The Joint Accelerator Conferences Website (JACoW) is an international collaboration that publishes the proceedings of accelerator conferences held around the world.
TY - CONF AU - Dohmae, T. AU - Okada, T. AU - Umemori, K. AU - Watanabe, Y. AU - Yamanaka, M. ED - Pei, Guoxi ED - Schaa, Volker RW ED - Chin, Yong Ho ED - Fu, Shinian ED - Zhao, Ning TI - Investigation of SRF Elliptical Cavities Made by New Nb Materials in KEK J2 - Proc. of LINAC2018, Beijing, China, 16-21 September 2018 CY - Beijing, China T2 - Linear Accelerator Conference T3 - 29 LA - english AB - Cost reduction for cavity fabrication is currently main issue to realize international linear collider. Cavity fabrication facility (CFF) in KEK is approaching this issue from a point of view of materials for cavities. CFF had fabricated SRF elliptical cavities made by two types of niobium; one is high tantalum contained and low RRR (< 100) fine grain niobium, and the other is high tantalum contained and RRR < 300 large grain (LG) niobium. Former was melted two times (normally five times) which results RRR recovery up to around 300, and used for cell parts. Two 3-cell cavities were fabricated for each material respectively and vertical tested. One of these cavity made by LG achieved accelerator gradients of more than 40 MV/m. In this report, cavity materials and vertical test results are presented in detail. PB - JACoW Publishing CP - Geneva, Switzerland SP - 676 EP - 678 KW - cavity KW - niobium KW - collider KW - superconducting-RF KW - SRF DA - 2019/01 PY - 2019 SN - 2226-0366 SN - 978-3-95450-194-6 DO - DOI: 10.18429/JACoW-LINAC2018-THPO002 UR - http://jacow.org/linac2018/papers/thpo002.pdf ER -