IBIC2015 - List of Authors (Murokh, A.Y.)

Paper	Title	Page
MOPB081	Sub-Picosecond Shot-to-Shot Electron Beam and Laser Timing Using a Photoconductive THz Antenna	243
	E.J. Curry, P. Musumeci UCLA, Los Angeles, California, USA B.T. Jacobson, A.Y. Murokh RadiaBeam, Santa Monica, California, USA
	Temporal synchronization systems, which measure electron beam time of arrival with respect to a laser pulse, are critical for operation of advanced laser-driven accelerators and light sources. State-of-the-art synchronization tools, relying on electronic e-beam response and photodetector laser response are limited to few GHz bandwidths in most practical configurations. This paper presents a temporal diagnostic instrumentation based upon a photoconductive THz antenna, which could offer an inexpensive and user friendly method to provide shot-to-shot relative time of arrival information with sub-picosecond accuracy. We describe the overall instrument design and proof-of-concept prototype results at the UCLA PEGASUS facility.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

TUPB085	Multi-Diagnostic Transverse Profile Monitor Chamber for Extreme Ultraviolet Lithography	554
	T.J. Campese, R.B. Agustsson, M.A. Harrison, B.T. Jacobson, A.Y. Murokh, A.G. Ovodenko, M. Ruelas, H.L. To RadiaBeam, Santa Monica, California, USA M.G. Fedurin, I. Pogorelsky, T.V. Shaftan BNL, Upton, Long Island, New York, USA
	Funding: DOE SBIR Grant No DE-SC0007703 RadiaBeam Technologies has developed a compact transverse beam profile measurement system for the Extreme Ultraviolet Lithography (EUL) experiment at the Brookhaven National Laboratory-Accelerator Test Facility (BNL-ATF). The EUL experiment requires fine e-beam and laser alignment across multiple passes. To accomplish this, the system consists of four profile monitor diagnostics: Interaction Point (IP), upstream, downstream, and a sub-micron resolution diagnostic 11.5 mm downstream of the IP. Care was taken in the design to minimize footprint, avoid possible diagnostic collisions, and maximize ease of assembly and alignment. This paper will review the requirements for the dimensional and optical constraints and solutions for this experiment.
	Poster TUPB085 [0.575 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

Paper

Title

Page

Sub-Picosecond Shot-to-Shot Electron Beam and Laser Timing Using a Photoconductive THz Antenna

243

E.J. Curry, P. Musumeci
UCLA, Los Angeles, California, USA
B.T. Jacobson, A.Y. Murokh
RadiaBeam, Santa Monica, California, USA

Temporal synchronization systems, which measure electron beam time of arrival with respect to a laser pulse, are critical for operation of advanced laser-driven accelerators and light sources. State-of-the-art synchronization tools, relying on electronic e-beam response and photodetector laser response are limited to few GHz bandwidths in most practical configurations. This paper presents a temporal diagnostic instrumentation based upon a photoconductive THz antenna, which could offer an inexpensive and user friendly method to provide shot-to-shot relative time of arrival information with sub-picosecond accuracy. We describe the overall instrument design and proof-of-concept prototype results at the UCLA PEGASUS facility.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)

TUPB085

Multi-Diagnostic Transverse Profile Monitor Chamber for Extreme Ultraviolet Lithography

554

T.J. Campese, R.B. Agustsson, M.A. Harrison, B.T. Jacobson, A.Y. Murokh, A.G. Ovodenko, M. Ruelas, H.L. To
RadiaBeam, Santa Monica, California, USA
M.G. Fedurin, I. Pogorelsky, T.V. Shaftan
BNL, Upton, Long Island, New York, USA

Funding: DOE SBIR Grant No DE-SC0007703
RadiaBeam Technologies has developed a compact transverse beam profile measurement system for the Extreme Ultraviolet Lithography (EUL) experiment at the Brookhaven National Laboratory-Accelerator Test Facility (BNL-ATF). The EUL experiment requires fine e-beam and laser alignment across multiple passes. To accomplish this, the system consists of four profile monitor diagnostics: Interaction Point (IP), upstream, downstream, and a sub-micron resolution diagnostic 11.5 mm downstream of the IP. Care was taken in the design to minimize footprint, avoid possible diagnostic collisions, and maximize ease of assembly and alignment. This paper will review the requirements for the dimensional and optical constraints and solutions for this experiment.

Poster TUPB085 [0.575 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text, ※ RIS/RefMan, ※ EndNote (xml)