Paper | Title | Page |
---|---|---|
THIOD01 | SRF Cavities for ADS Project in China | 868 |
|
||
The driver linac for ADS project in China is full superconducting downstream of Radio Frequecy Quadrupole Accelerator. It is a key technology R&D stage of the project from 2011 to 2015. Superconducting HWR, Spoke, and elliptical cavities are all involved in the project. The prototypes of 162.5 MHz HWR010, 325 MHz Spoke012, 325 MHz Spoke021, 325 MHz Spoke040, and 650 MHz elliptical 063 are being developed at IMP and IHEP in China. A small number of HWR010 and Spoke012 have been produced and vertically tested. The first prototype of Spoke021 were tested too. The design, performances, fabrication, suface processing, and testing of all cavities will be presented in the talk. The design improvement of the cavities in the future will also be discussed. | ||
![]() |
Slides THIOD01 [13.465 MB] | |
THP016 | DEVELOPMENT OF THE SUPERCONDUCTING HALF WAVE RESONATOR FOR INJECTOR II IN C-ADS | 923 |
|
||
The Development of the Half Wave Resonator (HWR010) is based on the China ADS. The HWR010 operates at 162.5 MHz and can provide more than 0.78 MV of accelerating voltage per cavity for proton withβopt=0.10. We have designed the HWR010 in 2011. A copper model has been fabricated to test the HWR fabrication procedure. Five HWR010s have been fabricated in 2012. The HWR010s has finished the vertical testing and the Q0 is 4·108 at Epeak = 45 MeV/m, and one of the HWR010s has been vertical tested with helium vessel. The slow tuner and high power coupler for this HWR have been developed and tested. | ||
THP021 | Design of the SSR021 Cavity for the Proton Accelerator Main Linac of China ADS | 939 |
|
||
China ADS is a high intensity proton machine based on CW superconducting technology. It includes two injectors and one main linac. The Institute of High Energy Physics (IHEP) and the Institute of Modern Physics (IMP) of the Chinese Academy of Sciences (CAS), are responsible for developing the main linac together. This paper introduces the physics and mechanical design of the single spoke resonator (SSR021, beta021 cavity), which is used for first section of the main linac. | ||
THP081 | Development of a Slow Tuner for the 162.5 MHz Superconducting Half-Wave Resonator in IMP | 1115 |
|
||
Funding: This work is supported by Strategic Priority Research Program of CAS (XDA0302)and National Natural Science Foundation of China (91026004) Within the framework of the C-ADS project, IMP has proposed a 162.5MHz HWR Superconducting cavity for low energy section(β=0.09) of high power proton linear accelerators. A compact slow tuner has been developed for final tuning of the resonance frequency of the cavity after cooling down to operating temperature and to compensate microphonics and Lorentz force detuning. The slow tuner is driven by an external stepper motor and gear box for coarse cavity adjustment. To reduce the force requirements of the actuator, a lever arm and scissor jack mechanism have been applied. The tuner design and recent results of warm tests as the first prototype are presented. |
||