| Paper | Title | Page |
|---|
| TUP72 | Piezo-Assisted Blade Tuner: Cold Test Results | 318 |
| | - C. Pagani, A. Bosotti, N. Panzeri, R. Paparella, P. Pierini
INFN Milano - C. Albrecht, R. Lange, L. Lilje
DESY Hamburg
| |
| | The new simplified version of the piezo-assisted Blade
Tuner has been tested at DESY in the horizontal cryostat
CHECHIA in September. The tuner mechanism has been
characterized at room temperature and one high gradient
cavity of the last production has been recently tuned and
equipped with a properly modified helium tank. In view
of its possible adoption for the ILC, the cheaper stainless
steel version of the tuner has been chosen for the cold
tests. In this paper the results are presented and discussed. | |
| WEP66 | High pressure rinsing system studies | 664 |
| | - D. Sertore, M. Fusetti, P. Michelato, C. Pagani
INFN Milano-LASA - T. Higo, J. Hong, K. Saito
KEK - G. Ciovati, T. Rothgeb
JLab - A. Matheisen, N. Krupka
DESY
| |
| | High pressure rinsing (HPR) is a key process for the
surface preparation of high field superconducting cavities.
HPR water jets used in different laboratories have been
characterized measuring the transferred momentum
between the water jet and a target connected to a load cell.
The information taken during these measurements,
combined with HPR process parameters, allow
calculating new significant measurable variables such as
the jet power, the deposited energy on the cavity surfaces
and the pressure. | |