LINAC2018 - List of Authors (Palmieri, A.)

Paper	Title	Page
TU2A04	Progress Report on LIPAC	308
	M. Sugimoto, T. Akagi, T. Ebisawa, Y. Hirata, R. Ichimiya, A. Kasugai, K. Kondo, S. Maebara, K. Sakamoto, T. Shinya QST, Aomori, Japan P. Abbon, N. Bazin, B. Bolzon, N. Chauvin, S. Chel, R. Gobin, J. Marroncle, B. Renard CEA/IRFU, Gif-sur-Yvette, France L. Antoniazzi, L. Bellan, D. Bortolato, M. Comunian, E. Fagotti, F. Grespan, M. Montis, A. Palmieri, A. Pisent, F. Scantamburlo INFN/LNL, Legnaro (PD), Italy P.-Y. Beauvais, H. Dzitko, D. Gex, R. Heidinger, A. Jokinen, I. Moya, G. Phillips Fusion for Energy, Garching, Germany P. Cara IFMIF/EVEDA, Rokkasho, Japan D. Gavela, D. Jiménez-Rey, I. Kirpitchev, J. Mollá, P. Méndez, I. Podadera, D. Regidor, R. Varela, M. Weber CIEMAT, Madrid, Spain J. Knaster F4E, Barcelona, Spain G. Pruneri Consorzio RFX, Associazione Euratom-ENEA sulla Fusione, Padova, Italy
	International Fusion Materials Irradiation Facility (IFMIF) is the neutron source for simulating fusion reactor environment using two 40 MeV/125 mA CW D⁺ beams. LIPAc facility is under construction in Rokkasho for validating 9 MeV/125 mA CW linac technology as a prototype of the IFMIF accelerator. Commissioning of 5 MeV CW RFQ is underway after the completion of installation of RFQ, MEBT, diagnostic plate. low power beam dump, RF power system and their auxiliaries. As the first step, high power RF conditioning is planned to complete in early 2018 and beam commissioning will start with stepwise approach at the same time. The status of LIPAc construction for preparing 9 MeV acceleration and results of RFQ beam commissioning are presented.
	Slides TU2A04 [9.651 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TU2A04
About •	paper received ※ 12 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO045	Tuning Esperience on the ESS DTL Cold Model	784
	F. Grespan, A. Baldo, P. Bottin, G.S. Mauro, A. Palmieri, A. Pisent INFN/LNL, Legnaro (PD), Italy P. Mereu, M. Mezzano INFN-Torino, Torino, Italy
	An aluminum model of the ESS DTL tank 2 has been delivered to INFN-LNL in december 2017. The tank is 7.1 m long, equipped with movable tuners and movable post couplers. The purpose of this DTL model is to verify the RF design choices (in particular on the first 2 tanks where the Post coupler distribution is irregular) as well as implement and debug algorithms and procedure for stabilization and tuning. The preparatory simulation work and the results of measurements campaign are here presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO045
About •	paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO062	IFMIF/EVEDA RFQ Preliminary Beam Characterization	834
	E. Fagotti, L. Antoniazzi, L. Bellan, M. Comunian, F. Grespan, M. Montis, A. Palmieri, A. Pisent, F. Scantamburlo INFN/LNL, Legnaro (PD), Italy T. Akagi, K. Kondo, K. Sakamoto, T. Shinya, M. Sugimoto QST, Aomori, Japan P. Cara IFMIF/EVEDA, Rokkasho, Japan H. Dzitko, I.M. Moya F4E, Germany R. Heidinger, A. Marqueta Fusion for Energy, Garching, Germany I. Podadera CIEMAT, Madrid, Spain
	The IFMIF/EVEDA RFQ is the longest and powerful operated. Therefore, it requires a careful characterization from several aspects: beam dynamics, RF, mechanics, installation and commissioning. Due to the very large power handling, the preliminary beam operation was decided to be performed with a low proton beam current at one half of the voltage needed for deuteron accelera-tion, i.e. from 8 mA to 30 mA at 2.5 MeV in pulsed mode, with respect to the nominal 130-mA deuteron beam at 5 MeV in CW. In this framework, it will be presented the characterization of the RFQ in terms of simulation and measurements.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO062
About •	paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Progress Report on LIPAC

308

M. Sugimoto, T. Akagi, T. Ebisawa, Y. Hirata, R. Ichimiya, A. Kasugai, K. Kondo, S. Maebara, K. Sakamoto, T. Shinya
QST, Aomori, Japan
P. Abbon, N. Bazin, B. Bolzon, N. Chauvin, S. Chel, R. Gobin, J. Marroncle, B. Renard
CEA/IRFU, Gif-sur-Yvette, France
L. Antoniazzi, L. Bellan, D. Bortolato, M. Comunian, E. Fagotti, F. Grespan, M. Montis, A. Palmieri, A. Pisent, F. Scantamburlo
INFN/LNL, Legnaro (PD), Italy
P.-Y. Beauvais, H. Dzitko, D. Gex, R. Heidinger, A. Jokinen, I. Moya, G. Phillips
Fusion for Energy, Garching, Germany
P. Cara
IFMIF/EVEDA, Rokkasho, Japan
D. Gavela, D. Jiménez-Rey, I. Kirpitchev, J. Mollá, P. Méndez, I. Podadera, D. Regidor, R. Varela, M. Weber
CIEMAT, Madrid, Spain
J. Knaster
F4E, Barcelona, Spain
G. Pruneri
Consorzio RFX, Associazione Euratom-ENEA sulla Fusione, Padova, Italy

International Fusion Materials Irradiation Facility (IFMIF) is the neutron source for simulating fusion reactor environment using two 40 MeV/125 mA CW D⁺ beams. LIPAc facility is under construction in Rokkasho for validating 9 MeV/125 mA CW linac technology as a prototype of the IFMIF accelerator. Commissioning of 5 MeV CW RFQ is underway after the completion of installation of RFQ, MEBT, diagnostic plate. low power beam dump, RF power system and their auxiliaries. As the first step, high power RF conditioning is planned to complete in early 2018 and beam commissioning will start with stepwise approach at the same time. The status of LIPAc construction for preparing 9 MeV acceleration and results of RFQ beam commissioning are presented.

Slides TU2A04 [9.651 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TU2A04

About •

paper received ※ 12 September 2018 paper accepted ※ 21 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO045

Tuning Esperience on the ESS DTL Cold Model

784

F. Grespan, A. Baldo, P. Bottin, G.S. Mauro, A. Palmieri, A. Pisent
INFN/LNL, Legnaro (PD), Italy
P. Mereu, M. Mezzano
INFN-Torino, Torino, Italy

An aluminum model of the ESS DTL tank 2 has been delivered to INFN-LNL in december 2017. The tank is 7.1 m long, equipped with movable tuners and movable post couplers. The purpose of this DTL model is to verify the RF design choices (in particular on the first 2 tanks where the Post coupler distribution is irregular) as well as implement and debug algorithms and procedure for stabilization and tuning. The preparatory simulation work and the results of measurements campaign are here presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO045

About •

paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO062

IFMIF/EVEDA RFQ Preliminary Beam Characterization

834

E. Fagotti, L. Antoniazzi, L. Bellan, M. Comunian, F. Grespan, M. Montis, A. Palmieri, A. Pisent, F. Scantamburlo
INFN/LNL, Legnaro (PD), Italy
T. Akagi, K. Kondo, K. Sakamoto, T. Shinya, M. Sugimoto
QST, Aomori, Japan
P. Cara
IFMIF/EVEDA, Rokkasho, Japan
H. Dzitko, I.M. Moya
F4E, Germany
R. Heidinger, A. Marqueta
Fusion for Energy, Garching, Germany
I. Podadera
CIEMAT, Madrid, Spain

The IFMIF/EVEDA RFQ is the longest and powerful operated. Therefore, it requires a careful characterization from several aspects: beam dynamics, RF, mechanics, installation and commissioning. Due to the very large power handling, the preliminary beam operation was decided to be performed with a low proton beam current at one half of the voltage needed for deuteron accelera-tion, i.e. from 8 mA to 30 mA at 2.5 MeV in pulsed mode, with respect to the nominal 130-mA deuteron beam at 5 MeV in CW. In this framework, it will be presented the characterization of the RFQ in terms of simulation and measurements.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO062

About •

paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)