MEDSI2016 - List of Authors (de Olivera, C.)

Paper	Title	Page
TUPE40	Cryo-Ready Undulator U15: Passing SOLEIL’s 2 Meters Threshold in Useful Magnetic Length	249
	M. Tilmont, F. Briquez, N. Béchu, L. Chapuis, M.-E. Couprie, J.M. Dubuisson, J.P. Duval, C. Herbeaux, A. Lestrade, J.L. Marlats, M. Sebdaoui, K.T. Tavakoli, C. de Olivera SOLEIL, Gif-sur-Yvette, France
	The U15 is an in-vacuum undulator designed to operate at room temperature and at 70K. It is the first in-vacuum undulator designed, assembled and which will be used in SOLEIL’s storage ring that have support beams for magnets longer than 2 meters. A clear gap is felt in the technologies used for manufacturing and assembling compared to our standard 2m length in-vacuum undulators. This is due, in part, to the tolerances imposed by the maximum phase error admissible in SOLEIL’s storage ring. The poster will shine lights on those difficulties from a design and manufacturing point of view.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-TUPE40
About •	paper received ※ 11 September 2016 paper accepted ※ 21 September 2016 issue date ※ 22 June 2017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WECA06	Mechanical Engineering Solutions for COXINEL Project	299
	K.T. Tavakoli, T. André, I.A. Andriyash, C. Basset, C. Benabderrahmane, P. Berteaud, S. Bobault, S. Bonnin, F. Bouvet, F. Briquez, L. Chapuis, M.-E. Couprie, D. Dennetière, Y. Dietrich, J.P. Duval, M. El Ajjouri, T.K. El Ajjouri, C. Herbeaux, N. Hubert, M. Khojoyan, M. Labat, N. Leclercq, A. Lestrade, A. Loulergue, O. Marcouillé, F. Marteau, A. Mary, P. N’gotta, F. Polack, P. Rommeluère, M. Sebdaoui, F. Thiam, M. Valléau, J. Vétéran, D. Zerbib, C. de Olivera SOLEIL, Gif-sur-Yvette, France J. Gautier, G. Lambert, V. Malka, J.Y. Roussé, K. Ta Phuoc, C. Thaury LOA, Palaiseau, France E. Roussel Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
	Funding: European Research Council (ERC) advance grant COXINEL (COherent Xray source INferred from Electrons accelerated by Laser) is a European Research Council (ERC) advance grant aims at demonstrating Free Electron Laser amplification at 200 nm with 180 MeV electrons generated by laser plasma acceleration. A special electron beam transfer line with adequate diagnostics has been designed for this project. Strong-focusing variable-field permanent magnet quadrupoles, energy de-mixing chicane and a set of conventional quadrupoles condition the electron beam before its entrance to an In-Vacuum U20 undulator. This presentation describes some of the features incorporated into the design of the magnets, girders, vacuum vessels and diagnostic equipment for this experimental machine. Progress on the equipment preparation and installation is presented as well.
	Slides WECA06 [33.987 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-WECA06
About •	paper received ※ 02 September 2016 paper accepted ※ 15 September 2016 issue date ※ 22 June 2017
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Cryo-Ready Undulator U15: Passing SOLEIL’s 2 Meters Threshold in Useful Magnetic Length

249

M. Tilmont, F. Briquez, N. Béchu, L. Chapuis, M.-E. Couprie, J.M. Dubuisson, J.P. Duval, C. Herbeaux, A. Lestrade, J.L. Marlats, M. Sebdaoui, K.T. Tavakoli, C. de Olivera
SOLEIL, Gif-sur-Yvette, France

The U15 is an in-vacuum undulator designed to operate at room temperature and at 70K. It is the first in-vacuum undulator designed, assembled and which will be used in SOLEIL’s storage ring that have support beams for magnets longer than 2 meters. A clear gap is felt in the technologies used for manufacturing and assembling compared to our standard 2m length in-vacuum undulators. This is due, in part, to the tolerances imposed by the maximum phase error admissible in SOLEIL’s storage ring. The poster will shine lights on those difficulties from a design and manufacturing point of view.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-TUPE40

About •

paper received ※ 11 September 2016 paper accepted ※ 21 September 2016 issue date ※ 22 June 2017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WECA06

Mechanical Engineering Solutions for COXINEL Project

299

K.T. Tavakoli, T. André, I.A. Andriyash, C. Basset, C. Benabderrahmane, P. Berteaud, S. Bobault, S. Bonnin, F. Bouvet, F. Briquez, L. Chapuis, M.-E. Couprie, D. Dennetière, Y. Dietrich, J.P. Duval, M. El Ajjouri, T.K. El Ajjouri, C. Herbeaux, N. Hubert, M. Khojoyan, M. Labat, N. Leclercq, A. Lestrade, A. Loulergue, O. Marcouillé, F. Marteau, A. Mary, P. N’gotta, F. Polack, P. Rommeluère, M. Sebdaoui, F. Thiam, M. Valléau, J. Vétéran, D. Zerbib, C. de Olivera
SOLEIL, Gif-sur-Yvette, France
J. Gautier, G. Lambert, V. Malka, J.Y. Roussé, K. Ta Phuoc, C. Thaury
LOA, Palaiseau, France
E. Roussel
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy

Funding: European Research Council (ERC) advance grant
COXINEL (COherent Xray source INferred from Electrons accelerated by Laser) is a European Research Council (ERC) advance grant aims at demonstrating Free Electron Laser amplification at 200 nm with 180 MeV electrons generated by laser plasma acceleration. A special electron beam transfer line with adequate diagnostics has been designed for this project. Strong-focusing variable-field permanent magnet quadrupoles, energy de-mixing chicane and a set of conventional quadrupoles condition the electron beam before its entrance to an In-Vacuum U20 undulator. This presentation describes some of the features incorporated into the design of the magnets, girders, vacuum vessels and diagnostic equipment for this experimental machine. Progress on the equipment preparation and installation is presented as well.

Slides WECA06 [33.987 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-MEDSI2016-WECA06

About •

paper received ※ 02 September 2016 paper accepted ※ 15 September 2016 issue date ※ 22 June 2017

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)