MEDSI2018 - List of Authors (Chang, C.Y.)

Paper	Title	Page
WEPH38	Mechanical Design and Construction of the Coherent X-ray Scattering Beamline at Taiwan Photon Source	286
	H.Y. Yan, C.Y. Chang, C.H. Chang, S.H. Chang, C.Y. Chen, C.C. Chiu, L. Huang, Y.-S. Huang, L. Lee, J.M. Lin, D.G. Liu NSRRC, Hsinchu, Taiwan
	The Coherent X-ray Scattering (CXS) beamline at Taiwan Photon Source has been completely constructed in the end of 2015 and opened for users in the next half year of 2016 successfully. Two In-vacuum Undulators (IU22) with lengths of 3 m and 2 m were used as the Insertion Device (ID) to provide intense synchrotron radiation for the CXS beamline. To achieve the coherent performance, the setup of components in the beamline needs to be considered and designed carefully. As no white-beam diamond window was installed in the upstream beamline for the maintenance of coherent beam, a differential pumping mechanism was evaluated to prevent the worse vacuum condition influencing the front end and the storage ring. A single-crystal diamond filter was also adopted to maintain the coherence of x-ray. The protection of bremsstrahlung radiation for this beamline was designed specifically based on the optical layout. This paper will introduce the detailed mechanical design and current status for the CXS beamline.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-WEPH38
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPH08	Develop Standard Components for TPS Beamline
	C.Y. Chang, C.F. Chang, C.H. Chang, S.H. Chang, H.W. Chen, C.C. Chiu, L. Huang, L. Lee, M.H. Lee, C.Y.L. Liu, H.Y. Yan NSRRC, Hsinchu, Taiwan
	The beamline group is actively doing two new projects. One project is developing of standardization and modularization beamline components for the Taiwan Photon Source (TPS) and Taiwan Light Source (TLS) beamlines. The components including the high heat load masks, white/mono beam slits, phosphor screens type beam monitor system, beam shutters, common chambers, and support tables/stands, are selected as the standards so far. Many advanced concepts and materials are applied for the developing components to improve their stability and reliability. The other project is planning to design a monitor and control system for the beamline components. Some EPICS compatible instruments are being partially tested and will be applied to the new beamlines at TPS.[1-3] The log of beamline status for all beamlines will be recorded and stored in an archive. The purpose of these projects will save not only the cost but also the manpower on construction for several beamlines in time.
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPH29	X-Ray Beam Position Monitor in TPS 24A Beamline
	M.H. Lee, C.Y. Chang, C.H. Chang, S.H. Chang, C.C. Chiu, L. Huang, L. Lai, L. Lee, D.G. Liu, Y. Su, H.Y. Yan NSRRC, Hsinchu, Taiwan
	By contributions of the generic beamline components project in recent years, modular mechanisms such as mask, X-ray beam position monitor (XBPM), photon absorber (PAB), and screens were used in every beamline of the Taiwan Photon Source (TPS). However, these beamline components were designed for ID beamlines, so they should be redesigned for bending magnet (BM) beamlines. The TPS 24A, Soft X-ray Tomography (SXT) beamline, is one of the bending magnet (BM) beamlines in the second construction phase at the TPS. This BM beamline has high flux in the range between 260 eV and 2600 eV. It is designed for transmission full-field imaging of frozen-hydrated biological samples. At the exit slit, the beam flux optimized in 520 eV is 2.82·10¹¹ photons/second with resolving power 2000, the beam size is 50 um × 60 um (V × H, FWHM) and the beam divergence is 1.73 mrad × 1.57 mrad (V × H, FWHM). Since the TPS 24A is commissioning during these months, this paper generally makes a discussion about the XBPM in TPS 24A to help further improvement in the future.
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Mechanical Design and Construction of the Coherent X-ray Scattering Beamline at Taiwan Photon Source

286

H.Y. Yan, C.Y. Chang, C.H. Chang, S.H. Chang, C.Y. Chen, C.C. Chiu, L. Huang, Y.-S. Huang, L. Lee, J.M. Lin, D.G. Liu
NSRRC, Hsinchu, Taiwan

The Coherent X-ray Scattering (CXS) beamline at Taiwan Photon Source has been completely constructed in the end of 2015 and opened for users in the next half year of 2016 successfully. Two In-vacuum Undulators (IU22) with lengths of 3 m and 2 m were used as the Insertion Device (ID) to provide intense synchrotron radiation for the CXS beamline. To achieve the coherent performance, the setup of components in the beamline needs to be considered and designed carefully. As no white-beam diamond window was installed in the upstream beamline for the maintenance of coherent beam, a differential pumping mechanism was evaluated to prevent the worse vacuum condition influencing the front end and the storage ring. A single-crystal diamond filter was also adopted to maintain the coherence of x-ray. The protection of bremsstrahlung radiation for this beamline was designed specifically based on the optical layout. This paper will introduce the detailed mechanical design and current status for the CXS beamline.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2018-WEPH38

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPH08

Develop Standard Components for TPS Beamline

C.Y. Chang, C.F. Chang, C.H. Chang, S.H. Chang, H.W. Chen, C.C. Chiu, L. Huang, L. Lee, M.H. Lee, C.Y.L. Liu, H.Y. Yan
NSRRC, Hsinchu, Taiwan

The beamline group is actively doing two new projects. One project is developing of standardization and modularization beamline components for the Taiwan Photon Source (TPS) and Taiwan Light Source (TLS) beamlines. The components including the high heat load masks, white/mono beam slits, phosphor screens type beam monitor system, beam shutters, common chambers, and support tables/stands, are selected as the standards so far. Many advanced concepts and materials are applied for the developing components to improve their stability and reliability. The other project is planning to design a monitor and control system for the beamline components. Some EPICS compatible instruments are being partially tested and will be applied to the new beamlines at TPS.[1-3] The log of beamline status for all beamlines will be recorded and stored in an archive. The purpose of these projects will save not only the cost but also the manpower on construction for several beamlines in time.

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPH29

X-Ray Beam Position Monitor in TPS 24A Beamline

M.H. Lee, C.Y. Chang, C.H. Chang, S.H. Chang, C.C. Chiu, L. Huang, L. Lai, L. Lee, D.G. Liu, Y. Su, H.Y. Yan
NSRRC, Hsinchu, Taiwan

By contributions of the generic beamline components project in recent years, modular mechanisms such as mask, X-ray beam position monitor (XBPM), photon absorber (PAB), and screens were used in every beamline of the Taiwan Photon Source (TPS). However, these beamline components were designed for ID beamlines, so they should be redesigned for bending magnet (BM) beamlines. The TPS 24A, Soft X-ray Tomography (SXT) beamline, is one of the bending magnet (BM) beamlines in the second construction phase at the TPS. This BM beamline has high flux in the range between 260 eV and 2600 eV. It is designed for transmission full-field imaging of frozen-hydrated biological samples. At the exit slit, the beam flux optimized in 520 eV is 2.82·10¹¹ photons/second with resolving power 2000, the beam size is 50 um × 60 um (V × H, FWHM) and the beam divergence is 1.73 mrad × 1.57 mrad (V × H, FWHM). Since the TPS 24A is commissioning during these months, this paper generally makes a discussion about the XBPM in TPS 24A to help further improvement in the future.

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)