Keyword: booster
Paper Title Other Keywords Page
MOZMH01 CEPC-SppC Accelerator Status collider, positron, luminosity, proton 1
 
  • J. Gao
    IHEP, Beijing, People's Republic of China
 
  In this talk we will give a bird view of the status Circular Electron Positron Collider (CEPC). The scientific goal and the collider design goal of CECP are described. The luminosity potentail of Super Proton-Proton Collider (SPPC) in the same tunnel of CEPC are also provided. The optimization of parameter designs for CEPC with different energies, machine lengthes, single ring and crab-waist collision partial double ring options, etc. have been given systimatically. The machine lattice design philosophy and conrete lattice design are given. The corresponding SC RF system designs corresponding to different machine options are presented. Key issues for technology R&D, possible time schedule and international collaboration are addressed.  
slides icon Slides MOZMH01 [10.473 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WECAMH01 Some Problems of the Beam Extraction from Circular Accelerators extraction, controls, injection, resonance 61
 
  • S.N. Andrianov
    St. Petersburg State University, St. Petersburg, Russia
  • N.S. Edamenko
    Saint Petersburg State University, Saint Petersburg, Russia
 
  In this article some problems of optimizing the output beam of particles from the circular accelerator are discussed. In particular, we consider some problems of matching the booster, Nuclotron and collider in the NICA project. The main attention is paid to the matching of the extraction beam systems. The proposed approach allows providing qualitative and quantitative analysis of the impact of various factors of the corresponding control systems.  
slides icon Slides WECAMH01 [1.912 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THCDMH03 The Progress on Manufacturing and Testing of the SC Magnets for the NICA Booster Synchrotron dipole, superconducting-magnet, collider, synchrotron 144
 
  • H.G. Khodzhibagiyan, N.N. Agapov, P.G. Akishin, V.V. Borisov, A.V. Bychkov, A.M. Donyagin, A.R. Galimov, O. Golubitsky, V. Karpinsky, B.Yu. Kondratiev, S.A. Korovkin, S.A. Kostromin, A.V. Kudashkin, G.L. Kuznetsov, D.N. Nikiforov, A.V. Shemchuk, S.A. Smirnov, A.Y. Starikov, G.V. Trubnikov
    JINR, Dubna, Moscow Region, Russia
 
  NICA is a new accelerator collider complex under construction at the Joint Institute for Nuclear Research in Dubna. The facility is aimed at providing collider experiments with heavy ions up to Gold in the center of mass energy from 4 to 11 GeV/u and an average luminosity up to 1*1027 cm-2 s−1 for Au79+. The collisions of polarized deuterons are also foreseen. The facility includes two injector chains, a new superconducting booster synchrotron, the existing 6 AGeV superconducting synchrotron Nuclotron, and a new superconducting collider consisting of two rings, each 503 m in circumference. The booster synchrotron is based on an iron-dominated "window frame"- type magnet with a hollow superconductor winding analogous to the Nuclotron magnet. The design of superconducting magnets for the NICA booster synchrotron is described. The progress of work on the manufacturing and testing of the magnets is discussed. The calculated and measured values of the characteristics of the magnets are presented. The status of the facility for serial test of superconducting magnets for the NICA and FAIR projects is described.  
slides icon Slides THCDMH03 [8.068 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FRCAMH01 Status of the Nuclotron operation, controls, experiment, TANGO 150
 
  • A.O. Sidorin, N.N. Agapov, A.V. Alfeev, V. Andreev, V. Batin, O.I. Brovko, V.V. Bugaev, A.V. Butenko, D.E. Donets, A.V. Eliseev, V.V. Fimushkin, E.V. Gorbachev, A. Govorov, A.Yu. Grebentsov, E.V. Ivanov, V. Karpinsky, H.G. Khodzhibagiyan, A. Kirichenko, V. Kobets, A.D. Kovalenko, O.S. Kozlov, K.A. Levterov, V.A. Mikhailov, V.A. Monchinsky, A. Nesterov, Yu.M. Nozhenko, A.L. Osipenkov, S. Romanov, P.A. Rukojatkin, A.A. Shurygin, I. Slepnev, V. Slepnev, A.V. Smirnov, E. Syresin, G.V. Trubnikov, A. Tuzikov, B. Vasilishin, V. Volkov
    JINR, Dubna, Moscow Region, Russia
  • A. Belov
    RAS/INR, Moscow, Russia
  • I.V. Gorelyshev, A.V. Philippov
    JINR/VBLHEP, Dubna, Moscow region, Russia
  • A.O. Sidorin
    St. Petersburg University, St. Petersburg, Russia
 
  Since last RuPAC two runs of the Nuclotron operation were performed: in January - March of 2015 and June 2016. Presently we are providing the run, which has been started at the end of October and will be continued up to the end of December. The facility development is aimed to the performance increase for current physical program realization and preparation to the NICA Booster construction and Baryonic Matter at Nuclotron experiment.  
slides icon Slides FRCAMH01 [20.777 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
FRCAMH05 Booster Synchrotron at NICA Accelerator Complex kicker, ion, injection, dipole 160
 
  • A. Tuzikov, O.I. Brovko, A.V. Butenko, A.V. Eliseev, A.A. Fateev, V. Karpinsky, H.G. Khodzhibagiyan, S.A. Kostromin, I.N. Meshkov, V.A. Mikhaylov, A.O. Sidorin, A.I. Sidorov, A.V. Smirnov, E. Syresin, G.V. Trubnikov, V. Volkov
    JINR, Dubna, Moscow Region, Russia
  • O. Anchugov, V.A. Kiselev, D.A. Shvedov, A.N. Zhuravlev
    BINP SB RAS, Novosibirsk, Russia
 
  NICA is the new complex being constructed on the JINR aimed to provide collider experiments with ions up to aurum at energy of 4.5x4.5 GeV/u. The NICA layout includes 600 MeV/u Booster synchrotron as a part of the injection chain of the NICA Collider. The main goals of the Booster are the following: accumulation of 4E109 Au31+ ions; acceleration of the heavy ions up to energy required for effective stripping; forming of the required beam emittance with electron cooling system. The layout makes it possible to place the Booster having 210.96 m circumference and four fold symmetry lattice inside the yoke of the former Synchrophasotron. The features of the Booster, its main systems, their parameters and current status are presented in this paper.  
slides icon Slides FRCAMH05 [16.830 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPSA004 Proposal of the Accelerating Structure for the First Cavity of the Main Part of INR Linac cavity, linac, coupling, hadron 216
 
  • I.V. Rybakov, A. Feschenko, Y.Z. Kalinin, L.V. Kravchuk, V.N. Leontiev, A.N. Naboka, V.V. Paramonov, V.L. Serov
    RAS/INR, Moscow, Russia
 
  For the beam intensity and overall stability improvement of INR linac replacement of the first four section cavity of the main part is required. The present cavity is realized as the Disks and Washers (DAW) structure. The new cavity should not lose to the present one in electro dynamical parameters with minimal modifications in the rest linac systems. As the possible structures for the first cavity replacement both proven in exploitation structures and promising developments were considered. The analysis of electro dynamical parameters, coupled RF heating, mechanical processes and manufacturing analysis were performed for the considered structures. For further development the Cut Disk Structure (CDS) option is proposed as the structure with satisfying RF parameters and having the smallest transverse dimensions in comparison with analogues. For the production simplification with minimal losses in electro dynamical parameters an unification of the main geometrical parameters for the four sections cells was performed. The possibility of multipaction in the cavity is considered and an option for its damping is proposed. The manufacturing tolerances for the structure are estimated.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPSB036 Gold Ions Beam Losses at the Nuclotron Booster ion, vacuum, beam-losses, electron 440
 
  • A.V. Philippov, A. Tuzikov
    JINR/VBLHEP, Dubna, Moscow region, Russia
 
  The calculation results of the gold ions beam losses along the Nuclotron Booster perimeter are given. The presented results take the ion stimulated desorption from the cold surface of the vacuum chamber and collimation of charge-exchanged gold ions into account.  
poster icon Poster WEPSB036 [1.919 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPSB037 Beam Transfer From Heavy-Ion Linear Accelerator HILAC Into Booster of NICA Accelerator Complex injection, kicker, ion, emittance 443
 
  • A. Tuzikov, A.V. Butenko, A.A. Fateev, S.Yu. Kolesnikov, I.N. Meshkov, V.A. Mikhaylov, V.S. Shvetsov, A.O. Sidorin, A.I. Sidorov, G.V. Trubnikov, V. Volkov
    JINR, Dubna, Moscow Region, Russia
 
  Designs of systems of ion beam transfer from the linear accelerator HILAC into the Booster of the NICA accelerator complex (JINR, Dubna) including the transport beam line HILAC-Booster and the beam injection system of the Booster are considered in the report. The proposed systems provide multivariant injection for accumulation of beams in the Booster with required intensity. Special attention is paid to various aspects of beam dynamics during its transfer. Main methods of beam injection into the Booster are described. These are single-turn, multiturn and multiple injection ones. Results of beam dynamics simulations are presented. Status of technical design and manufacturing of the systems' equipment is also highlighted.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPSB040 Commissioning of the 60 keV Electron Cooler for the NICA Booster electron, vacuum, cathode, ion 452
 
  • A.V. Bubley, M.I. Bryzgunov, A.P. Denisov, A.D. Goncharov, V.M. Panasyuk, V.V. Parkhomchuk, V.B. Reva
    BINP SB RAS, Novosibirsk, Russia
 
  The 60 keV electron cooler for the NICA booster was designed and constructed at BINP SB RAS. The article describes results of various measurements obtained during its commissioning. Also some details of design and construction of the cooler are discussed.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPSC005 Magnetic Measurement System For the NICA Collider Dual Dipoles collider, dipole, data-acquisition, power-supply 547
 
  • M.M. Shandov, V.V. Borisov, A.V. Bychkov, A.M. Donyagin, O. Golubitsky, H.G. Khodzhibagiyan, S.A. Kostromin, M.M. Omelyanenko
    JINR, Dubna, Russia
  • A.V. Shemchuk
    JINR/VBLHEP, Dubna, Moscow region, Russia
 
  NICA collider magnetic system consists of 80 dual dipole superconducting magnets. Measurement of magnetic field parameters is assumed for each collider magnets. This paper describes magnetic measurements methods and developing of magnetic measurements system.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPSC010 Magnetic Measurement System For The NICA Quadrupole Magnets quadrupole, collider, superconducting-magnet, cryogenics 559
 
  • A.V. Shemchuk
    JINR/VBLHEP, Dubna, Moscow region, Russia
  • V.V. Borisov, A.V. Bychkov, A.M. Donyagin, O. Golubitsky, H.G. Khodzhibagiyan, S.A. Kostromin, M.M. Omelyanenko, M.M. Shandov
    JINR, Dubna, Moscow Region, Russia
 
  NICA booster magnetic system consists of 40 dipole and 48 quadrupole superconducting magnets. Measurement of magnetic field parameters is assumed for each booster magnets. The booster quadrupole is 0.45 m-long, 47.5 mm pole radius magnet with design similar to the Nuclotron type quadrupole magnet. Focusing and defocusing quadrupole magnets are jointed in doublets. They will produce fields up to 21.5 T/m. Two magnetic measurements system with tangential and radial coils arrays were developed and produced. This paper describes the magnetic measurements methods as well as the first results of the magnetic measurements.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPSC013 The Nonsymmetrical Variant of the Nonferromagnetic Extraction Kicker Magnet of the NICA Booster kicker, extraction, acceleration, injection 566
 
  • V. Aleksandrov, A.A. Fateev, A. Tuzikov
    JINR, Dubna, Moscow Region, Russia
 
  Development and creation of the NICA acceleration complex are continued at JINR (Dubna). One of the main facilities of the complex is the Booster in which preliminary acceleration and cooling of an ion beam is performed. Further acceleration is fulfilled in the circular accelerator NUCLOTRON. The beam transfer from the Booster into the NUCLOTRON is provided by means of the fast extraction system and one of its central elements is the kicker magnet. For the beam deflecting into the extraction septum-magnet it is supposed to use the nonferrous kicker magnet consisting of two couples of conductors. Recent changes made in configuration of the Booster extraction section demand decrease of the kicker magnet length that leads to change of the beam extraction scheme. This report is devoted to the choice of the alternative design of the magnet (the nonsymmetrical variant).  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPSC018 Achievement of Necessary Vacuum Conditions in the NICA Accelerator Complex vacuum, collider, ion, cathode 575
 
  • A.V. Smirnov, A.M. Bazanov, A.V. Butenko, A.R. Galimov, H.G. Khodzhibagiyan, A. Nesterov, A.N. Svidetelev, A. Tikhomirov
    JINR, Dubna, Moscow Region, Russia
 
  NICA is a new accelerator collider complex under construction at the Joint Institute for Nuclear Research in Dubna. The facility is aimed at providing collider experiments with heavy ions up to Gold in a center of mass energy range from 4 to 11 GeV/u and an average luminosity up to 1027 cm-2 s-1. The collisions of polarized deuterons are also foreseen. The facility includes two injector chains, a new superconducting booster synchrotron, the existing superconducting synchrotron Nuclotron, and a new superconducting collider consisting of two rings, each of about 500 m in circumference. Vacuum volumes of the accelerator booster and Nuclotron and the superconducting collider are divided into volumes of superconducting elements thermal enclosure and beam chambers. The beam chambers consist regular cold periods, which are at a temperature of 4.2K to 80K, and warm irregular gaps at room temperature. Operating pressure in the thermal enclosure vacuum volumes have to maintained in the range of 10-7 to 10-4 mbar, in the beam chamber cold and warm areas - not more than 2·10-11 mbar. The requirements for materials, surface preparation conditions and the level of leakage in the vacuum volume are set out. The description of way to achievement and maintenance of the working vacuum in the NICA project are presented.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPSC024 The Pulsed High Voltage Power Supply for the NICA Booster Injection System power-supply, controls, injection, TANGO 592
 
  • A.A. Fateev, E.V. Gorbachev, H.P. Nazlev
    JINR, Dubna, Moscow Region, Russia
  • V. A. Bulanov
    JINR/VBLHEP, Dubna, Moscow region, Russia
 
  Three pairs of electrostatic deflecting plates will be used in the injection system of booster ring. The electric circuit and design of the power supply system for one plate are presented in the report. The experimental results of testing are also presented.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPSC030 High-Precision Ramped High-Voltage Source With Up to 50 kV Output Voltage high-voltage, feedback, interface, electron 609
 
  • D.V. Senkov, A.M. Batrakov, I.A. Gusev, A.Yu. Protopopov, A.A. Zharikov
    BINP SB RAS, Novosibirsk, Russia
 
  This report describes the precision high-voltage ramped high-voltage power system. The output voltage up to 50 kV with 10 ppm precision. The power system consists of the 3 kW high-voltage source based on multiplier, presision high-voltage divider with digital interface and high-voltage discharge switch to provide low ramp-down time for output voltage. The power system is planed to use in the NIKA booster electron cooler project. The description and test results are presented.  
poster icon Poster THPSC030 [1.985 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPSC043 Series Magnetic Measurements Of NICA Booster Dipoles dipole, coupling, electron, quadrupole 629
 
  • V.V. Borisov, A.V. Bychkov, A.M. Donyagin, O. Golubitsky, H.G. Khodzhibagiyan, S.A. Kostromin, M.M. Omelyanenko, M.M. Shandov
    JINR, Dubna, Moscow Region, Russia
  • A.V. Shemchuk
    JINR/VBLHEP, Dubna, Moscow region, Russia
 
  NICA booster magnetic system consists of 40 dipole and 48 quadrupole superconducting (SC) magnets. Measurement of magnetic field parameters is assumed for each booster magnets. At the moment six series dipole magnets are assembled and have passed all tests. Booster dipole magnets are 2.14 m-long, 128 /65 mm (h/v) aperture magnets with design similar to Nuclotron dipole magnet but with curved (14.1 m radius) yoke. They will produce fields up to 1.8 T. The magnetic field parameters will be measured at "warm" (300 K) and "cold" (4.5 K) conditions. The obtained results of magnetic measurements of first five magnets are summarized here.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPSC056 Proposal to Symmetric Quench Detection at Superconducting Elements by Bridge Scheme Usage detector, superconductivity, collider, acceleration 662
 
  • E.V. Ivanov
    JINR, Dubna, Moscow Region, Russia
  • A.O. Sidorin, A.L. Svetov
    JINR/VBLHEP, Dubna, Moscow region, Russia
 
  In the frame of the NICA project two new superconducting accelerators will be constructed - the Booster and the NICA collider. Specialized facility for manufacturing and testing of the SC magnets for the NICA and FAIR projects is under development at JINR. Proposal to quench detection system for these and similar facilities is described in this paper.  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)