MEDSI2018 - List of Authors (Yang, C.K.)

Paper	Title	Page
TUPH19	A Mechanical Undulator Frame to Minimize Intrinsic Phase Errors	69
	J.C. Huang, C.H. Chang, C.-S. Hwang, C.S. Yang, C.K. Yang NSRRC, Hsinchu, Taiwan H. Kitamura RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan S. M. Mizumoto NEOMAX Co., Ltd., Mishima-gun, Osaka, Japan
	A PrFeB-based cryogenic permanent magnet undu-lator (CPMU) is under construction at the Taiwan Photon Source (TPS) to generate brilliant X-rays. When magnets are cooled to 77 K, a CPMU with a period length of 15 mm can generate an effective magnetic field of 1.32 T in a gap of 4 mm. A main feature of the TPS CPMU is its low-intrinsic-phase errors by the installation of force-compensation modules on the out-of-vacuum girders in a four-support-points configuration. Moreover, adjusting the spring settings one can obtain very low undulator phase errors. In this paper, a mechanical frame design for the TPS-CPMU with force-compensating spring modules will be discussed. Observations of deformation effects of the out-of-vacuum girders on the CPMU will be presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-TUPH19
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

A Mechanical Undulator Frame to Minimize Intrinsic Phase Errors

69

J.C. Huang, C.H. Chang, C.-S. Hwang, C.S. Yang, C.K. Yang
NSRRC, Hsinchu, Taiwan
H. Kitamura
RIKEN SPring-8 Center, Sayo-cho, Sayo-gun, Hyogo, Japan
S. M. Mizumoto
NEOMAX Co., Ltd., Mishima-gun, Osaka, Japan

A PrFeB-based cryogenic permanent magnet undu-lator (CPMU) is under construction at the Taiwan Photon Source (TPS) to generate brilliant X-rays. When magnets are cooled to 77 K, a CPMU with a period length of 15 mm can generate an effective magnetic field of 1.32 T in a gap of 4 mm. A main feature of the TPS CPMU is its low-intrinsic-phase errors by the installation of force-compensation modules on the out-of-vacuum girders in a four-support-points configuration. Moreover, adjusting the spring settings one can obtain very low undulator phase errors. In this paper, a mechanical frame design for the TPS-CPMU with force-compensating spring modules will be discussed. Observations of deformation effects of the out-of-vacuum girders on the CPMU will be presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-TUPH19

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)