DESY, Hamburg
Radio frequency measurements on parts and subassemblies of superconducting cavities during its fabrication are a proper method of quality management and quality assurance. During the fabrication of 1.3 GHz cavities for FLASH, a simple device was used for measuring the half cells, dumb bells and endgroups. Because of the long test duration the device is not applicable for massproduction of 800 cavities. A semiautomated RF measurement machine was designed and built. This machine performs an easy load of the parts, consistent RF contacts, automated RF measurements and documentation. We describe the functionality of the RF-measurement machine and performance of the prototype during fabrication of 40 cavities for FLASH.
DESY, Hamburg
Fermilab, Batavia
A semi-automatic cavity tuning machine is used at DESY since 15 years to tune the field flatness and concentricity of the TESLA shape 9 cell cavities for FLASH. Based on this experience a further development work was done in a collaboration effort among FNAL, DESY and KEK to support the high throughput cavity fabrication necessary for the European XFEL and other SRF based future projects. Two of the four machines will be delivered to and operated by the cavity vendors for the tuning of the XFEL cavities. We describe the mechanical design and functionality of these machines and discuss the safety aspects for the operation at the industry.