IPAC2016 - List of Authors (Kazama, S.)

Paper	Title	Page
TUOBA01	Beam Commissioning of SuperKEKB	1019
	Y. Funakoshi, T. Abe, T. Adachi, K. Akai, Y. Arimoto, K. Egawa, Y. Enomoto, J.W. Flanagan, H. Fukuma, K. Furukawa, N. Iida, H. Iinuma, H. Ikeda, T. Ishibashi, M. Iwasaki, T. Kageyama, H. Kaji, T. Kamitani, T. Kawamoto, S. Kazama, M. Kikuchi, T. Kobayashi, K. Kodama, H. Koiso, M. Masuzawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, S. Nakamura, T.T. Nakamura, H. Nakayama, T. Natsui, M. Nishiwaki, K. Ohmi, Y. Ohnishi, T. Oki, S. Sasaki, M. Satoh, Y. Seimiya, K. Shibata, M. Suetake, Y. Suetsugu, H. Sugimoto, M. Tanaka, M. Tawada, S. Terui, M. Tobiyama, S. Uehara, S. Uno, X. Wang, K. Watanabe, Y. Yano, S.I. Yoshimoto, R. Zhang, D. Zhou, X. Zhou, Z.G. Zong KEK, Ibaraki, Japan D. El Khechen LAL, Orsay, France
	In this report, we describe the machine operation in the first 3 months of the Phase 1 commissioning of SuperKEKB. The beam commissioning is smoothly going on. Vacuum scrubbing, the optics corrections and others are described.
	Slides TUOBA01 [9.346 MB]
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOR019	Development of CVD Diamond Detector for Beam Conditioning Monitor at the SuperKEKB Linac	2707
	S. Kazama, T. Kamitani KEK, Ibaraki, Japan P. Bambade, V. Kubytskyi LAL, Orsay, France
	Positron beams in SuperKEKB will be produced from electromagnetic showers originating from the interaction between primary electron beams and a tungsten target. Since the emittance of primary beams is very small, the target is easy to be destroyed if focused beams are irradiated. In the SuperKEKB LINAC, a plate called spoiler is placed in the upstream of the target to enlarge the beam spot size. If the beam control is in a correct way, radioactive rays will be observed near both the spoiler and the target. However, if the beam control is not successful and primary beams are irradiated directly on the target, significant radiations are observed only near the target. If such a behavior is observed, primary beams must be stopped to protect the target. Since the number of electrons in a bunch is quite large(~10nC), the radiation dose is expected to be very high. Therefore, the radiation detector is required to have a high radiation-tolerance over a long period of time. Diamond has a high radiation tolerance due to its strong covalent bond, and we are now developing radiation detectors using diamond crystals. In this talk, current status including beam test measurements will be shown.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOY027	Commissioning Status of SuperKEKB Injector Linac	4152
	M. Satoh, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, Y. Enomoto, S. Fukuda, Y. Funakoshi, K. Furukawa, T. Higo, H. Honma, N. Iida, M. Ikeda, H. Iwase, H. Kaji, K. Kakihara, T. Kamitani, H. Katagiri, S. Kazama, M. Kikuchi, H. Koiso, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, Y. Ohnishi, S. Ohsawa, F. Qiu, I. Satake, D. Satoh, Y. Seimiya, T. Shidara, A. Shirakawa, M. Suetake, H. Sugimoto, T. Suwada, M. Tanaka, M. Tawada, Y. Yano, K. Yokoyama, M. Yoshida, R. Zhang, X. Zhou KEK, Ibaraki, Japan
	The SuperKEKB main ring is currently being constructed for aiming at the peak luminosity of 8 x 10³⁵ cm^-2s⁻¹. The electron/positron injector linac upgrade is also going on for increasing the intensity of bunch charge with keeping the small emittance. The key upgrade issues are the construction of positron damping ring, a new positron capture system, and a low emittance photo-cathode rf electron source. The injector linac beam commissioning started in the October of 2013. In this paper, we report the present status and future plan of SuperKEKB injector commissioning.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Commissioning of SuperKEKB

1019

Y. Funakoshi, T. Abe, T. Adachi, K. Akai, Y. Arimoto, K. Egawa, Y. Enomoto, J.W. Flanagan, H. Fukuma, K. Furukawa, N. Iida, H. Iinuma, H. Ikeda, T. Ishibashi, M. Iwasaki, T. Kageyama, H. Kaji, T. Kamitani, T. Kawamoto, S. Kazama, M. Kikuchi, T. Kobayashi, K. Kodama, H. Koiso, M. Masuzawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, S. Nakamura, T.T. Nakamura, H. Nakayama, T. Natsui, M. Nishiwaki, K. Ohmi, Y. Ohnishi, T. Oki, S. Sasaki, M. Satoh, Y. Seimiya, K. Shibata, M. Suetake, Y. Suetsugu, H. Sugimoto, M. Tanaka, M. Tawada, S. Terui, M. Tobiyama, S. Uehara, S. Uno, X. Wang, K. Watanabe, Y. Yano, S.I. Yoshimoto, R. Zhang, D. Zhou, X. Zhou, Z.G. Zong
KEK, Ibaraki, Japan
D. El Khechen
LAL, Orsay, France

In this report, we describe the machine operation in the first 3 months of the Phase 1 commissioning of SuperKEKB. The beam commissioning is smoothly going on. Vacuum scrubbing, the optics corrections and others are described.

Slides TUOBA01 [9.346 MB]

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPOR019

Development of CVD Diamond Detector for Beam Conditioning Monitor at the SuperKEKB Linac

2707

S. Kazama, T. Kamitani
KEK, Ibaraki, Japan
P. Bambade, V. Kubytskyi
LAL, Orsay, France

Positron beams in SuperKEKB will be produced from electromagnetic showers originating from the interaction between primary electron beams and a tungsten target. Since the emittance of primary beams is very small, the target is easy to be destroyed if focused beams are irradiated. In the SuperKEKB LINAC, a plate called spoiler is placed in the upstream of the target to enlarge the beam spot size. If the beam control is in a correct way, radioactive rays will be observed near both the spoiler and the target. However, if the beam control is not successful and primary beams are irradiated directly on the target, significant radiations are observed only near the target. If such a behavior is observed, primary beams must be stopped to protect the target. Since the number of electrons in a bunch is quite large(~10nC), the radiation dose is expected to be very high. Therefore, the radiation detector is required to have a high radiation-tolerance over a long period of time. Diamond has a high radiation tolerance due to its strong covalent bond, and we are now developing radiation detectors using diamond crystals. In this talk, current status including beam test measurements will be shown.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOY027

Commissioning Status of SuperKEKB Injector Linac

4152

M. Satoh, M. Akemoto, D.A. Arakawa, Y. Arakida, A. Enomoto, Y. Enomoto, S. Fukuda, Y. Funakoshi, K. Furukawa, T. Higo, H. Honma, N. Iida, M. Ikeda, H. Iwase, H. Kaji, K. Kakihara, T. Kamitani, H. Katagiri, S. Kazama, M. Kikuchi, H. Koiso, S. Matsumoto, T. Matsumoto, H. Matsushita, S. Michizono, K. Mikawa, T. Mimashi, T. Miura, F. Miyahara, T. Mori, A. Morita, H. Nakajima, K. Nakao, T. Natsui, Y. Ogawa, Y. Ohnishi, S. Ohsawa, F. Qiu, I. Satake, D. Satoh, Y. Seimiya, T. Shidara, A. Shirakawa, M. Suetake, H. Sugimoto, T. Suwada, M. Tanaka, M. Tawada, Y. Yano, K. Yokoyama, M. Yoshida, R. Zhang, X. Zhou
KEK, Ibaraki, Japan

The SuperKEKB main ring is currently being constructed for aiming at the peak luminosity of 8 x 10³⁵ cm^-2s⁻¹. The electron/positron injector linac upgrade is also going on for increasing the intensity of bunch charge with keeping the small emittance. The key upgrade issues are the construction of positron damping ring, a new positron capture system, and a low emittance photo-cathode rf electron source. The injector linac beam commissioning started in the October of 2013. In this paper, we report the present status and future plan of SuperKEKB injector commissioning.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)