MEDSI2018 - List of Authors (Cianciosi, F.)

Paper	Title	Page
TUPH08	Aluminium and Bimetallic Vacuum Chambers for the New ESRF Storage Ring (EBS)	36
	F. Cianciosi, P.M. Brumund, L. Goirand ESRF, Grenoble, France
	The ESRF is proceeding with the design and procurement of its new low emittance storage ring EBS (Extremely Brilliant Source project). This completely new storage ring requires a new vacuum system including UHV chambers with complex shape and strict geometrical and dimensional tolerances. In order to meet these requirements we decided to build about half of the chambers in aluminum alloy machined from the bulk, the only technology permitting to respect the requirements. The result are 128 chambers, 2.5m long, built in alloy 2219 with Conflat flanges custom made from the chamber supplier by explosion bonding. The production phase is nearly finished, the produced chambers satisfy completely the expectations. A second generation of experimental aluminum chambers was designed as a substitution of some steel ones in order to solve same geometrical difficulties. These chambers are very complex as they have steel-aluminum junctions in the body in order to accommodate bellows and beam position monitor buttons. The delivery of the first prototype of this type of chamber is previewed for June 2018.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-TUPH08
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Aluminium and Bimetallic Vacuum Chambers for the New ESRF Storage Ring (EBS)

36

F. Cianciosi, P.M. Brumund, L. Goirand
ESRF, Grenoble, France

The ESRF is proceeding with the design and procurement of its new low emittance storage ring EBS (Extremely Brilliant Source project). This completely new storage ring requires a new vacuum system including UHV chambers with complex shape and strict geometrical and dimensional tolerances. In order to meet these requirements we decided to build about half of the chambers in aluminum alloy machined from the bulk, the only technology permitting to respect the requirements. The result are 128 chambers, 2.5m long, built in alloy 2219 with Conflat flanges custom made from the chamber supplier by explosion bonding. The production phase is nearly finished, the produced chambers satisfy completely the expectations. A second generation of experimental aluminum chambers was designed as a substitution of some steel ones in order to solve same geometrical difficulties. These chambers are very complex as they have steel-aluminum junctions in the body in order to accommodate bellows and beam position monitor buttons. The delivery of the first prototype of this type of chamber is previewed for June 2018.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-TUPH08

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)