MEDSI2018 - List of Authors (Liu, Y.)

Paper	Title	Page
TUOPMA02	Mechanical Engineering for SCLF Accelerator
	L. Yin, R.B. Deng, H.W. Du, X. Hu, Z. Jiang, Y. Liu, S. Sun, W. Zhang SINAP, Shanghai, People's Republic of China
	The Shanghai Coherent Light Facility (SCLF) is a hard X-ray free electron laser facility under construction. It is designed to deliver photons from 400eV to 25keV at a repetition rate as high as 1MHz based on an 8GeV superconducting LINAC. The radiator section consists of two variable gap undulator lines and one superconducting undulator line. The main accelerator locates in the 3km tunnel, with 30m underground depths. The mechanical engineering, including the vibration on site ground and in the underground tunnel, the consideration of the tunnel sedimentation monitoring and compensation, as well as the structure design of the main components and it's support are described in this paper.
	Slides TUOPMA02 [15.593 MB]
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPH22	Study on Cooling Technology of the Superconducting Undulator at SSRF	75
	Y. Liu, S. Sun, J. Wang, L. Wang, S.H. Wang SINAP, Shanghai, People's Republic of China
	A superconducting undulator (SCU) prototpye with the period of 16 mm and the magnetic gap of 9.5 mm has been designed and fabricated at the Shanghai Institute of Applied Physics(SINAP) since late 2013. A set of cooling system is designed to cool down cold masses. This paper presents the details of their design, calculation and test: 4 small cryogenic refrigerators are used as cold sources, and the superconducting coil and beam pipe are independently cooled down; The 4.2 K superconducting coil is mainly cooled by the liquid helium tube of the thermosyphon loop with evaporation and recondensation; The 10~20 K ultra-high vacuum beam tube is cooled by heat conduction. The main sources and mechanism of thermal loads for SCU were analyzed. And experimental test of cooling technology for SCU prototype had been performed, the feasibility of cooling scheme and the rationality of the cooling structure for the SINAP SCU prototype were verified. The cryogenic test and operation of the SCU doesn't require the input of liquid helium from the outside, and is not limited by the liquid helium source. This is the characteristic of SINAP's SCU cooling technology.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-TUPH22
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TUOPMA02

Mechanical Engineering for SCLF Accelerator

L. Yin, R.B. Deng, H.W. Du, X. Hu, Z. Jiang, Y. Liu, S. Sun, W. Zhang
SINAP, Shanghai, People's Republic of China

The Shanghai Coherent Light Facility (SCLF) is a hard X-ray free electron laser facility under construction. It is designed to deliver photons from 400eV to 25keV at a repetition rate as high as 1MHz based on an 8GeV superconducting LINAC. The radiator section consists of two variable gap undulator lines and one superconducting undulator line. The main accelerator locates in the 3km tunnel, with 30m underground depths. The mechanical engineering, including the vibration on site ground and in the underground tunnel, the consideration of the tunnel sedimentation monitoring and compensation, as well as the structure design of the main components and it's support are described in this paper.

Slides TUOPMA02 [15.593 MB]

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPH22

Study on Cooling Technology of the Superconducting Undulator at SSRF

75

Y. Liu, S. Sun, J. Wang, L. Wang, S.H. Wang
SINAP, Shanghai, People's Republic of China

A superconducting undulator (SCU) prototpye with the period of 16 mm and the magnetic gap of 9.5 mm has been designed and fabricated at the Shanghai Institute of Applied Physics(SINAP) since late 2013. A set of cooling system is designed to cool down cold masses. This paper presents the details of their design, calculation and test: 4 small cryogenic refrigerators are used as cold sources, and the superconducting coil and beam pipe are independently cooled down; The 4.2 K superconducting coil is mainly cooled by the liquid helium tube of the thermosyphon loop with evaporation and recondensation; The 10~20 K ultra-high vacuum beam tube is cooled by heat conduction. The main sources and mechanism of thermal loads for SCU were analyzed. And experimental test of cooling technology for SCU prototype had been performed, the feasibility of cooling scheme and the rationality of the cooling structure for the SINAP SCU prototype were verified. The cryogenic test and operation of the SCU doesn't require the input of liquid helium from the outside, and is not limited by the liquid helium source. This is the characteristic of SINAP's SCU cooling technology.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-TUPH22

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)