WEB1 —  Tutorial & Oral Presentation (MC7)   (12-Oct-16   08:30—10:30)
Chair: J.R. Delayen, ODU, Norfolk, Virginia, USA
Paper Title Page
WEB1TU01
 Superconducting Accelerators Magnets  
 
  • S. Prestemon, P. Ferracin
    LBNL, Berkeley, California, USA
  
  Based on the US PAS class "Superconducting Accelerators Magnets" by Soren Prestemon / Paolo Ferracin  
slides icon Slides WEB1TU01 [84.424 MB]  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEB1CO02 Investigation of Structural Development in the Two-Step Diffusion Coating of Nb3Sn on Niobium 659
SUPO34   use link to see paper's listing under its alternate paper code  
 
  • U. Pudasaini, M.J. Kelley
    The College of William and Mary, Williamsburg, Virginia, USA
  • G.V. Eremeev, M.J. Kelley, C.E. Reece
    JLab, Newport News, Virginia, USA
  • M.J. Kelley, J. Tuggle
    Virginia Polytechnic Institute and State University, Blacksburg, USA
  
  Funding: Supported by the U.S. Department of Energy, Office of Science, Office of Nuclear Physics under contract DE-­AC05-­06OR23177 and Office of High Energy Physics under grant SC00144475.
The potential for higher operating temperatures and increased accelerating gradient has attracted SRF researchers to Nb3Sn coatings on niobium for nearly 50 years. The two-step tin vapor diffusion: nucleation followed by deposition appears to be a promising technique to prepare Nb3Sn coatings on interior cavity surface. We have undertaken a fundamental materials study of the nucleation and deposition steps. Nucleation was accomplished within parameter ranges: 300 - 500 °C, 1 - 5 hrs duration, 5 mg - 1 g SnCl2 and 1 g Sn. The resulting deposit consists of (< 10%) coverage of tin particles, as determined by SEM/EDS, while XPS and SAM discovered extra tin film between these particles. Preliminary results by EBSD show no evident effect of substrate crystallography on the crystallography of the final coating. Substantial topography was found to develop during the coating growth. 		 
slides icon Slides WEB1CO02 [3.299 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEB1CO02  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEB1CO03 Surface Impurity Content Optimization to Maximize Q-factors of Superconducting Resonators 663
SUPO28   use link to see paper's listing under its alternate paper code  
 
  • M. Martinello, M. Checchin, A. Grassellino, O.S. Melnychuk, S. Posen, A. Romanenko, D.A. Sergatskov
    Fermilab, Batavia, Illinois, USA
  • M. Checchin
    Illinois Institute of Technology, Chicago, Illlinois, USA
  • J. Zasadzinski
    IIT, Chicago, Illinois, USA
  
  Quality factor of superconducting radio-frequency (SRF) cavities is degraded whenever magnetic flux is trapped in the cavity walls during the cooldown. In this contribution we study how the trapped flux sensitivity, defined as the trapped flux surface resistance normalized for the amount of trapped flux, depends on the mean free path. A systematic study of a variety of 1.3 GHz cavities with different surface treatments (EP, 120 °C bake and different N-doping) is carried out. A bell shaped trend appears for the range of mean free path studied. Over-doped cavities fall at the maximum of this curve defining the largest values of sensitivity. In addition, we have studied the trend of the BCS surface resistance contribution as a function of mean free path, showing that N-doped cavities follow close to the theoretical minimum. Adding these results together we show that the 2/6 N-doping treatment gives the highest Q-factor values at 2 K and 16 MV/m, as long as the magnetic field fully trapped during the cavity cooldown is lower than 10 mG.  
slides icon Slides WEB1CO03 [4.500 MB]  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-NAPAC2016-WEB1CO03  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)