ICALEPCS2019 - List of Keywords (instrumentation)

Paper	Title	Other Keywords	Page
MOPHA022	Implementation of ISO 50001 Energy Management System With the Advantage of Archive Viewer in NSRRC	network, controls, SCADA, factory	239
	C.S. Chen, W.S. Chan, Y.Y. Cheng, Y.F. Chiu, Y.-C. Chung, K.C. Kuo, M.T. Lee, Y.-C. Lin, C.Y. Liu, Z.-D. Tsai NSRRC, Hsinchu, Taiwan
	Due to the limited energy resources in Taiwan, energy conservation is always a big issue for everyone who lives in this country. According to the data from the related departments, nearly 98% of energy is imported from abroad for more than a decade. Despite the strong dependency on foreign fuel imports, the energy subsidy policy leads to a relatively low cost of energy for end users, while it is not reasonable. In order to resolve the energy resource shortage and pursue a more efficient energy use, the implementation of ISO 50001 energy management system is activated with the advantage of the Archive Viewer in NSRRC this year. The energy management system will build up a overall energy usage model and several energy performance indicators to help us achieve efficient energy usage.
	Poster MOPHA022 [0.842 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA022
About •	paper received ※ 30 September 2019 paper accepted ※ 10 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPHA049	Test-bench Design for New Beam Instrumentation Electronics at CERN	hardware, FPGA, electron, electronics	323
	M. Gonzalez-Berges, J.O. Robinson, M. Saccani, V. Schramm, M.A. Stachon CERN, Meyrin, Switzerland
	The Beam Instrumentation group has designed a new general-purpose VME acquisition board that will serve as the basis for the design of new instruments and will be used in the renovation of existing systems in the future. Around 1200 boards have been produced. They underwent validation, environmental stress screening and run-in tests to ensure their performance and long term reliability. This allowed to identify potential issues at an early stage and mitigate them, minimizing future interventions and downtime. A dedicated test-bench was designed to drive the tests and continuously monitor the board functionality. One board has more than 45 functions including memories, high speed serial links and a variety of diagnostics. The test-bench was fully integrated with the CERN asset management system to allow lifecycle management from the initial production phase. The data captured during these tests was stored and analyzed regularly to find sources of failures. This was the first time that such a complete test-bench has been used. This paper presents all the details of the test-bench design and implementation.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA049
About •	paper received ※ 30 September 2019 paper accepted ※ 19 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA038	Extending Tango Control System With Kepler Workflow, Presented on an X-Ray Crystallographic Application	controls, TANGO, experiment, interface	1166
	S. Brockhauser, V. Bugris, K. Csankó, Zs. Filákovics BRC, Szeged, Hungary P. Ács, V. Hanyecz ELI-ALPS, Szeged, Hungary S. Brockhauser EuXFEL, Schenefeld, Germany
	Nowadays there is a growing need for user friendly workflow editors in all fields of scientific research. A special interest group is present at big physics research facilities where instrumentation is mostly controlled by a robust, and reliable low level control software solution. Different types of specific experiments using predetermined automated protocols and on-line data processing with real-time feedback require a more flexible and abstract high level control system. Beside flexibility and dynamism, easy usability is also required for researchers collaborating from several different fields. Tentatively, to test the ease and flexible usability, the Kepler workflow-engine was integrated with Tango. It enables researchers to automate and document experiment protocols without any programming skill. The X-ray crystallography laboratory at the Biological Research Center of Hungarian Academy of Science (BRC) has implemented an example crystallographic workflow to test the integrated system. This development was performed in cooperation with ELI-ALPS. S. Brockhauser, et al., Acta Cryst., D68, pp. 975-984, 2012. **P. Ács, et al., Proceedings of ICALEPCS2015, Melbourne, Australia MOPGF050, ISBN 978-3-95450-148-9, pp 212-215
	Poster WEPHA038 [1.193 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WEPHA038
About •	paper received ※ 10 September 2019 paper accepted ※ 03 October 2020 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THCPR02	Target Control and Protection Systems Lessons from SNS Operations	target, controls, PLC, neutron	1623
	D.L. Humphreys ORNL RAD, Oak Ridge, Tennessee, USA
	Funding: Work supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under contract number DE-AC05-00OR22725. The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory has been in operations since 2006 and proposes a project to build a Second Target Station (STS) to effectively double potential scientific output. The SNS target controls operate in a harsh environment which includes high radiation, exposure to gaseous radionuclides, and activated liquid mercury and mercury vapor. These conditions necessitate protective interlocks and credited controls for protection functions to ensure proper response to off-normal conditions. In order to inform the design of target controls for the STS, we have examined lessons learned during SNS operations regarding the design and implementation of the control and protection systems for the first target station (FTS). This paper will examine various aspects of the performance of the target control and protection systems including reliability, maintainability and sustainability given the challenging environment created by 1.4 MW operations. Specific topics include distributed control of various target subsystems, response to loss of power, selection of nuclear grade instrumentation, and applying these lessons to the design for the STS project.
	Slides THCPR02 [7.233 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-THCPR02
About •	paper received ※ 01 October 2019 paper accepted ※ 09 October 2019 issue date ※ 30 August 2020
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOPHA022

Implementation of ISO 50001 Energy Management System With the Advantage of Archive Viewer in NSRRC

network, controls, SCADA, factory

239

C.S. Chen, W.S. Chan, Y.Y. Cheng, Y.F. Chiu, Y.-C. Chung, K.C. Kuo, M.T. Lee, Y.-C. Lin, C.Y. Liu, Z.-D. Tsai
NSRRC, Hsinchu, Taiwan

Due to the limited energy resources in Taiwan, energy conservation is always a big issue for everyone who lives in this country. According to the data from the related departments, nearly 98% of energy is imported from abroad for more than a decade. Despite the strong dependency on foreign fuel imports, the energy subsidy policy leads to a relatively low cost of energy for end users, while it is not reasonable. In order to resolve the energy resource shortage and pursue a more efficient energy use, the implementation of ISO 50001 energy management system is activated with the advantage of the Archive Viewer in NSRRC this year. The energy management system will build up a overall energy usage model and several energy performance indicators to help us achieve efficient energy usage.

Poster MOPHA022 [0.842 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA022

About •

paper received ※ 30 September 2019 paper accepted ※ 10 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPHA049

Test-bench Design for New Beam Instrumentation Electronics at CERN

hardware, FPGA, electron, electronics

323

M. Gonzalez-Berges, J.O. Robinson, M. Saccani, V. Schramm, M.A. Stachon
CERN, Meyrin, Switzerland

The Beam Instrumentation group has designed a new general-purpose VME acquisition board that will serve as the basis for the design of new instruments and will be used in the renovation of existing systems in the future. Around 1200 boards have been produced. They underwent validation, environmental stress screening and run-in tests to ensure their performance and long term reliability. This allowed to identify potential issues at an early stage and mitigate them, minimizing future interventions and downtime. A dedicated test-bench was designed to drive the tests and continuously monitor the board functionality. One board has more than 45 functions including memories, high speed serial links and a variety of diagnostics. The test-bench was fully integrated with the CERN asset management system to allow lifecycle management from the initial production phase. The data captured during these tests was stored and analyzed regularly to find sources of failures. This was the first time that such a complete test-bench has been used. This paper presents all the details of the test-bench design and implementation.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-MOPHA049

About •

paper received ※ 30 September 2019 paper accepted ※ 19 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPHA038

Extending Tango Control System With Kepler Workflow, Presented on an X-Ray Crystallographic Application

controls, TANGO, experiment, interface

1166

S. Brockhauser, V. Bugris, K. Csankó, Zs. Filákovics
BRC, Szeged, Hungary
P. Ács, V. Hanyecz
ELI-ALPS, Szeged, Hungary
S. Brockhauser
EuXFEL, Schenefeld, Germany

Nowadays there is a growing need for user friendly workflow editors in all fields of scientific research. A special interest group is present at big physics research facilities where instrumentation is mostly controlled by a robust, and reliable low level control software solution. Different types of specific experiments using predetermined automated protocols and on-line data processing with real-time feedback require a more flexible and abstract high level control system*. Beside flexibility and dynamism, easy usability is also required for researchers collaborating from several different fields. Tentatively, to test the ease and flexible usability, the Kepler workflow-engine was integrated with Tango**. It enables researchers to automate and document experiment protocols without any programming skill. The X-ray crystallography laboratory at the Biological Research Center of Hungarian Academy of Science (BRC) has implemented an example crystallographic workflow to test the integrated system. This development was performed in cooperation with ELI-ALPS.
*S. Brockhauser, et al., Acta Cryst., D68, pp. 975-984, 2012.
**P. Ács, et al., Proceedings of ICALEPCS2015, Melbourne, Australia MOPGF050, ISBN 978-3-95450-148-9, pp 212-215

Poster WEPHA038 [1.193 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-WEPHA038

About •

paper received ※ 10 September 2019 paper accepted ※ 03 October 2020 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THCPR02

Target Control and Protection Systems Lessons from SNS Operations

target, controls, PLC, neutron

1623

D.L. Humphreys
ORNL RAD, Oak Ridge, Tennessee, USA

Funding: Work supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under contract number DE-AC05-00OR22725.
The Spallation Neutron Source (SNS) at Oak Ridge National Laboratory has been in operations since 2006 and proposes a project to build a Second Target Station (STS) to effectively double potential scientific output. The SNS target controls operate in a harsh environment which includes high radiation, exposure to gaseous radionuclides, and activated liquid mercury and mercury vapor. These conditions necessitate protective interlocks and credited controls for protection functions to ensure proper response to off-normal conditions. In order to inform the design of target controls for the STS, we have examined lessons learned during SNS operations regarding the design and implementation of the control and protection systems for the first target station (FTS). This paper will examine various aspects of the performance of the target control and protection systems including reliability, maintainability and sustainability given the challenging environment created by 1.4 MW operations. Specific topics include distributed control of various target subsystems, response to loss of power, selection of nuclear grade instrumentation, and applying these lessons to the design for the STS project.

Slides THCPR02 [7.233 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-ICALEPCS2019-THCPR02

About •

paper received ※ 01 October 2019 paper accepted ※ 09 October 2019 issue date ※ 30 August 2020

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)