Single Spoke Resonator Type-II (ppSSR2) cryomodule for the PIP-II project at Fermilab. Couplers were procured by both Fermilab and IJCLAB for this effort. The design of the coupler is described, including design optimizations from the previous generation. This paper then describes the coupler life cycle, including design, manufacturing, and assembly, along with the lessons learned at each stage. 		 
poster icon Poster WEPWB094 [3.561 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB094  
About • Received ※ 19 June 2023 — Revised ※ 27 June 2023 — Accepted ※ 29 June 2023 — Issue date ※ 29 June 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB096 Testing of PIP-II Pre-production 650 MHz Couplers in Warm Test Stand and Cryomodule cavity, cryomodule, resonance, coupling 812
 
  • N. Solyak, S.K. Chandrasekaran, B.M. Hanna, J. Helsper, J.P. Holzbauer, S. Kazakov, A.I. Sukhanov
    Fermilab, Batavia, Illinois, USA
  
  650 MHz fundamental power couplers were developed for PIP-II project to deliver RF power for low-beta and high-beta elliptical cavities. Few prototypes were built and tested and after some modification we built 8 pre-production couplers (with three spares for vacuum side) for ppHB650 cryomodule. All couplers were successfully tested in pulse mode (up to 100kW) and in CW mode (up to 50kW) in test stand at full reflection at 8 phases. In baseline configuration with DC bias we do not see any multipactoring activity after short processing. We also tested power processing without bias for uncoated and TiN coated ceramic window. Results of these studies presented in this paper. One of the coupler was assembled on LB650 cavity and tested at cryogenic environment in STC cryostat at ~30kW power with full reflection at different reflection phase. We also demonstrated good result from power processing without bias for warm and cold cavity. Six couplers were assembled on HB650 cavities in pre-production cryomodule. Test results from cryomodule qualification is discussing in this paper.  
poster icon Poster WEPWB096 [2.748 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB096  
About • Received ※ 19 June 2023 — Revised ※ 25 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 17 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB097 Testing and Processing of Pre-production 325 MHz Single Spoke Resonator Power Couplers for PIP-II Project cavity, coupling, SRF, pick-up 816
 
  • N. Solyak, B.M. Hanna, J. Helsper, S. Kazakov, D. Passarelli
    Fermilab, Batavia, Illinois, USA
  • S. Wallon
    Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
  
  Fundamental 325 MHz power couplers are designed, built and tested for SSR cavities in PIP-II project [1]. Couplers should work in CW mode at power level 7.5kW w/o beam and ~15 kW with the 2 mA beam. At pre-production stage we built and tested 6 couplers, produced by CPI (FNAL) and PMB (IJCLab) and 4 more couplers will be tested soon. Two of tested cou-plers had TiN coated ceramic window. In warm test stand two couplers were mounted on the coupling chamber and tested in SW regime at full reflection with phase controlled by position of short and reflection insert. Couplers were tested at pulse mode (up to 25kW) and cw mode (12kW) with HV bias or without bias. Test results demonstrated that 3.5 kV DC bias completely suppresses multipactor in coupler. Vacuum activity in coupler was controlled by e-pickups and build-in vacuum gauges, located near the vacuum side of window. Power processing without DC bias was done for several couplers with and without TiN coating on ceramic window. Test results are presented and discussing in paper.  
poster icon Poster WEPWB097 [2.439 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB097  
About • Received ※ 19 June 2023 — Revised ※ 25 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 29 June 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB098 Development and Evaluation of STF-Type Power Coupler for Cost Reduction at the High Energy Accelerator Research Organization SRF, GUI, cryomodule, cavity 820
 
  • Y. Yamamoto, T. Matsumoto, S. Michizono
    KEK, Ibaraki, Japan
  
  At KEK, cost reduction study for STF-type input power coupler used in the STF-2 accelerator has been attempted since FY2015. In FY2019, one coupler was fabricated by some cost-effective and non-conventional methods including different alumina-ceramic material, copper plating and TiN coating. In high power RF test at room temperature, this coupler achieved 1 MW at 900 µsec/5Hz, and 935 kW @1.65 msec/5Hz. After that, this coupler experienced 10 thermal cycle tests from room temperature to liquid nitrogen temperature without vacuum leakage. In this report, the detailed results will be presented.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB098  
About • Received ※ 17 June 2023 — Revised ※ 24 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 02 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB101 Present Status of RIKEN Power Couplers for SRILAC Windows, SRF, linac, operation 823
 
  • K. Ozeki, O. Kamigaito, N. Sakamoto, K. Suda, K. Yamada
    RIKEN Nishina Center, Wako, Japan
  
  The heavy ion linac of the RIKEN, utilizing superconducting technology, began operations in September 2019. Over the following 13 months, two of the ten superconducting accelerating cavities experienced vacuum leaks from the vacuum windows of the fundamental power couplers (FPCs). Currently, additional vacuum windows are installed on all ten FPCs and the beam supply continues without encountering any major issues with the FPCs. Additionally, the fabrication of ten replacement FPCs has been completed, addressing the underlying issues that led to the deterioration of the vacuum window strength. Currently, we are conducting radio frequency (RF) process of the new FPCs. In addition, we are designing a bias applying component to suppress multipacting in the FPCs. This paper reports the status of these issues related to the FPCs at the RIKEN.  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB101  
About • Received ※ 19 June 2023 — Revised ※ 27 June 2023 — Accepted ※ 28 June 2023 — Issue date ※ 14 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB102 Recent Progress of Fundamental Power Couplers for the SHINE Project FEL, cryomodule, cavity, electron 827
 
  • Z.Y. Ma, J.F. Chen, H.T. Hou, B. Liu, Y. Liu, S. Sun, D. Wang, L. Yin, M. Zhang, S.J. Zhao, Y.B. Zhao, Z.T. Zhao, X. Zheng
    SARI-CAS, Pudong, Shanghai, People’s Republic of China
  
  Funding: Project supported by Shanghai Municipal Science and Technology Major Project (Grant No.2017SHZDZX02).
The superconducting radio-frequency electron linear accelerator of the Shanghai HIgh repetition rate XFEL aNd Extreme light facility (SHINE) contains 610 1.3 GHz fundamental power couplers which are assembled in 77 superconducting cryomodules used for beam acceleration, and 16 3.9 GHz fundamental power couplers, which are assembled in two third harmonic superconducting cryomodules used for linearizing the longitudinal phase space. The first batch of 26 1.3 GHz coupler prototypes and two 3.9 GHz coupler prototypes have been fabricated from three domestic manufacturers for basic research. Several key manufacturing processes have been developed and qualified, including high residual resistivity ratio (RRR) copper plating, vacuum brazing of ceramic windows, electron beam welding and titanium nitride coating. All the 1.3 GHz coupler prototypes have been power conditioned with 14 kW travelling wave (TW) and 7 kW standing wave (SW) RF in continuous-wave (CW) mode. Even higher power levels have been demonstrated with 20 kW TW and 10 kW SW RF, which indicates their robustness. Both 3.9 GHz coupler prototypes have been power conditioned with 2.2 kW TW and 2 kW SW RF in CW mode. 		 
poster icon Poster WEPWB102 [2.361 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB102  
About • Received ※ 16 June 2023 — Revised ※ 25 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 05 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB104 RF Conditioning of MYRRHA Couplers at IJCLab electron, cavity, FEL, multipactoring 835
 
  • N. ElKamchi, S. Berthelot, P. Duchesne, C. Joly, W. Kaabi, C. Magueur
    Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
  • Y. Gómez Martínez
    LPSC, Grenoble Cedex, France
  • C. Lhomme
    IJCLab, ORSAY, France
  
  Multi-purpose hYbrid Research Reactor for High-tech Applications (MYRRHA) is an experimental accelerator-driven system in development at SCK•CEN. It will allow fuel developments, material developments for GEN IV systems, material developments for fusion reactors and radioisotope production for medical and industrial applications1. The IJCLab has in charge the industrial monitoring, the quality control and the RF conditioning of the power couplers up to 80KW at 352Mhz. This paper presents the conditioning bench adapted from the successful experience of IJCLab in the conditioning of the XFEL couplers2. The results of the conditioning of prototype couplers are described and discussed.
1. Abderrahim, P. MYRRHA a multi-purpose hybrid research reactor for high-tech applications. United States: N. p., 2012. Web
2. H. Guler, Proceedings of IPAC2016, Busan, Korea
 		 
poster icon Poster WEPWB104 [0.875 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB104  
About • Received ※ 26 June 2023 — Revised ※ 27 June 2023 — Accepted ※ 29 June 2023 — Issue date ※ 08 August 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB111 A New Ultra-High Vacuum Furnace for SRF R&D cavity, niobium, operation, SRF 855
 
  • M. Wenskat, C. Bate
    DESY, Hamburg, Germany
  • C. Bate, C. Martens
    University of Hamburg, Hamburg, Germany
  • R. Ghanbari, W. Hillert
    University of Hamburg, Institut für Experimentalphysik, Hamburg, Germany
  
  Funding: This work was supported by the BMBF under the research grants 05K19GUB and 05H2021.
A new vacuum furnace has been designed and purchased by the University of Hamburg and is operating in an ISO5 cleanroom. This furnace can anneal single-cell TESLA cavities at temperatures up to 1000°C and with a pressure of less than 10-7mbar or in a nitrogen atmosphere of up to 10-2mbar. We will lay out the underlying design ideas, based on the gained experience from our previous annealing research, and present the commissioning of the furnace itself. Additionally, we will show for the first time the results of sample and cavity tests after annealing in the furnace. This will be accompanied by an overview of the intended R&D process and scientific questions to be addressed. 		 
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB111  
About • Received ※ 21 June 2023 — Revised ※ 15 July 2023 — Accepted ※ 20 August 2023 — Issue date ※ 21 August 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPWB137 Prototype SSR2 Tuner Procurement and Testing at IJCLab for PIP-II Project cavity, insertion, SRF, cryomodule 917
 
  • N. Gandolfo, P. Duchesne, D. Le Dréan, D. Longuevergne, G. Mavilla, T. Pépin-Donat
    Université Paris-Saclay, CNRS/IN2P3, IJCLab, Orsay, France
  • M. Parise, D. Passarelli, Y.M. Pischalnikov
    Fermilab, Batavia, Illinois, USA
  
  Funding: Work supported by IN2P3. Work supported, in part, by the U.S. Department of Energy, Office of Science, Office of High Energy Physics, under U.S. DOE Contract No. DE-AC02-07CH11359.
IJCLab is involved in the PIP-II project on the design and development of accelerator components for the SSR2 (Single Spoke Resonator type 2) section of the superconducting linac. Five prototype tuners have been built and are being tested at IJCLab. After a short description of the tuner, this paper reports on the procurement strategy and the performance observed at both room and low temperatures in vertical cryostat test with SSR2 prototype cavities. This paper will also share results on accelerated lifetime tests performed in a dedicated nitrogen-cooled cryostat. 		 
poster icon Poster WEPWB137 [1.395 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-WEPWB137  
About • Received ※ 19 June 2023 — Revised ※ 25 June 2023 — Accepted ※ 29 June 2023 — Issue date ※ 16 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THIAA02 RF Performance Results of RF Double Quarter Wave Resonators for LHC High Luminosity Project cavity, HOM, luminosity, radiation 925
 
  • K. Turaj, J. Bastard, R. Calaga, S.J. Calvo, O. Capatina, A. Castilla, M. Chiodini, C. Duval, A.V. Edwards, L.M.A. Ferreira, M. Gourragne, P. Kohler, E. Montesinos, C. Pasquino, G. Pechaud, N. Stapley, N. Valverde Alonso, J.D. Walker
    CERN, Meyrin, Switzerland
  • A. Castilla
    JLAB, Newport News, USA
  • A.V. Edwards
    Lancaster University, Lancaster, United Kingdom
  
  The LHC High Luminosity (HL-LHC) project includes, among other key items, the installation of superconducting crab cavities in the LHC machine. The Double Quarter Wave (DQW) crab cavity will be utilised to compensate for the effects of the vertical crossing angle. Two bare DQW series cavities were manufactured in Germany by RI Research Instruments and validated successfully at CERN through a cold test at 2K. Two DQW series cavities were produced in-house at CERN, integrated into a titanium helium tank, and equipped with RF ancillaries. This paper addresses the cavities preparation processes and summarizes the results of cryogenic tests of DQW cavities at CERN  
slides icon Slides THIAA02 [10.840 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-THIAA02  
About • Received ※ 16 June 2023 — Revised ※ 24 June 2023 — Accepted ※ 27 June 2023 — Issue date ※ 01 July 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THIAA03 Completion of Testing Series Double-spoke Cavity Cryomodules for ESS cryomodule, cavity, operation, SRF 932
 
  • R. Santiago Kern, K. Fransson, K.J. Gajewski, L. Hermansson, H. Li, T. Lofnes, A. Miyazaki, M. Olvegård, I.P. Profatilova, R.J.M.Y. Ruber, C.D.I. Svanberg, M. Zhovner
    Uppsala University, Uppsala, Sweden
  
  The FREIA Laboratory at Uppsala University, Sweden, has completed the evaluation of 13 double-spoke cavity cryomodules for ESS. This is the first time double-spoke cavities will be deployed in a real machine. This paper summarizes testing procedures and statistics of the results and lessons learned.  
slides icon Slides THIAA03 [4.687 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-SRF2023-THIAA03  
About • Received ※ 16 June 2023 — Revised ※ 24 June 2023 — Accepted ※ 26 June 2023 — Issue date ※ 29 June 2023
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)