MEDSI2018 - List of Authors (Preissner, C.A.)

Paper	Title	Page
TUPH28	Calculation of Orbit Distortions for the APS Upgrade Due to Girder Resonances	95
	J. Nudell, Z. Liu, C.A. Preissner, V. Sajaev ANL, Argonne, Illinois, USA
	Maintaining sub-micron-scale beam stability for the APS-U Multibend Achromat Lattice places strict requirements on the magnet support system. Historically, magnet vibration requirements have been based on physics simulations which make broad generalizations and assumptions regarding the magnet motion. Magnet support systems have been notoriously difficult to analyze with FEA techniques and as a consequence, these analyses have been underutilized in predicting accelerator performance. The APS has developed a procedure for accurate modeling of magnet support systems. The girder mode shapes are extracted from these analyses and exported to accelerator simulation code elegant to calculate the static beam amplification factor for each mode shape. These amplification factors, along with knowledge of damping coefficients and the character of the tunnel floor motion, may then be used to predict the effect of girder resonances on beam stability and validate the magnet support designs.
	Poster TUPH28 [0.848 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-TUPH28
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPH22	Le Guide for Support: A Cookbook for Modeling of Accelerator Structures*	252
	C.A. Preissner, S.J. Izzo, Z. Liu, J. Nudell ANL, Argonne, Illinois, USA
	Funding: * Argonne National Laboratory's work was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under contract DE-AC02- 06CH11357. The Advanced Photon Source-Upgrade (APS-U) project has stringent specifications and a 12 month installation schedule. Some form of these constraints appear to be common at all multi-bend achromat upgrade projects. At the APS-U, no full tests will be made of the final accelerator support design. The evaluation of the final design against the specifications will be based primarily on computer simulations using virtual inputs. Insuring that the final designs meet specifications solely based on simulations is much like cooking a complex, multi-course meal without a trial run. Producing a successful meal on the first try requires a prior understanding of the ingre-dients, techniques, and interactions between the constituents. A good cookbook can be essential in providing this under-standing. Likewise, producing an accelerator support final design that meets the requirements requires a prior under-standing of the materials, components, techniques, and interactions between them. This poster describes a cookbook-style approach that any design team can use to confidently predict important characteristics such as natural frequency and ambient vibration response with an error of around 10%.
	Poster WEPH22 [0.541 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-WEPH22
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Calculation of Orbit Distortions for the APS Upgrade Due to Girder Resonances

95

J. Nudell, Z. Liu, C.A. Preissner, V. Sajaev
ANL, Argonne, Illinois, USA

Maintaining sub-micron-scale beam stability for the APS-U Multibend Achromat Lattice places strict requirements on the magnet support system. Historically, magnet vibration requirements have been based on physics simulations which make broad generalizations and assumptions regarding the magnet motion. Magnet support systems have been notoriously difficult to analyze with FEA techniques and as a consequence, these analyses have been underutilized in predicting accelerator performance. The APS has developed a procedure for accurate modeling of magnet support systems. The girder mode shapes are extracted from these analyses and exported to accelerator simulation code elegant to calculate the static beam amplification factor for each mode shape. These amplification factors, along with knowledge of damping coefficients and the character of the tunnel floor motion, may then be used to predict the effect of girder resonances on beam stability and validate the magnet support designs.

Poster TUPH28 [0.848 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-TUPH28

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPH22

Le Guide for Support: A Cookbook for Modeling of Accelerator Structures*

252

C.A. Preissner, S.J. Izzo, Z. Liu, J. Nudell
ANL, Argonne, Illinois, USA

Funding: * Argonne National Laboratory's work was supported by the U.S. Department of Energy, Office of Science, Office of Basic Energy Sciences, under contract DE-AC02- 06CH11357.
The Advanced Photon Source-Upgrade (APS-U) project has stringent specifications and a 12 month installation schedule. Some form of these constraints appear to be common at all multi-bend achromat upgrade projects. At the APS-U, no full tests will be made of the final accelerator support design. The evaluation of the final design against the specifications will be based primarily on computer simulations using virtual inputs. Insuring that the final designs meet specifications solely based on simulations is much like cooking a complex, multi-course meal without a trial run. Producing a successful meal on the first try requires a prior understanding of the ingre-dients, techniques, and interactions between the constituents. A good cookbook can be essential in providing this under-standing. Likewise, producing an accelerator support final design that meets the requirements requires a prior under-standing of the materials, components, techniques, and interactions between them. This poster describes a cookbook-style approach that any design team can use to confidently predict important characteristics such as natural frequency and ambient vibration response with an error of around 10%.

Poster WEPH22 [0.541 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-WEPH22

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)