PCaPAC2018 - List of Keywords (data-acquisition)

Paper	Title	Other Keywords	Page
WEC3	Overview and Status of the SHINE Control System	controls, interface, network, software	11
	Y.B. Yan, G.H. Chen, J.F. Chen, J.G. Ding, Y.B. Leng SSRF, Shanghai, People’s Republic of China Y.J. Liu, H.H. Lv, Q.R. Mi, H.F. Miao, H.Y. Wang, C.L. Yu, P.X. Yu, H. Zhao SINAP, Shanghai, People’s Republic of China
	The high-gain free electron lasers have given scientists hopes for new scientific discoveries in many frontier research areas. The Shanghai HIgh repetition rate XFEL aNd Extreme light facility (SHINE) was proposed by the central government of P.R. China on April 2017, which is a quasi-continuous wave hard X-ray free electron laser facility. The control system is responsible for the facility-wide device control, data acquisition, machine protection, high level database or application, as well as network and computing platform. It will be mainly based on EPICS to reach the balance between the high performance and costs of maintenance. The latest technology will be adopted for the high repetition rate data acquisition and feedback system. The details of the control system design will be reported in this paper.
	Slides WEC3 [7.255 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-PCaPAC2018-WEC3
About •	paper received ※ 25 September 2018 paper accepted ※ 15 October 2018 issue date ※ 21 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP16	Remote Waveform Access Supports with EPICS for TPS and TLS Control Systems	EPICS, controls, synchrotron, Ethernet	198
	Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.Y. Liao, C.Y. Wu NSRRC, Hsinchu, Taiwan
	To eliminate long distance cabling for improving signal quality, the remote waveform access supports have been developed and applied on the TPS (Taiwan Photon Source) and TLS (Taiwan Light Source) control systems. Waveforms include pulse magnets power supplies waveforms, AC waveforms of main power supplies, LLRF waveforms, beam signals, etc., and these are necessary to be monitored during routine beam operation. One is that use the EPICS-embedded data acquisition systems which are formed by the Zynq System-on-Chip architecture to capture the waveform signals; the other is that a dedicated EPICS IOC is used to communicate with the present Ethernet-based oscilloscopes to acquire each waveform data. According to specific purposes use, the different graphical applications have been developed and integrated into the existing operation interfaces. These are convenient to observe waveform status and to analyze the acquired data on the control consoles. The efforts are described at this paper.
	Poster THP16 [0.656 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-PCaPAC2018-THP16
About •	paper received ※ 10 October 2018 paper accepted ※ 15 October 2018 issue date ※ 21 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRCB1	Ultra Fast Data Acquisition in ELI Beamlines	laser, interface, FPGA, controls	230
	P. Bastl Institute of Physics of the ASCR, Prague, Czech Republic V. Gaman, O. Janda, P. Pivonka, B. Plötzeneder, J. Sys, J. Trdlicka ELI-BEAMS, Prague, Czech Republic
	The ELI Beamlines facility is a Petawatt laser facility in the final construction and commissioning phase in Czech Republic. In fully operation phase, four lasers will be used to control beamlines in six experimental halls. In this paper we describe Ultra fast and distributed data acquisition system as was defined in ELI Beamlines. The data acquisition system is divided into two levels: central and local level. The central level data acquisition system defines a special Tier 0 RAM buffer. This buffer is based on special multi node data acquisition server which shares memory of all its nodes into one continuous space over low latency network technologies (Mellanox Infinband/Intel OmniPath). The main role of the Tier 0 buffer is to acquire first bunch and provide load balancing of incoming data. These data comes from many sources distributed along the experimental technologies. The local data acquisition system is then responsible for connection of local detectors to central data acquisition server through ROCE interface. The connection is done directly when supported or indirectly using local data acquisition computers (for PCIe etc.).
	Slides FRCB1 [1.830 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-PCaPAC2018-FRCB1
About •	paper received ※ 10 October 2018 paper accepted ※ 15 October 2018 issue date ※ 21 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

WEC3

Overview and Status of the SHINE Control System

controls, interface, network, software

11

Y.B. Yan, G.H. Chen, J.F. Chen, J.G. Ding, Y.B. Leng
SSRF, Shanghai, People’s Republic of China
Y.J. Liu, H.H. Lv, Q.R. Mi, H.F. Miao, H.Y. Wang, C.L. Yu, P.X. Yu, H. Zhao
SINAP, Shanghai, People’s Republic of China

The high-gain free electron lasers have given scientists hopes for new scientific discoveries in many frontier research areas. The Shanghai HIgh repetition rate XFEL aNd Extreme light facility (SHINE) was proposed by the central government of P.R. China on April 2017, which is a quasi-continuous wave hard X-ray free electron laser facility. The control system is responsible for the facility-wide device control, data acquisition, machine protection, high level database or application, as well as network and computing platform. It will be mainly based on EPICS to reach the balance between the high performance and costs of maintenance. The latest technology will be adopted for the high repetition rate data acquisition and feedback system. The details of the control system design will be reported in this paper.

Slides WEC3 [7.255 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-PCaPAC2018-WEC3

About •

paper received ※ 25 September 2018 paper accepted ※ 15 October 2018 issue date ※ 21 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP16

Remote Waveform Access Supports with EPICS for TPS and TLS Control Systems

EPICS, controls, synchrotron, Ethernet

198

Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.Y. Liao, C.Y. Wu
NSRRC, Hsinchu, Taiwan

To eliminate long distance cabling for improving signal quality, the remote waveform access supports have been developed and applied on the TPS (Taiwan Photon Source) and TLS (Taiwan Light Source) control systems. Waveforms include pulse magnets power supplies waveforms, AC waveforms of main power supplies, LLRF waveforms, beam signals, etc., and these are necessary to be monitored during routine beam operation. One is that use the EPICS-embedded data acquisition systems which are formed by the Zynq System-on-Chip architecture to capture the waveform signals; the other is that a dedicated EPICS IOC is used to communicate with the present Ethernet-based oscilloscopes to acquire each waveform data. According to specific purposes use, the different graphical applications have been developed and integrated into the existing operation interfaces. These are convenient to observe waveform status and to analyze the acquired data on the control consoles. The efforts are described at this paper.

Poster THP16 [0.656 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-PCaPAC2018-THP16

About •

paper received ※ 10 October 2018 paper accepted ※ 15 October 2018 issue date ※ 21 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRCB1

Ultra Fast Data Acquisition in ELI Beamlines

laser, interface, FPGA, controls

230

P. Bastl
Institute of Physics of the ASCR, Prague, Czech Republic
V. Gaman, O. Janda, P. Pivonka, B. Plötzeneder, J. Sys, J. Trdlicka
ELI-BEAMS, Prague, Czech Republic

The ELI Beamlines facility is a Petawatt laser facility in the final construction and commissioning phase in Czech Republic. In fully operation phase, four lasers will be used to control beamlines in six experimental halls. In this paper we describe Ultra fast and distributed data acquisition system as was defined in ELI Beamlines. The data acquisition system is divided into two levels: central and local level. The central level data acquisition system defines a special Tier 0 RAM buffer. This buffer is based on special multi node data acquisition server which shares memory of all its nodes into one continuous space over low latency network technologies (Mellanox Infinband/Intel OmniPath). The main role of the Tier 0 buffer is to acquire first bunch and provide load balancing of incoming data. These data comes from many sources distributed along the experimental technologies. The local data acquisition system is then responsible for connection of local detectors to central data acquisition server through ROCE interface. The connection is done directly when supported or indirectly using local data acquisition computers (for PCIe etc.).

Slides FRCB1 [1.830 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-PCaPAC2018-FRCB1

About •

paper received ※ 10 October 2018 paper accepted ※ 15 October 2018 issue date ※ 21 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)