COMPACT AND CHEAP SYSTEMS FOR TRANSPORT PROTON AND ION BEAMS BETWEEN OF MEDICAL ACCELERATOR AND FIXATED HORIZONTALLY PATIENT AT MANY DIRECTIONS |
|
M. Katsª Alikhanov Institute for Theoretical and Experimental Physics, Moscow, Russia Abstract New versions of systems for optimal transport proton and ion beams are described: ex centric GANTRY, Planar systems (SPS(F) and NPS) and systems with super conductive magnets. Those systems can be useful at design of any new treatment facilities, especially, for transport of ions beam. ª – corresponding author |
|
DEVELOPMENT, PRODUCTION AND TESTS OF PROTOTYPE SUPERCONDUCTING CAVITIES FOR THE HIGH BETA SECTION OF THE ISAC-II HEAVY ION ACCELERATOR AT TRIUMF |
|
V. Zvyagintsevª¹, R.E. Laxdal¹, R. Dawson¹, K. Fong¹, A. Grasselino¹, P. Harmer¹, M. Marchetto¹, A.K. Mitra¹, T. Ries¹, B. Waraich¹, Q. Zheng¹, R. Edinger² ¹Canada's National Laboratory for Particle and Nuclear Physics, Vancouver, Canada ²Pavac Industries Inc., Richmond, Canada Abstract The medium beta section of the ISAC-II heavy ion superconducting linear accelerator, consisting of 20 cavities, has been in operation at TRIUMF since 2006. The high beta section of the accelerator, consisting of an additional twenty cavities, is currently under development and is scheduled for completion in 2009. The cavity is a superconducting bulk Niobium two-gap quarter-wave resonator for frequency 141 MHz, optimum β=0.11, providing, as a design goal, a voltage gain of Va=1.08 MV at 7 W power dissipation. The inner conductor is equipped with a donut drift tube. The cavity has a double wall mechanical structure with liquid Helium inside. Two prototype cavities for the ISAC-II high beta section were developed at TRIUMF and produced by a Canadian company, PAVAC Industries of Richmond, B.C. The prototypes are equipped with a mechanical dissipator to damp detuning environmental mechanical vibrations. An inductive coupler, developed at TRIUMF, provides low power dissipations to the liquid helium system. Superconducting RF tests of both cavity prototypes show that we have achieved the required frequency and exceeded the design goal parameters. Response of the cavity to liquid helium pressure fluctuations, Lorentz force detuning and microphonic sensitivity with and without the damper was tested. RF design, prototype production details and cavity test results will be presented and discussed. ª – corresponding author |
|
PROJECT OF RF SYSTEM FOR 2.2 GeV ELECTRON STORAGE RING – ZELENOGRAD SR SOURCE |
|
I.K. Sedlyarovª, V.S. Arbuzov, E.I. Gorniker, A.A. Kondakov, S.A. Krutikhin, G.Ya. Kurkin, I.V. Kuptsov, S.V. Motygin, V.N. Osipov, V.M. Petrov, A.V. Philipchenko, A.M. Pilan, A.G. Tribendis, V.A. Ushakov Budker Institute of Nuclear Physics Siberian Branch of the Russian Academy of Sciences, Novosibirsk, Russia Abstract RF system for 2.2 GeV dedicated electron storage ring – SR source being built in Zelenograd, Russia is presented. RF system operates at 181 MHz and consists of two single-cell bi-metal cavities, waveguide power distribution system, power amplifier based on two TH781 THALES tetrodes and control sub-system. Design features of the RF system units are described. Parameters of the RF system, providing operation at 2.2 GeV, 0.3 A beam current, are given. ª – corresponding author |
|