LINAC2018 - List of Keywords (collider)

Paper	Title	Other Keywords	Page
MOPO116	Study on the Control Technology of Large-load Time Constant Accelerator Magnet Power Supply	controls, power-supply, simulation, superconducting-magnet	239
	X. Wang, F. Long IHEP, Beijing, People’s Republic of China
	With the increasing application of power supply to industrial system, digital control system has become the mainstream of modern industrial control system. The wide application of digital control system has also led to the rapid development of digital controller. In the field of accelerator magnet power supply, the adoption of digital closed-loop control has become a trend in recent years. Due to the system’s tracking and regulation characteristics, the output current will slowly track the change of the given value in the course of the given current gradually rising. When the system reaches steady state, the disturbance of the system requires the regulator to adjust at a faster rate to correct the impact of the disturbance on the system. Today’s digital power supply control method mainly reflected in when load time constant is large, interference or load change, the power output is prone to overshoot or adjust the time is long, so the tracking and adjustment features cannot be met simultaneously. Therefore, this paper will study the power supply digital control technology for large - load time constant and the independent control method of tracking and regulating.
	Poster MOPO116 [0.307 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-MOPO116
About •	paper received ※ 21 August 2018 paper accepted ※ 31 October 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO022	Manufacturing of X-band Accelerating Structures: Metrology Analysis and Process Capability	controls, GUI, linac, linear-collider	374
	J. Sauza-Bedolla, S. Atieh, N. Catalán Lasheras CERN, Geneva, Switzerland
	The fabrication tolerances of RF components are essential for CLIC X-band accelerating structures to perform efficiently. On one hand, the capability of high power accelerating structures depends on the shape accuracy and the asperity of the inner surfaces, when microwaves pass through the cavity. On the other hand, surface flatness and dimensional tolerances are necessary to guarantee a correct assembly process. Hence, the discs that build up the structure require sub-micrometre specifications and, in order to meet all the needs, ultra-precision machining using single crystal diamond tools is mandatory. This paper shows the analysis of the metrology results of the fabrication of 118 discs (4 accelerating structures). Dimensional and form tolerances are studied following the production order to find drifts in the production and to predict the impact on the assembly process. Finally, process capability is evaluated.
	Poster TUPO022 [2.987 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO022
About •	paper received ※ 10 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO057	Low-temperature Baking and Infusion Studies for High-gradient ILC SRF Cavities	cavity, SRF, GUI, linear-collider	466
	M. Ge, P.N. Koufalis, G. Kulina, M. Liepe, J.T. Maniscalco Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA
	Low-temperature infusion has become a hot-topic in SRF researches recently. Past results show that low-temperature infusion can produce high quality factor at medium accelerating fields. Also, 75°C baking recently has been shown to improve accelerating gradients of SRF cavities. Hence these treatments are very promising for reducing cost of the ILC. In this work, we present latest results of low temperature infusion and baking, showing that these treatments can improve SRF cavities performance.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO057
About •	paper received ※ 19 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO064	Pre-study of CEPC SRF Cavity	cavity, SRF, cryomodule, electron	476
	P. Sha Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People’s Republic of China J. Dai, C. Dong, H.F.S. Feisi, S. Jin, Z.Q. Li, B.Q. Liu, Z.H. Mi, J.Y. Zhai, X.Y. Zhang, H.J. Zheng IHEP, Beijing, People’s Republic of China J.K. Hao, F. Wang PKU, Beijing, People’s Republic of China
	Funding: This study was supported by National Key Programme for S&T Research and Development (Grant NO.: 2016YFA0400400) and National Natural Science Foundation of China (Grant NO.:11505197). CEPC will use 650 MHz cavities for the collider and 1.3 GHz cavities for the Booster. Each booster cryomod-ule contains eight 1.3 GHz 9-cell cavities, which is simi-lar as LCLS-II, E-XFEL and ILC. Each collider cryo-module contains six 650 MHz 2-cell cavities, which is totally new. Therefore, the pre-study mainly focuses on the 650 MHz 2-cell cavity. N-doping and vertical tests of 650 MHz 1-cell and 2-cell cavities have been carried out at IHEP, which have achieved good results. A test cryomodule, which consists of two 650 MHz 2-cell cavities, has also begun as the first step to the full-scale cryomodule.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO064
About •	paper received ※ 31 August 2018 paper accepted ※ 19 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO002	Investigation of SRF Elliptical Cavities Made by New Nb Materials in KEK	cavity, niobium, superconducting-RF, SRF	676
	T. Dohmae, K. Umemori, Y. Watanabe, M. Yamanaka KEK, Ibaraki, Japan T. Okada Sokendai, Ibaraki, Japan
	Cost reduction for cavity fabrication is currently main issue to realize international linear collider. Cavity fabrication facility (CFF) in KEK is approaching this issue from a point of view of materials for cavities. CFF had fabricated SRF elliptical cavities made by two types of niobium; one is high tantalum contained and low RRR (< 100) fine grain niobium, and the other is high tantalum contained and RRR < 300 large grain (LG) niobium. Former was melted two times (normally five times) which results RRR recovery up to around 300, and used for cell parts. Two 3-cell cavities were fabricated for each material respectively and vertical tested. One of these cavity made by LG achieved accelerator gradients of more than 40 MV/m. In this report, cavity materials and vertical test results are presented in detail.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO002
About •	paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO003	L-band Resonant Ring for Testing RF Windows for ILC	simulation, coupling, klystron, linear-collider	679
	B. Du, N. Liu Sokendai - Hayama, Hayama, Japan T. Matsumoto, S. Michizono, T. Miura, F. Qiu KEK, Ibaraki, Japan T. Matsumoto, T. Miura, F. Qiu Sokendai, Ibaraki, Japan
	A resonant ring is widely used for the breakdown test of RF components under high power. It can reach power gain of more than 10dB, which is limited by the attenua-tion of the ring. An L-band resonant ring is constructed for testing RF components of International Linear Collid-er (ILC) which is based on an RF frequency of 1.3GHz. The target of the high power test is 5 MW. We have fin-ished the test of an input power of 500 W using a solid state amplifier, and the principle of the resonant ring is verified. The resonant ring is tuned to an optimal condi-tion, which is preparation for high power operation. This paper details the principle, construction, and test of the L-band resonant ring.
	Poster THPO003 [2.301 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO003
About •	paper received ※ 13 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO005	High Aspect Ratio Beam Generation with the Phase-space Rotation Technique for Linear Colliders	emittance, gun, simulation, linear-collider	685
	M. Kuriki HU/AdSM, Higashi-Hiroshima, Japan H. Hayano, X.J. Jin, T. Konomi, Y. Seimiya, N. Yamamoto KEK, Ibaraki, Japan S. Kashiwagi Tohoku University, Research Center for Electron Photon Science, Sendai, Japan P. Piot Northern Illinois University, DeKalb, Illinois, USA J.G. Power ANL, Argonne, Illinois, USA K. Sakaue Waseda University, Waseda Institute for Advanced Study, Tokyo, Japan M. Washio RISE, Tokyo, Japan H.W. Zhao IMP/CAS, Lanzhou, People’s Republic of China
	Funding: This work is partly supported by Grant-in-Aid for Scientific Research (B) and US-Japan Science and Technology Cooperation Program in High Energy Physics. Linear colliders is the only way to realize e⁺ e⁻ collision at higher energy beyond the limit of ring colliders by the huge synchrotron radiation energy loss. In the linear collider, the beam current should be much smaller comparing to the ring collider to save the required electricity. A way to realize an enough luminosity with the small beam current and less energy spread by Beamstrahlung, is collision in flat beam. This high aspect ratio beam can be made by phase-space rotation technique instead of the conventional way with DR (Damping Ring). We present a simulation of this technique and pilot experiments at KEK-STF and ANL WFA.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO005
About •	paper received ※ 12 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO006	Status of 650 MHz SRF Cavity for eRHIC SRF Linac	cavity, SRF, HOM, linac	688
	W. Xu, I. Ben-Zvi, Y. Gao, D. Holmes, P. Kolb, G.T. McIntyre, R. Porqueddu, K.S. Smith, F.J. Willeke, Q. Wu, A. Zaltsman BNL, Upton, Long Island, New York, USA
	Funding: This work is supported by LDRD program of Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. DOE. A 5-cell 650 MHz SRF cavity was designed for eRHIC SRF linac. One Cu cavity was fabricated for HOM damping study, and one Nb cavity was fabricated for SRF studies. Through various post-processing recipes and vertical tests, the SRF study includes high Q-value study for ERL SRF linac and high gradient study for recirculating linac. This paper reports the HOM damping measurement on the Cu cavity and preliminary vertical test results.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO006
About •	paper received ※ 22 August 2018 paper accepted ※ 08 October 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO018	Building a 12GHz Traveling Wave Accelerating Structure Brazed Through Irises	controls, linac, cavity, electron	721
	V.A. Dolgashev, G.B. Bowden, M. Dal Forno, A.A. Haase SLAC, Menlo Park, California, USA A. Grudiev CERN, Geneva, Switzerland H. Zha TUB, Beijing, People’s Republic of China
	Accelerating structures are usually manufactured by precision turning of individual cells combined with precision milling for complex parts such as rf power couplers. These multiple parts are staked and brazed into a complete structure. We consider an alternative approach: precision milling of multiple cells and couplers into metal blocks that comprise halves or quadrants of the complete structure. We successfully produced a 12~GHz Compact Linear Collider (CLIC) main linac accelerating structure prototype using this method. A previous prototype was designed as an open structure with a gap between cell irises. Here we describe a different approach, an accelerating structure which is brazed through irises. It is based on a multi-cell traveling wave structure designed at CERN for PSI, so called "T24 PSI 12 GHz". This brazed-through irises structure was built at SLAC for high power tests at CERN. Here we describe the details of this process.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO018
About •	paper received ※ 19 September 2018 paper accepted ※ 08 October 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO109	A New Spherical Pulse Compressor Working with Degenerated "Whispering Gallery" Mode	cavity, coupling, GUI, simulation	928
	Z.B. Li, W. Fang, Q. Gu, Z.T. Zhao SINAP, Shanghai, People’s Republic of China A. Grudiev CERN, Geneva, Switzerland
	CLIC is focusing on the Compact Linear Collider. To obtain a relatively high accelerating gradient, CLIC utilizes Pulse Compressors to increase the input power of accelerators. This work is to make an alternative design for CLIC pulse compression scheme. There are several kinds of pulse compressor: SLED, BOC, SLED-Ⅱ, spherical pulse compressor and so on. Usually, a spherical cavity, including BOC, can offer a higher Q factor compared with a cylindrical cavity. This design utilizes a spherical cavity working with degenerated Whispering Gallery mode.
	Slides THPO109 [1.738 MB]
	Poster THPO109 [1.913 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO109
About •	paper received ※ 11 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPO116

Study on the Control Technology of Large-load Time Constant Accelerator Magnet Power Supply

controls, power-supply, simulation, superconducting-magnet

239

X. Wang, F. Long
IHEP, Beijing, People’s Republic of China

With the increasing application of power supply to industrial system, digital control system has become the mainstream of modern industrial control system. The wide application of digital control system has also led to the rapid development of digital controller. In the field of accelerator magnet power supply, the adoption of digital closed-loop control has become a trend in recent years. Due to the system’s tracking and regulation characteristics, the output current will slowly track the change of the given value in the course of the given current gradually rising. When the system reaches steady state, the disturbance of the system requires the regulator to adjust at a faster rate to correct the impact of the disturbance on the system. Today’s digital power supply control method mainly reflected in when load time constant is large, interference or load change, the power output is prone to overshoot or adjust the time is long, so the tracking and adjustment features cannot be met simultaneously. Therefore, this paper will study the power supply digital control technology for large - load time constant and the independent control method of tracking and regulating.

Poster MOPO116 [0.307 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-MOPO116

About •

paper received ※ 21 August 2018 paper accepted ※ 31 October 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO022

Manufacturing of X-band Accelerating Structures: Metrology Analysis and Process Capability

controls, GUI, linac, linear-collider

374

J. Sauza-Bedolla, S. Atieh, N. Catalán Lasheras
CERN, Geneva, Switzerland

The fabrication tolerances of RF components are essential for CLIC X-band accelerating structures to perform efficiently. On one hand, the capability of high power accelerating structures depends on the shape accuracy and the asperity of the inner surfaces, when microwaves pass through the cavity. On the other hand, surface flatness and dimensional tolerances are necessary to guarantee a correct assembly process. Hence, the discs that build up the structure require sub-micrometre specifications and, in order to meet all the needs, ultra-precision machining using single crystal diamond tools is mandatory. This paper shows the analysis of the metrology results of the fabrication of 118 discs (4 accelerating structures). Dimensional and form tolerances are studied following the production order to find drifts in the production and to predict the impact on the assembly process. Finally, process capability is evaluated.

Poster TUPO022 [2.987 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO022

About •

paper received ※ 10 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO057

Low-temperature Baking and Infusion Studies for High-gradient ILC SRF Cavities

cavity, SRF, GUI, linear-collider

466

M. Ge, P.N. Koufalis, G. Kulina, M. Liepe, J.T. Maniscalco
Cornell University (CLASSE), Cornell Laboratory for Accelerator-Based Sciences and Education, Ithaca, New York, USA

Low-temperature infusion has become a hot-topic in SRF researches recently. Past results show that low-temperature infusion can produce high quality factor at medium accelerating fields. Also, 75°C baking recently has been shown to improve accelerating gradients of SRF cavities. Hence these treatments are very promising for reducing cost of the ILC. In this work, we present latest results of low temperature infusion and baking, showing that these treatments can improve SRF cavities performance.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO057

About •

paper received ※ 19 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPO064

Pre-study of CEPC SRF Cavity

cavity, SRF, cryomodule, electron

476

P. Sha
Institute of High Energy Physics (IHEP), Chinese Academy of Sciences, Beijing, People’s Republic of China
J. Dai, C. Dong, H.F.S. Feisi, S. Jin, Z.Q. Li, B.Q. Liu, Z.H. Mi, J.Y. Zhai, X.Y. Zhang, H.J. Zheng
IHEP, Beijing, People’s Republic of China
J.K. Hao, F. Wang
PKU, Beijing, People’s Republic of China

Funding: This study was supported by National Key Programme for S&T Research and Development (Grant NO.: 2016YFA0400400) and National Natural Science Foundation of China (Grant NO.:11505197).
CEPC will use 650 MHz cavities for the collider and 1.3 GHz cavities for the Booster. Each booster cryomod-ule contains eight 1.3 GHz 9-cell cavities, which is simi-lar as LCLS-II, E-XFEL and ILC. Each collider cryo-module contains six 650 MHz 2-cell cavities, which is totally new. Therefore, the pre-study mainly focuses on the 650 MHz 2-cell cavity. N-doping and vertical tests of 650 MHz 1-cell and 2-cell cavities have been carried out at IHEP, which have achieved good results. A test cryomodule, which consists of two 650 MHz 2-cell cavities, has also begun as the first step to the full-scale cryomodule.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO064

About •

paper received ※ 31 August 2018 paper accepted ※ 19 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO002

Investigation of SRF Elliptical Cavities Made by New Nb Materials in KEK

cavity, niobium, superconducting-RF, SRF

676

T. Dohmae, K. Umemori, Y. Watanabe, M. Yamanaka
KEK, Ibaraki, Japan
T. Okada
Sokendai, Ibaraki, Japan

Cost reduction for cavity fabrication is currently main issue to realize international linear collider. Cavity fabrication facility (CFF) in KEK is approaching this issue from a point of view of materials for cavities. CFF had fabricated SRF elliptical cavities made by two types of niobium; one is high tantalum contained and low RRR (< 100) fine grain niobium, and the other is high tantalum contained and RRR < 300 large grain (LG) niobium. Former was melted two times (normally five times) which results RRR recovery up to around 300, and used for cell parts. Two 3-cell cavities were fabricated for each material respectively and vertical tested. One of these cavity made by LG achieved accelerator gradients of more than 40 MV/m. In this report, cavity materials and vertical test results are presented in detail.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO002

About •

paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO003

L-band Resonant Ring for Testing RF Windows for ILC

simulation, coupling, klystron, linear-collider

679

B. Du, N. Liu
Sokendai - Hayama, Hayama, Japan
T. Matsumoto, S. Michizono, T. Miura, F. Qiu
KEK, Ibaraki, Japan
T. Matsumoto, T. Miura, F. Qiu
Sokendai, Ibaraki, Japan

A resonant ring is widely used for the breakdown test of RF components under high power. It can reach power gain of more than 10dB, which is limited by the attenua-tion of the ring. An L-band resonant ring is constructed for testing RF components of International Linear Collid-er (ILC) which is based on an RF frequency of 1.3GHz. The target of the high power test is 5 MW. We have fin-ished the test of an input power of 500 W using a solid state amplifier, and the principle of the resonant ring is verified. The resonant ring is tuned to an optimal condi-tion, which is preparation for high power operation. This paper details the principle, construction, and test of the L-band resonant ring.

Poster THPO003 [2.301 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO003

About •

paper received ※ 13 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO005

High Aspect Ratio Beam Generation with the Phase-space Rotation Technique for Linear Colliders

emittance, gun, simulation, linear-collider

685

M. Kuriki
HU/AdSM, Higashi-Hiroshima, Japan
H. Hayano, X.J. Jin, T. Konomi, Y. Seimiya, N. Yamamoto
KEK, Ibaraki, Japan
S. Kashiwagi
Tohoku University, Research Center for Electron Photon Science, Sendai, Japan
P. Piot
Northern Illinois University, DeKalb, Illinois, USA
J.G. Power
ANL, Argonne, Illinois, USA
K. Sakaue
Waseda University, Waseda Institute for Advanced Study, Tokyo, Japan
M. Washio
RISE, Tokyo, Japan
H.W. Zhao
IMP/CAS, Lanzhou, People’s Republic of China

Funding: This work is partly supported by Grant-in-Aid for Scientific Research (B) and US-Japan Science and Technology Cooperation Program in High Energy Physics.
Linear colliders is the only way to realize e⁺ e⁻ collision at higher energy beyond the limit of ring colliders by the huge synchrotron radiation energy loss. In the linear collider, the beam current should be much smaller comparing to the ring collider to save the required electricity. A way to realize an enough luminosity with the small beam current and less energy spread by Beamstrahlung, is collision in flat beam. This high aspect ratio beam can be made by phase-space rotation technique instead of the conventional way with DR (Damping Ring). We present a simulation of this technique and pilot experiments at KEK-STF and ANL WFA.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO005

About •

paper received ※ 12 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO006

Status of 650 MHz SRF Cavity for eRHIC SRF Linac

cavity, SRF, HOM, linac

688

W. Xu, I. Ben-Zvi, Y. Gao, D. Holmes, P. Kolb, G.T. McIntyre, R. Porqueddu, K.S. Smith, F.J. Willeke, Q. Wu, A. Zaltsman
BNL, Upton, Long Island, New York, USA

Funding: This work is supported by LDRD program of Brookhaven Science Associates, LLC under Contract No. DE-AC02-98CH10886 with the U.S. DOE.
A 5-cell 650 MHz SRF cavity was designed for eRHIC SRF linac. One Cu cavity was fabricated for HOM damping study, and one Nb cavity was fabricated for SRF studies. Through various post-processing recipes and vertical tests, the SRF study includes high Q-value study for ERL SRF linac and high gradient study for recirculating linac. This paper reports the HOM damping measurement on the Cu cavity and preliminary vertical test results.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO006

About •

paper received ※ 22 August 2018 paper accepted ※ 08 October 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO018

Building a 12GHz Traveling Wave Accelerating Structure Brazed Through Irises

controls, linac, cavity, electron

721

V.A. Dolgashev, G.B. Bowden, M. Dal Forno, A.A. Haase
SLAC, Menlo Park, California, USA
A. Grudiev
CERN, Geneva, Switzerland
H. Zha
TUB, Beijing, People’s Republic of China

Accelerating structures are usually manufactured by precision turning of individual cells combined with precision milling for complex parts such as rf power couplers. These multiple parts are staked and brazed into a complete structure. We consider an alternative approach: precision milling of multiple cells and couplers into metal blocks that comprise halves or quadrants of the complete structure. We successfully produced a 12~GHz Compact Linear Collider (CLIC) main linac accelerating structure prototype using this method. A previous prototype was designed as an open structure with a gap between cell irises. Here we describe a different approach, an accelerating structure which is brazed through irises. It is based on a multi-cell traveling wave structure designed at CERN for PSI, so called "T24 PSI 12 GHz". This brazed-through irises structure was built at SLAC for high power tests at CERN. Here we describe the details of this process.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO018

About •

paper received ※ 19 September 2018 paper accepted ※ 08 October 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO109

A New Spherical Pulse Compressor Working with Degenerated "Whispering Gallery" Mode

cavity, coupling, GUI, simulation

928

Z.B. Li, W. Fang, Q. Gu, Z.T. Zhao
SINAP, Shanghai, People’s Republic of China
A. Grudiev
CERN, Geneva, Switzerland

CLIC is focusing on the Compact Linear Collider. To obtain a relatively high accelerating gradient, CLIC utilizes Pulse Compressors to increase the input power of accelerators. This work is to make an alternative design for CLIC pulse compression scheme. There are several kinds of pulse compressor: SLED, BOC, SLED-Ⅱ, spherical pulse compressor and so on. Usually, a spherical cavity, including BOC, can offer a higher Q factor compared with a cylindrical cavity. This design utilizes a spherical cavity working with degenerated Whispering Gallery mode.

Slides THPO109 [1.738 MB]

Poster THPO109 [1.913 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO109

About •

paper received ※ 11 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)