MEDSI2018 - List of Authors (Ribo, L.)

Paper	Title	Page
WEPH06	Upgrade of Magnetic Measurements Laboratory at ALBA Synchrotron	211
	J. Campmany, F. Becheri, J. Marcos, V. Massana, R. Petrocelli, L. Ribó ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
	Along 2017 and 2018, a complete upgrade of ALBA magnetic measurements lab has been done. Upgrade has affected both hardware and software. Regarding hardware, a relevant innovation has been the replacement of DC motors by step motors in new Hall probe bench and in flipping and rotating coil benches. Up to now, this kind of continuous measurements usually were done using DC motors because step motors were considered unable to fulfil the required smoothness of the movement. However, current step motors state of the art made them compatible with DC. In our case, we have tested the performance of upgraded benches and they reach the same accuracy, or even better. Regarding software, we have unified all motion drivers to ICEPAP and all control system to Tango package, taking advantage of the last ICEPAP firmware. That includes the feature of triggering data acquisition system by signals generated from different axis that can be selected by software.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-WEPH06
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPH17	NCD-SWEET Beamline Upgrade	374
	J.B. González Fernández, C. Colldelram, S. Ferrer, A. Fontserè Recuenco, A.A. Gevorgyan, N. Gonzalez, G. Jover-Mañas, C. Kamma-Lorger, M.L. Llonch, M. Malfois, J.C. Martínez Guil, Y. Nikitin, G. Peña, L. Ribó, I. Sics, E. Solano, J. Villanueva ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
	The SAXS/WAXS Experimental End sTation (NCD-SWEET) at ALBA Synchrotron has undergone major improvements in three main areas, beam performance, SAXS detector data quality and beamline operability, in order to perform state-of-the-art SAXS/WAXS experi-ments. A new channel-cut monochromator system has improved the beam quality and stability, with current vibration amplitudes under 1% of the beam size. Two sets of refractive beryllium lenses have been installed for focussing the beam. One of the sets allows to microfocus the beam size. Besides this, the former SAXS CCD detector has been replaced by a single-photon counting pixel detector, a Piltatus3 S 1M. In the end station, a full re-design of the mechanical elements with sub-micron resolution movements together with the installation of new equipment has been completed, resulting in an improved beamline configuration, and a faster and safer rearrangement of the flight tube length. New upgraded configuration also allows for GISAXS experiments. Finally, other auxiliary improvements have been done in areas like radiation protection, air conditioning, health and safety, cable management, electronics and control.
	Poster THPH17 [5.848 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-THPH17
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Upgrade of Magnetic Measurements Laboratory at ALBA Synchrotron

211

J. Campmany, F. Becheri, J. Marcos, V. Massana, R. Petrocelli, L. Ribó
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain

Along 2017 and 2018, a complete upgrade of ALBA magnetic measurements lab has been done. Upgrade has affected both hardware and software. Regarding hardware, a relevant innovation has been the replacement of DC motors by step motors in new Hall probe bench and in flipping and rotating coil benches. Up to now, this kind of continuous measurements usually were done using DC motors because step motors were considered unable to fulfil the required smoothness of the movement. However, current step motors state of the art made them compatible with DC. In our case, we have tested the performance of upgraded benches and they reach the same accuracy, or even better. Regarding software, we have unified all motion drivers to ICEPAP and all control system to Tango package, taking advantage of the last ICEPAP firmware. That includes the feature of triggering data acquisition system by signals generated from different axis that can be selected by software.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-WEPH06

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPH17

NCD-SWEET Beamline Upgrade

374

J.B. González Fernández, C. Colldelram, S. Ferrer, A. Fontserè Recuenco, A.A. Gevorgyan, N. Gonzalez, G. Jover-Mañas, C. Kamma-Lorger, M.L. Llonch, M. Malfois, J.C. Martínez Guil, Y. Nikitin, G. Peña, L. Ribó, I. Sics, E. Solano, J. Villanueva
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain

The SAXS/WAXS Experimental End sTation (NCD-SWEET) at ALBA Synchrotron has undergone major improvements in three main areas, beam performance, SAXS detector data quality and beamline operability, in order to perform state-of-the-art SAXS/WAXS experi-ments. A new channel-cut monochromator system has improved the beam quality and stability, with current vibration amplitudes under 1% of the beam size. Two sets of refractive beryllium lenses have been installed for focussing the beam. One of the sets allows to microfocus the beam size. Besides this, the former SAXS CCD detector has been replaced by a single-photon counting pixel detector, a Piltatus3 S 1M. In the end station, a full re-design of the mechanical elements with sub-micron resolution movements together with the installation of new equipment has been completed, resulting in an improved beamline configuration, and a faster and safer rearrangement of the flight tube length. New upgraded configuration also allows for GISAXS experiments. Finally, other auxiliary improvements have been done in areas like radiation protection, air conditioning, health and safety, cable management, electronics and control.

Poster THPH17 [5.848 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-THPH17

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)