Keyword: heavy-ion
Paper Title Other Keywords Page
MOY01 The NICA Complex Injection Facility booster, injection, acceleration, proton 7
 
  • A.V. Butenko, S.A. Kostromin, I.N. Meshkov, A.O. Sidorin, E. Syresin
    JINR/VBLHEP, Dubna, Moscow region, Russia
  • H.G. Khodzhibagiyan, G.V. Trubnikov
    JINR, Dubna, Russia
 
  The Nuclotron-based Ion Collider fAcility (NICA) is un-der construction in JINR. The NICA goals are providing of colliding beams for studies of hot and dense strongly interacting baryonic matter and spin physics. The NICA complex injection facility consists of four accelerators: Alvarez-type linac LU-20 of light ions up to 5 MeV/u; heavy ion linac HILAC with RFQ and IH DTL sections at energy 3.2 MeV/u; superconducting Booster synchrotron at energy up 578 MeV/u; superconducting synchrotron Nuclotron at gold ion energy 3.85 GeV/u. In the nearest future the old LU-20 will be substituted by a new light ion linac for acceleration of 2<A/z<3 ions up to 7 MeV/u with additional two acceleration sections for protons, first IH section for 13 MeV and the second one - superconducting for 20 MeV. The status of NICA injec-tion facility is under discussion.  
slides icon Slides MOY01 [52.421 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOY01  
About • Received ※ 05 October 2021 — Revised ※ 08 October 2021 — Accepted ※ 13 October 2021 — Issued ※ 18 October 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
MOPSA11 Room Temperature Folding Segment for a Transfer of Multiple Charge States Uranium Ions Between Sections of Linac-100 linac, simulation, electron, emittance 153
 
  • V.S. Dyubkov
    MEPhI, Moscow, Russia
 
  Beam dynamics simulations results of multiple charge states uranium ions (238U59+,60+,61+) in a transfer line between two LINAC-100 superconducting sections of DERICA project (JINR, Dubna, Russia) are presented. Transfer line is an advanced magnetic optical system and provides beams bending on 180 degrees. Transfer line options are proposed. Parameters of its optic element are chosen so that dispersion function has zero value at the start and end of the channel for transporting the 50 MeV/nucleon ion beams.  
DOI • reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOPSA11  
About • Received ※ 28 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 17 October 2021  
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
TUPSB48 Optimization of the Geometric Characteristics of the Laser Beam in a Multi-Pass Scheme of Nonlinear Amplification of the Master Oscillator Illumination laser, plasma, ion-source, experiment 327
 
  • Yu.A. Satov, A. Balabaev, I.A. Khrisanov, T. Kulevoy, A.A. Losev, A. Shumshurov, A.A. Vasilyev
    ITEP, Moscow, Russia
 
  The paper presents the results of numerical simulation of the CO₂ MOPA laser scheme which is designed to generate powerful short radiation pulses in the ion source circuit. It is based on the nonlinear nature of the amplification of the master-oscillator pulse radiation, the front of which is formed by a nonlinear absorber. The paper considers the influence of the geometric parameters of the entrance beam in a four-pass amplification scheme. It is shown that for a fixed value of the small signal gain the maximum amplification effect is achieved with a certain formation of the spatial characteristics of the laser beam at the input to the amplifier. So some central uniform part of MO beam which has a Gaussian spatial profile is used in the telescopic amplifier. In this case, despite significant aperture losses, the maximum energy at the output of the amplifier is achieved with optimizing the beam diameter.  
DOI • reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-TUPSB48  
About • Received ※ 24 September 2021 — Revised ※ 26 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 19 October 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEA02 Acceleration the Beams of He⁺ and Fe14+ Ions by HILAC and its Injection into NICA Booster in its Second Run ion-source, booster, laser, injection 65
 
  • K.A. Levterov, V.P. Akimov, A.M. Bazanov, A.V. Butenko, D.E. Donets, D.S. Letkin, D.O. Leushin, D.A. Lyuosev, A.A. Martynov, V.V. Mialkovskiy, D.O. Ponkin, I.V. Shirikov, A.O. Sidorin, A. Tuzikov
    JINR/VBLHEP, Dubna, Moscow region, Russia
  • D. Egorov, A.R. Galimov, B.V. Golovenskiy, A. Govorov, V.V. Kobets, A.D. Kovalenko, V.A. Monchinsky, E. Syresin, G.V. Trubnikov
    JINR, Dubna, Moscow Region, Russia
 
  Injector of NICA accelerating facility based on the Heavy Ion Linear Accelerator (HILAC) is aimed to inject the heavy ions having atomic number A~200 and ratio A/Z - 6.25 produced by ESIS ion source accelerated up to the 3.2 MeV for the injection into superconducting synchrotron (SC) Booster. The project output energy of HILAC was verified on commissioning in 2018 using the beams of carbon ions produced with the Laser Ion Source and having ratio A/Z=6 that is close to the project one. Beams of He1+ ions were injected into Booster in its first run and accelerated in 2020. In 2021 ions of Fe14+ produced with the LIS were injected and accelerated up to 200 MeV/u. Beam formation of Fe ions and perspectives of using LIS for the production the ions with high atomic mass A and ratio A/Z matching to HILAC input parameters are described.  
slides icon Slides WEA02 [12.908 MB]  
DOI • reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-WEA02  
About • Received ※ 07 October 2021 — Revised ※ 08 October 2021 — Accepted ※ 13 October 2021 — Issued ※ 14 October 2021
Cite • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)