MEDSI2016 - List of Keywords (diagnostics)

Paper	Title	Other Keywords	Page
MOPE27	The Influences of Material Properties to Micro Damages on Vacuum Chamber CF Flanges	ion, vacuum, FEL, simulation	63
	S. Vilcins, M. Holz, M. Lemke, D. Nölle, Ch. Wiebers DESY, Hamburg, Germany
	The European-XFEL, a 3.3 km long X-Ray laser facility, powered by a 17.5 GeV superconducting linear accelerator, is located at DESY in Hamburg [1]. For the diagnostics ultra-high vacuum components with high mechanical precision and strict requirements on particle cleanliness had to be developed, designed and produced. For the screen system of the facility, enabling to observe the size and shape of the electron beam, massive vessels, precisely milled out of stainless steel blocks 1.4435 (316L) have been produced. For these chambers all flange-connections are milled into these blocks. This paper will report onμdamages in these integrated knife edges and will present simulations of the damage mechanisms. It will also describe the influences of material properties of two different stainless steel brands, effects on the ¿knife edge¿ due to the penetration into the gaskets as well as the non-elastic deformation of the sealing area. The dependence of tightening forces under special conditions, like the very clean conditions in particle free applications due to the non-lubricated conditions will be reported. A ¿cooking recipe¿ to avoid suchμdamages will be given.
	Poster MOPE27 [0.187 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-MOPE27
About •	paper received ※ 09 September 2016 paper accepted ※ 23 September 2016 issue date ※ 22 June 2017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPE40	Designing the Flash II Photon Diagnostic Beamline and Components	ion, vacuum, experiment, photon	96
	D. Meissner, M. Brachmanski, M. Hesse, U. Jastrow, M. Kuhlmann, H. Mahn, F. Marutzky, E. Plönjes-Palm, M. Röhling, H. Schulte-Schrepping, K.I. Tiedtke, R. Treusch DESY, Hamburg, Germany
	From 2013 to 2016 the free electron laser FLASH at DESY in Hamburg, Germany was upgraded with a second undulator line, photon diagnostic line, beam distribution and experimental hall connected to the same linear accelerator. This paper shows the layout of the photon diagnostic section and an overview of the civil engineering challenges. The mechanical design of selected components, e.g. vacuum components, diagnostic equipment and safety related components is presented.
	Poster MOPE40 [1.081 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-MOPE40
About •	paper received ※ 08 September 2016 paper accepted ※ 21 September 2016 issue date ※ 22 June 2017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPE36	Design, Construction and Commissioning of Two Highly Integrated Experimental Stations for Micro-Focusing Macromolecular Crystallography Beamlines at NSLS-II	ion, experiment, focusing, synchrotron	363
	D.K. Bhogadi, B.A. Andi, L. Berman, M. Carlucci-Dayton, M.R. Fuchs, J. Jakoncic, T. Langdon, J. Lara, B.S. Martins, S. McSweeney, S.F. Myers, D.K. Schneider, R.M. Sweet BNL, Upton, Long Island, New York, USA
	Funding: This work is supported by the US National Institutes of Health and the US Department of Energy. We present the final engineering design and first commissioning results of two highly integrated experimental stations for the micro-focusing (FMX) and the highly automated (AMX) MX beamlines at the NSLS-II. These beamlines will support a broad range of biomedical structure determination methods. The experimental stations are designed and fabricated in-house to meet the challenging requirements resulting from the small beam size of 1 µm and the extremely short working distance of only 190 mm from the beam exit window to the FMX focal spot. The compact beam conditioning unit contains, within 140 mm, a beam position monitor, an attenuator, primary slits, an intensity monitor, a sub-millisecond shutter, and secondary slits. The diffractometers consist of an interchangeable dual axis air bearing-based goniometers with a target sphere of confusion of 100 nm, an on-axis microscope, an x-ray fluorescence detector and dynamic beam shaping slits. The end stations are integrated in a compact space on a granite machine bed with high modularity for future upgrades and extensions. Real-time autonomous robotic systems are being implemented for high through-put cryogenic sample handling.
	Poster WEPE36 [2.369 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-WEPE36
About •	paper received ※ 11 September 2016 paper accepted ※ 05 October 2016 issue date ※ 22 June 2017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPE27

The Influences of Material Properties to Micro Damages on Vacuum Chamber CF Flanges

ion, vacuum, FEL, simulation

63

S. Vilcins, M. Holz, M. Lemke, D. Nölle, Ch. Wiebers
DESY, Hamburg, Germany

The European-XFEL, a 3.3 km long X-Ray laser facility, powered by a 17.5 GeV superconducting linear accelerator, is located at DESY in Hamburg [1]. For the diagnostics ultra-high vacuum components with high mechanical precision and strict requirements on particle cleanliness had to be developed, designed and produced. For the screen system of the facility, enabling to observe the size and shape of the electron beam, massive vessels, precisely milled out of stainless steel blocks 1.4435 (316L) have been produced. For these chambers all flange-connections are milled into these blocks. This paper will report onμdamages in these integrated knife edges and will present simulations of the damage mechanisms. It will also describe the influences of material properties of two different stainless steel brands, effects on the ¿knife edge¿ due to the penetration into the gaskets as well as the non-elastic deformation of the sealing area. The dependence of tightening forces under special conditions, like the very clean conditions in particle free applications due to the non-lubricated conditions will be reported. A ¿cooking recipe¿ to avoid suchμdamages will be given.

Poster MOPE27 [0.187 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-MOPE27

About •

paper received ※ 09 September 2016 paper accepted ※ 23 September 2016 issue date ※ 22 June 2017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPE40

Designing the Flash II Photon Diagnostic Beamline and Components

ion, vacuum, experiment, photon

96

D. Meissner, M. Brachmanski, M. Hesse, U. Jastrow, M. Kuhlmann, H. Mahn, F. Marutzky, E. Plönjes-Palm, M. Röhling, H. Schulte-Schrepping, K.I. Tiedtke, R. Treusch
DESY, Hamburg, Germany

From 2013 to 2016 the free electron laser FLASH at DESY in Hamburg, Germany was upgraded with a second undulator line, photon diagnostic line, beam distribution and experimental hall connected to the same linear accelerator. This paper shows the layout of the photon diagnostic section and an overview of the civil engineering challenges. The mechanical design of selected components, e.g. vacuum components, diagnostic equipment and safety related components is presented.

Poster MOPE40 [1.081 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-MOPE40

About •

paper received ※ 08 September 2016 paper accepted ※ 21 September 2016 issue date ※ 22 June 2017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPE36

Design, Construction and Commissioning of Two Highly Integrated Experimental Stations for Micro-Focusing Macromolecular Crystallography Beamlines at NSLS-II

ion, experiment, focusing, synchrotron

363

D.K. Bhogadi, B.A. Andi, L. Berman, M. Carlucci-Dayton, M.R. Fuchs, J. Jakoncic, T. Langdon, J. Lara, B.S. Martins, S. McSweeney, S.F. Myers, D.K. Schneider, R.M. Sweet
BNL, Upton, Long Island, New York, USA

Funding: This work is supported by the US National Institutes of Health and the US Department of Energy.
We present the final engineering design and first commissioning results of two highly integrated experimental stations for the micro-focusing (FMX) and the highly automated (AMX) MX beamlines at the NSLS-II. These beamlines will support a broad range of biomedical structure determination methods. The experimental stations are designed and fabricated in-house to meet the challenging requirements resulting from the small beam size of 1 µm and the extremely short working distance of only 190 mm from the beam exit window to the FMX focal spot. The compact beam conditioning unit contains, within 140 mm, a beam position monitor, an attenuator, primary slits, an intensity monitor, a sub-millisecond shutter, and secondary slits. The diffractometers consist of an interchangeable dual axis air bearing-based goniometers with a target sphere of confusion of 100 nm, an on-axis microscope, an x-ray fluorescence detector and dynamic beam shaping slits. The end stations are integrated in a compact space on a granite machine bed with high modularity for future upgrades and extensions. Real-time autonomous robotic systems are being implemented for high through-put cryogenic sample handling.

Poster WEPE36 [2.369 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-WEPE36

About •

paper received ※ 11 September 2016 paper accepted ※ 05 October 2016 issue date ※ 22 June 2017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)