Paper | Title | Other Keywords | Page | ||
---|---|---|---|---|---|
MOPLS077 | The 2mrad Crossing Angle Interaction Region and Extraction Line | extraction, optics, quadrupole, interaction-region | 730 | ||
|
A complete optics design for the 2mrad crossing angle interaction region and extraction line was presented at Snowmass 2005. Since this time, the design task force has been working on developing and improving the performance of the extraction line. The work has focused on optimising the final doublet parameters and on reducing the power losses resulting from the disrupted beam transport. In this paper, the most recent status of the 2mrad layout and the corresponding performance are presented.
|
|
|
||
MOPLS078 | Benchmarking of Tracking Codes (BDSIM/DIMAD) using the ILC Extraction Lines | extraction, quadrupole, optics, SLAC | 733 | ||
|
The study of beam transport is of central importance to the design and performance assessment of modern particle accelerators. In this work, we benchmark two contemporary codes - DIMAD and BDSIM, the latter being a relatively new tracking code and built within the framework of GEANT4. We consider both the 20mrad and 2mrad extraction lines of the International Linear Collider and perform disrupted beam tracking studies of heavily disrupted post-collision electron beams. We find that the two codes in most cases give an equivalent description of the beam transport.
|
|
|
||
TUPLS117 | Beam Transport Lines for the CSNS | target, linac, RTBT, beam-losses | 1780 | ||
|
This paper presents the design of two beam transport lines at the CSNS: one is the injection line from the linac to the RCS and the other is the target line from the RCS to the target station. In the injection beam line, space charge effects, transverse halo collimation, momentum tail collimation and debunching are the main concerned topics. A new method of using triplet cells and stripping foils is used to collimate transverse halo. A long straight section is reserved for the future upgrading linac and debuncher. In the target beam line, large halo emittance, beam stability at the target due to kicker failures and beam jitters, shielding of back-scattering neutrons from the target are main concerned topics. Special bi-gap magnets will be used to reduce beam losses in the collimators in front of the target.
|
|
|
||
WEPCH148 | Computing TRANSPORT/TURTLE Transfer Matrices from MARYLIE/MAD Lie Maps | optics, accelerator-theory, CERN, LEFT | 2272 | ||
|
Modern optics codes often utilize a Lie algebraic formulation of single particle dynamics. Lie algebra codes such as MARYLIE and MAD offer a number of advantages that makes them particularly suitable for certain applications, such as the study of higher order optics and for particle tracking. Many of the older more traditional optics codes use a matrix formulation of the equations of motion. Matrix codes such as TRANSPORT and TURTLE continue to find useful applications in many areas where the power of the Lie algebra approach is not necessary. Arguably the majority of practical optics applications can be addressed successfully with either Lie algebra or matrix codes, but it is often a tedious exercise to compare results from the two types of codes in any detail. Differences in the choice of dynamic variables, between Lie algebra and matrix codes, compounds the comparison difficulties already inherent in the different formulations of the equations of motion. This paper summarizes key relationships and methods that permit that direct numerical comparison of results from MARYLIE and MAD with those from TRANSPORT and TURTLE.
|
|
|
||
WEPCH149 | PBO LAB (tm) Tools for Comparing MARYLIE/MAD Lie Maps and TRANSPORT/TURTLE Transfer Matrices | optics, quadrupole, controls, simulation | 2275 | ||
|
Particle optics codes frequently utilize either a Lie algebraic formulation or a matrix formulation of the equations of motion. Examples of codes utilizing the Lie algebra approach include MARYLIE and MAD, whereas TRANSPORT and TURTLE use the matrix formulation. Both types of codes have common application to many particle optics problems. However, it is often a very tedious exercise to compare results from the two types of codes in any great detail. As described in a companion paper in these proceedings, differences in the choice of phase space variables, as well as the inherent differences between the Lie algebraic and matrix formulations, make for unwieldy and complex relations between results from the two types of codes. Computational capabilities have been added to the PBO Lab software that automates the calculation of transfer matrices from Lie maps, and that converts phase space distributions between the different representations used by the codes considered here. Graphical and quantitative comparison tools have been developed for quick and easy visual comparisons of transfer maps and matrices.
|
|
|
||
WEPCH159 | Accelerator Systems for Particle Therapy | synchrotron, ion, proton, GSI | 2302 | ||
|
Danfysik and Siemens have entered a cooperation to market and build Particle Therapy* systems for cancer therapy. The systems are based on the experience from GSI together with a novel design of a synchrotron and Siemens experience in oncology. The accelerator systems will include an injector system (7 MeV/u proton and light ions), a synchrotron and a choice of fixed-angle horizontal and semi-vertical beamlines together with gantry systems. The slowly extracted beam will cover the energy ranges of 48-250 MeV for protons and 88-430 MeV/u for carbon ions. The extraction time will be up to 10s with intensities well beyond the needs of scanning beam applications. We will describe the layout of such a system and present details on some of the subsystems.
|
*Particle Therapy is a work in progress and requires country-specific regulatory approval prior to clinical use. |
|
||
THPCH126 | System Development of a Time-of-flight Spectrometer for Surface Analysis of Materials | target, quadrupole, ion, simulation | 3095 | ||
|
To study on design the time-of-flight Rutherford backscattering spectrometry (TOF-RBS) technique for nano-material surface analysis with high resolution. At Fast Neutron Research Facility, FNRF, upgrading of the existing pulsed-beam accelerator from 150-keV of D+$ to 280 keV of He+ was proposed to use for the most powerful method of a near-surface characterization of materials utilizing TOF-RBS. The beam transport was redesigned based on the multicusp ion source which was designed the extraction and focusing system for optimization by the computer program KOBRA, and the existing beam pulsing system to provide He+ ion beam with a few nano-second width and 280-keV acceleration energy. Simulation was done by the computer program Beam Optics, resulting in the beam size at the target position of 1 mm in diameter. The measured beam size was 6 mm in diameter. The optimization of the target position was done by the PARMELA program, to be at 3.14 m from the middle point of the buncher. Components, beam transport characteristics, beam optic simulation, and role of quadrupole magnet were explained. Design and test of the scattering chamber for TOF-RBS were shown and measured by the MCP detector. The quadrupole triplet was designed and constructed at FNRF. Development of TOF-RBS system was implemented in this study. Designing component, fabrication and installation to the accelerator system were completed. Beam extraction and He-scattering tests were done.
|
|
|