ICALEPCS2013 - List of Authors (Berthe, C.)

Paper

Title

Page

Machine Protection System for the SPIRAL2 Facility

178

C. Berthe, E. Lécorché, M.H. Moscatello, G. Normand
GANIL, Caen, France

The phase 1 of the SPIRAL2 facility, the extension project of the GANIL laboratory, is under construction in Caen, France. The accelerator is based on a linear solution, mainly composed of a normal conducting RFQ and a superconducting linac. One of its specificities is to be designed to accelerate high power deuteron and heavy ion beams from 40 to 200kW, and medium intensity heavy ion beams as well to a few kW. A Machine Protection System, has been studied to control and protect the accelerator from thermal damages for a very large range of beam intensities and powers. This paper presents the technical solutions chosen for this system which is based on two technical subsystems: one dedicated to thermal protection which requires a first PLC associated with a fast electronic system and a second dedicated to enlarged protection which is based on a safety products.

Poster MOPPC042 [2.220 MB]

TUCOBAB01

A Small but Efficient Collaboration for the Spiral2 Control System Development

498

E. Lécorché, C. Berthe, F. Bucaille, P. Gillette, C.H. Haquin, E. Lemaître, J.M. Loyant, G. Normand, C.H. Patard, L. Philippe, R.J.F. Roze, D.T. Touchard, A.H. Trudel
GANIL, Caen, France
J.F. Denis, F. Gougnaud, J.-F. Gournay, Y. Lussignol, A. Roger, R. Touzery
CEA/DSM/IRFU, France
P.G. Graehling, J.H. Hosselet, C. Maazouzi
IPHC, Strasbourg Cedex 2, France

The Spiral2 radioactive ion beam facility to be commissioned in 2014 at Ganil (Caen) is built within international collaborations. This also concerns the control system development shared by three laboratories: Ganil has to coordinate the control and automated systems work packages, CEA/IRFU is in charge of the “injector” (sources and low energy beam lines) and the LLRF, CNRS/IPHC provides the emittancemeters and a beam diagnostics platform. Besides the technology Epics based, this collaboration, although being handled with a few people, nevertheless requires an appropriate and tight organization to reach the objectives given by the project. This contribution describes how, started in 2006, the collaboration for controls has been managed both from the technological point of view and the organizational one, taking into account not only the previous experience, technical background or skill of each partner, but also their existing working practices and “cultural” approaches. A first feedback comes from successful beam tests carried out at Saclay and Grenoble; a next challenge is the migration to operation, Ganil having to run Spiral2 as the other members are moving to new projects

Slides TUCOBAB01 [2.747 MB]

Paper	Title	Page
MOPPC042	Machine Protection System for the SPIRAL2 Facility	178
	C. Berthe, E. Lécorché, M.H. Moscatello, G. Normand GANIL, Caen, France
	The phase 1 of the SPIRAL2 facility, the extension project of the GANIL laboratory, is under construction in Caen, France. The accelerator is based on a linear solution, mainly composed of a normal conducting RFQ and a superconducting linac. One of its specificities is to be designed to accelerate high power deuteron and heavy ion beams from 40 to 200kW, and medium intensity heavy ion beams as well to a few kW. A Machine Protection System, has been studied to control and protect the accelerator from thermal damages for a very large range of beam intensities and powers. This paper presents the technical solutions chosen for this system which is based on two technical subsystems: one dedicated to thermal protection which requires a first PLC associated with a fast electronic system and a second dedicated to enlarged protection which is based on a safety products.
	Poster MOPPC042 [2.220 MB]

TUCOBAB01	A Small but Efficient Collaboration for the Spiral2 Control System Development	498
	E. Lécorché, C. Berthe, F. Bucaille, P. Gillette, C.H. Haquin, E. Lemaître, J.M. Loyant, G. Normand, C.H. Patard, L. Philippe, R.J.F. Roze, D.T. Touchard, A.H. Trudel GANIL, Caen, France J.F. Denis, F. Gougnaud, J.-F. Gournay, Y. Lussignol, A. Roger, R. Touzery CEA/DSM/IRFU, France P.G. Graehling, J.H. Hosselet, C. Maazouzi IPHC, Strasbourg Cedex 2, France
	The Spiral2 radioactive ion beam facility to be commissioned in 2014 at Ganil (Caen) is built within international collaborations. This also concerns the control system development shared by three laboratories: Ganil has to coordinate the control and automated systems work packages, CEA/IRFU is in charge of the “injector” (sources and low energy beam lines) and the LLRF, CNRS/IPHC provides the emittancemeters and a beam diagnostics platform. Besides the technology Epics based, this collaboration, although being handled with a few people, nevertheless requires an appropriate and tight organization to reach the objectives given by the project. This contribution describes how, started in 2006, the collaboration for controls has been managed both from the technological point of view and the organizational one, taking into account not only the previous experience, technical background or skill of each partner, but also their existing working practices and “cultural” approaches. A first feedback comes from successful beam tests carried out at Saclay and Grenoble; a next challenge is the migration to operation, Ganil having to run Spiral2 as the other members are moving to new projects
	Slides TUCOBAB01 [2.747 MB]