RuPAC2021 - List of Keywords (power-supply)

Paper	Title	Other Keywords	Page
MOB01	Status of U-70	proton, extraction, flattop, neutron	20
	V.A. Kalinin, A.G. Afonin, Y.M. Antipov, N.A. Ignashin, S.V. Ivanov, V.G. Lapygin, O.P. Lebedev, A. Maksimov, Yu.V. Milichenko, A.P. Soldatov, S.A. Strekalovskikh, S.E. Sytov, N.E. Tyurin, D.A. Vasiliev, A.M. Zaitsev IHEP, Moscow Region, Russia
	The report overviews present status of the Accelerator Complex U-70 at IHEP of NRC "Kurchatov Institute" (Protvino). The emphasis is put on the recent activity and upgrades implemented since the previous conference RuPAC-2018, in a run-by-run chronological ordering.
	Slides MOB01 [9.373 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOB01
About •	Received ※ 07 October 2021 — Revised ※ 08 October 2021 — Accepted ※ 09 October 2021 — Issued ※ 14 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA01	Beam Transfer Systems of NICA Facility: from HILAC to Booster	booster, injection, septum, beam-transport	61
	A. Tuzikov, A.M. Bazanov, A.V. Butenko, D.E. Donets, A.A. Fateev, A.R. Galimov, B.V. Golovenskiy, E.V. Gorbachev, A. Govorov, S.Yu. Kolesnikov, K.A. Levterov, D.A. Lyuosev, I.N. Meshkov, H.P. Nazlev, D.O. Ponkin, V.V. Seleznev, V.S. Shvetsov, A.O. Sidorin, A.I. Sidorov, A.N. Svidetelev, E. Syresin, V.I. Tyulkin JINR, Dubna, Moscow Region, Russia A.P. Kozlov, A.S. Petukhov, G.S. Sedykh JINR/VBLHEP, Moscow, Russia A.O. Sidorin Saint Petersburg State University, Saint Petersburg, Russia
	New accelerator complex is being constructed by Joint Institute for Nuclear Research (Dubna, Russia) in frame of Nuclotron-based Ion Collider fAcility (NICA) project. The NICA layout includes new Booster and existing Nuclotron synchrotrons as parts of the heavy ion injection chain of the NICA Collider as well as beam transport lines which are the important link for the whole accelerator facility. Designs and current status of beam transfer systems in the beginning part of the NICA complex, which are partially commissioned, are presented in this paper.
	Slides WEA01 [26.886 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-WEA01
About •	Received ※ 07 October 2021 — Revised ※ 08 October 2021 — Accepted ※ 13 October 2021 — Issued ※ 22 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPSC21	Light Ion Accelerator Magnets	quadrupole, dipole, simulation, operation	390
	I.A. Yurin, M.S. Dmitriyev, E.N. Indiushnii, S.M. Polozov MEPhI, Moscow, Russia
	At the moment, the National Research Nuclear University (MEPhI) is developing an injector for an accelerator of light ions with an energy of 7.5 MeV / nucleon. The injector uses several tens of quadrupole magnets with a magnetic field gradient of 6-18 T / m and several units of dipole magnets. Key requirements for quadrupole magnets include large aperture, compact transverse dimensions, uniform shape and design, ease of fabrication from a manufacturing standpoint, field accuracy within 0.1%, and low power consumption. This article will describe the requirements, simulation results, and preliminary designs for quadrupole and dipole magnets.
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-WEPSC21
About •	Received ※ 21 September 2021 — Revised ※ 30 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 15 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRB02	Accelerators of ELV Series: Current Status and Further Development	electron, extraction, operation, status	111
	D.S. Vorobev, E.V. Domarov, S. Fadeev, M. Golkovsky, Yu.I. Golubenko, D.A. Kogut, A.I. Korchagin, N.K. Kuksanov, A. Lavrukhin, P.I. Nemytov, R.A. Salimov, A.V. Semenov BINP SB RAS, Novosibirsk, Russia
	For many years Budker Institute of Nuclear Physics produces medium-energy industrial electron beam accelerators. Flexible (due to the possibility of completing with different systems) and reliable accelerators cover the energy range from 0.3 to 3 MeV, and up to 130 mA of beam current, with power up to 100 kW. High electrical efficiency allows the use of accelerators in almost all areas of radiation technology, from cross-linking of the insulation, heat shrinkable tubes and films to the production of foamed polyethylene and modification of rubber blanks for tires. All models have a unified design with a difference in overall dimensions, the length of the accelerating tube, the number of high-voltage rectifier sections, and the type of extraction device. This makes it easy to adapt the accelerators to the requirements of the technology line. ELV accelerator with an energy range of 0.3-0.5 MeV, beam current up to 130 mA, and power up to 100 kW was successfully designed, tested, and installed on the customer’s site. The accelerator is compact in overall dimensions and installed in the local steel shielding. The electron beam is extracted through a two-windows extraction system with one titanium foil 180 mm wide. New accelerators of the ELV type are also being developed. Namely ELV-15 with energy range up to 3.0 MeV and power up to 100 kW. At present time accelerator was assembled and under testing in Novosibirsk.
	Slides FRB02 [5.380 MB]
DOI •	reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-FRB02
About •	Received ※ 26 September 2021 — Accepted ※ 27 September 2021 — Issued ※ 11 October 2021
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

MOB01

Status of U-70

proton, extraction, flattop, neutron

20

V.A. Kalinin, A.G. Afonin, Y.M. Antipov, N.A. Ignashin, S.V. Ivanov, V.G. Lapygin, O.P. Lebedev, A. Maksimov, Yu.V. Milichenko, A.P. Soldatov, S.A. Strekalovskikh, S.E. Sytov, N.E. Tyurin, D.A. Vasiliev, A.M. Zaitsev
IHEP, Moscow Region, Russia

The report overviews present status of the Accelerator Complex U-70 at IHEP of NRC "Kurchatov Institute" (Protvino). The emphasis is put on the recent activity and upgrades implemented since the previous conference RuPAC-2018, in a run-by-run chronological ordering.

Slides MOB01 [9.373 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-MOB01

About •

Received ※ 07 October 2021 — Revised ※ 08 October 2021 — Accepted ※ 09 October 2021 — Issued ※ 14 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEA01

Beam Transfer Systems of NICA Facility: from HILAC to Booster

booster, injection, septum, beam-transport

61

A. Tuzikov, A.M. Bazanov, A.V. Butenko, D.E. Donets, A.A. Fateev, A.R. Galimov, B.V. Golovenskiy, E.V. Gorbachev, A. Govorov, S.Yu. Kolesnikov, K.A. Levterov, D.A. Lyuosev, I.N. Meshkov, H.P. Nazlev, D.O. Ponkin, V.V. Seleznev, V.S. Shvetsov, A.O. Sidorin, A.I. Sidorov, A.N. Svidetelev, E. Syresin, V.I. Tyulkin
JINR, Dubna, Moscow Region, Russia
A.P. Kozlov, A.S. Petukhov, G.S. Sedykh
JINR/VBLHEP, Moscow, Russia
A.O. Sidorin
Saint Petersburg State University, Saint Petersburg, Russia

New accelerator complex is being constructed by Joint Institute for Nuclear Research (Dubna, Russia) in frame of Nuclotron-based Ion Collider fAcility (NICA) project. The NICA layout includes new Booster and existing Nuclotron synchrotrons as parts of the heavy ion injection chain of the NICA Collider as well as beam transport lines which are the important link for the whole accelerator facility. Designs and current status of beam transfer systems in the beginning part of the NICA complex, which are partially commissioned, are presented in this paper.

Slides WEA01 [26.886 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-WEA01

About •

Received ※ 07 October 2021 — Revised ※ 08 October 2021 — Accepted ※ 13 October 2021 — Issued ※ 22 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPSC21

Light Ion Accelerator Magnets

quadrupole, dipole, simulation, operation

390

I.A. Yurin, M.S. Dmitriyev, E.N. Indiushnii, S.M. Polozov
MEPhI, Moscow, Russia

At the moment, the National Research Nuclear University (MEPhI) is developing an injector for an accelerator of light ions with an energy of 7.5 MeV / nucleon. The injector uses several tens of quadrupole magnets with a magnetic field gradient of 6-18 T / m and several units of dipole magnets. Key requirements for quadrupole magnets include large aperture, compact transverse dimensions, uniform shape and design, ease of fabrication from a manufacturing standpoint, field accuracy within 0.1%, and low power consumption. This article will describe the requirements, simulation results, and preliminary designs for quadrupole and dipole magnets.

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-WEPSC21

About •

Received ※ 21 September 2021 — Revised ※ 30 September 2021 — Accepted ※ 09 October 2021 — Issued ※ 15 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

FRB02

Accelerators of ELV Series: Current Status and Further Development

electron, extraction, operation, status

111

D.S. Vorobev, E.V. Domarov, S. Fadeev, M. Golkovsky, Yu.I. Golubenko, D.A. Kogut, A.I. Korchagin, N.K. Kuksanov, A. Lavrukhin, P.I. Nemytov, R.A. Salimov, A.V. Semenov
BINP SB RAS, Novosibirsk, Russia

For many years Budker Institute of Nuclear Physics produces medium-energy industrial electron beam accelerators. Flexible (due to the possibility of completing with different systems) and reliable accelerators cover the energy range from 0.3 to 3 MeV, and up to 130 mA of beam current, with power up to 100 kW. High electrical efficiency allows the use of accelerators in almost all areas of radiation technology, from cross-linking of the insulation, heat shrinkable tubes and films to the production of foamed polyethylene and modification of rubber blanks for tires. All models have a unified design with a difference in overall dimensions, the length of the accelerating tube, the number of high-voltage rectifier sections, and the type of extraction device. This makes it easy to adapt the accelerators to the requirements of the technology line. ELV accelerator with an energy range of 0.3-0.5 MeV, beam current up to 130 mA, and power up to 100 kW was successfully designed, tested, and installed on the customer’s site. The accelerator is compact in overall dimensions and installed in the local steel shielding. The electron beam is extracted through a two-windows extraction system with one titanium foil 180 mm wide. New accelerators of the ELV type are also being developed. Namely ELV-15 with energy range up to 3.0 MeV and power up to 100 kW. At present time accelerator was assembled and under testing in Novosibirsk.

Slides FRB02 [5.380 MB]

DOI •

reference for this paper ※ doi:10.18429/JACoW-RuPAC2021-FRB02

About •

Received ※ 26 September 2021 — Accepted ※ 27 September 2021 — Issued ※ 11 October 2021

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)