PCaPAC2018 - List of Keywords (Ethernet)

Paper	Title	Other Keywords	Page
WEP11	EtherCAT Solution for the TPS Control System	controls, EPICS, insertion, insertion-device	57
	C.Y. Liao, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.Y. Wu NSRRC, Hsinchu, Taiwan
	The EtherCAT real-time Ethernet technology is now widely used in the field of industrial automation. This paper is to evaluate and establish the EtherCAT (Ethernet for Control Automation Technology) solution for digital and analogue I/O and motion control in accelerator applications. Thanks to developments at the Diamond Light Source, EtherCAT is integrated into EPICS with support for most devices of a general data type. Preliminary tests and plans are summarized in this report.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-PCaPAC2018-WEP11
About •	paper received ※ 09 October 2018 paper accepted ※ 17 October 2018 issue date ※ 21 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP16	Remote Waveform Access Supports with EPICS for TPS and TLS Control Systems	EPICS, controls, data-acquisition, synchrotron	198
	Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.Y. Liao, C.Y. Wu NSRRC, Hsinchu, Taiwan
	To eliminate long distance cabling for improving signal quality, the remote waveform access supports have been developed and applied on the TPS (Taiwan Photon Source) and TLS (Taiwan Light Source) control systems. Waveforms include pulse magnets power supplies waveforms, AC waveforms of main power supplies, LLRF waveforms, beam signals, etc., and these are necessary to be monitored during routine beam operation. One is that use the EPICS-embedded data acquisition systems which are formed by the Zynq System-on-Chip architecture to capture the waveform signals; the other is that a dedicated EPICS IOC is used to communicate with the present Ethernet-based oscilloscopes to acquire each waveform data. According to specific purposes use, the different graphical applications have been developed and integrated into the existing operation interfaces. These are convenient to observe waveform status and to analyze the acquired data on the control consoles. The efforts are described at this paper.
	Poster THP16 [0.656 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-PCaPAC2018-THP16
About •	paper received ※ 10 October 2018 paper accepted ※ 15 October 2018 issue date ※ 21 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

WEP11

EtherCAT Solution for the TPS Control System

controls, EPICS, insertion, insertion-device

57

C.Y. Liao, Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.Y. Wu
NSRRC, Hsinchu, Taiwan

The EtherCAT real-time Ethernet technology is now widely used in the field of industrial automation. This paper is to evaluate and establish the EtherCAT (Ethernet for Control Automation Technology) solution for digital and analogue I/O and motion control in accelerator applications. Thanks to developments at the Diamond Light Source, EtherCAT is integrated into EPICS with support for most devices of a general data type. Preliminary tests and plans are summarized in this report.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-PCaPAC2018-WEP11

About •

paper received ※ 09 October 2018 paper accepted ※ 17 October 2018 issue date ※ 21 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THP16

Remote Waveform Access Supports with EPICS for TPS and TLS Control Systems

EPICS, controls, data-acquisition, synchrotron

198

Y.-S. Cheng, K.T. Hsu, K.H. Hu, C.Y. Liao, C.Y. Wu
NSRRC, Hsinchu, Taiwan

To eliminate long distance cabling for improving signal quality, the remote waveform access supports have been developed and applied on the TPS (Taiwan Photon Source) and TLS (Taiwan Light Source) control systems. Waveforms include pulse magnets power supplies waveforms, AC waveforms of main power supplies, LLRF waveforms, beam signals, etc., and these are necessary to be monitored during routine beam operation. One is that use the EPICS-embedded data acquisition systems which are formed by the Zynq System-on-Chip architecture to capture the waveform signals; the other is that a dedicated EPICS IOC is used to communicate with the present Ethernet-based oscilloscopes to acquire each waveform data. According to specific purposes use, the different graphical applications have been developed and integrated into the existing operation interfaces. These are convenient to observe waveform status and to analyze the acquired data on the control consoles. The efforts are described at this paper.

Poster THP16 [0.656 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-PCaPAC2018-THP16

About •

paper received ※ 10 October 2018 paper accepted ※ 15 October 2018 issue date ※ 21 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)