• M.A. Shapiro, J.R. Sirigiri, R.J. Temkin
  MIT/PSFC, Cambridge, Massachusetts
• G. Shvets
  The University of Texas at Austin, Austin, Texas

We present the results of research on 3D metallic lattices operating at microwave frequencies for application in (1) accelerator structures with higher order mode suppression, (2) Smith-Purcell radiation beam diagnostics, and (3) polaritonic materials for laser acceleration. Electromagnetic waves in a 3D simple cubic lattice formed by metal wires are calculated using HFSS. The bulk modes in the lattice are determined using single cell calculations with different phase advances in all three directions. The Brillouin diagram for the bulk modes is presented and indicates the absence of band gaps in simple lattices except the band below the cutoff. Lattices with thin wires as well as with thick wires have been analyzed. The Brillouin diagram also indicates the presence of low frequency 3D plasmon mode as well as the two degenerate photon modes analogous to those in a 2D lattice. Surface modes for a semi-infinite cubic lattice are modeled as a stack of cells with different phase advances in the two directions along the surface. The surface modes are found for both the thin and thick wire lattices in the band below the cutoff. They demonstrate that the lattice acts as a negative dielectric constant material.

• S. Reiche, C. Joshi, C. Pellegrini, J.B. Rosenzweig, S. Tochitsky
  UCLA, Los Angeles, California
• G. Shvets
  The University of Texas at Austin, Austin, Texas

Free-Electron Laser in the THz range can be used to generate high output power radiation or to modulate the electron beam longitudinally on the radiation wavelength scale. Microbunching on the scale of 1-5 THz is of particular importance for potential phase-locking of a modulated electron beam to a laser-driven plasma accelerating structure. However the lack of a seeding source for the FEL at this spectral range limits operation to a SASE FEL only, which denies a subpicosecond synchronization of the current modulation or radiation with an external laser source. One possibility to overcome this problem is to seed the FEL with two external laser beams, which difference (beat-wave) frequency is matched to the resonant FEL frequency in the THz range. In this presentation we study feasibility of an experiment on laser beat-wave injection in the THz FEL considered at the UCLA Neptune Laboratory, where both a high brightness photoinjector and a two-wavelength, TW-class CO2 laser system exist. By incorporating the energy modulation of the electron beam by the ponderomotive force of the beat-wave in a modified version of the time-dependent FEL code Genesis 1.3, the performance of a FEL at Neptune is simulated and analyzed.