LINAC2018 - List of Authors (Mezzano, M.)

Paper	Title	Page
MOPO089	Design Details of the European Spallation Source Drift Tube LINAC	190
	P. Mereu, M. Mezzano, C. Mingioni, M. Nenni INFN-Torino, Torino, Italy G. Cibinetto INFN-Ferrara, Ferrara, Italy F. Grespan, A. Pisent INFN/LNL, Legnaro (PD), Italy
	The Drift Tube Linac (DTL) of the European Spallation Source (ESS) is designed to operate at 352.2MHz with a duty cycle of 4% (3 ms pulse length, 14 Hz repetition period) and will accelerate a proton beam of 62.5mA pulse peak current from 3.62 to 90 MeV. This paper gives a detailed overview of the ESS-DTL current mechanical design, and the related driving criteria. It presents also an outlook of the main aspects of the assembly and installation, with related equipments, toolings and procedures.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-MOPO089
About •	paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO045	Tuning Esperience on the ESS DTL Cold Model	784
	F. Grespan, A. Baldo, P. Bottin, G.S. Mauro, A. Palmieri, A. Pisent INFN/LNL, Legnaro (PD), Italy P. Mereu, M. Mezzano INFN-Torino, Torino, Italy
	An aluminum model of the ESS DTL tank 2 has been delivered to INFN-LNL in december 2017. The tank is 7.1 m long, equipped with movable tuners and movable post couplers. The purpose of this DTL model is to verify the RF design choices (in particular on the first 2 tanks where the Post coupler distribution is irregular) as well as implement and debug algorithms and procedure for stabilization and tuning. The preparatory simulation work and the results of measurements campaign are here presented.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO045
About •	paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design Details of the European Spallation Source Drift Tube LINAC

190

P. Mereu, M. Mezzano, C. Mingioni, M. Nenni
INFN-Torino, Torino, Italy
G. Cibinetto
INFN-Ferrara, Ferrara, Italy
F. Grespan, A. Pisent
INFN/LNL, Legnaro (PD), Italy

The Drift Tube Linac (DTL) of the European Spallation Source (ESS) is designed to operate at 352.2MHz with a duty cycle of 4% (3 ms pulse length, 14 Hz repetition period) and will accelerate a proton beam of 62.5mA pulse peak current from 3.62 to 90 MeV. This paper gives a detailed overview of the ESS-DTL current mechanical design, and the related driving criteria. It presents also an outlook of the main aspects of the assembly and installation, with related equipments, toolings and procedures.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-MOPO089

About •

paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO045

Tuning Esperience on the ESS DTL Cold Model

784

F. Grespan, A. Baldo, P. Bottin, G.S. Mauro, A. Palmieri, A. Pisent
INFN/LNL, Legnaro (PD), Italy
P. Mereu, M. Mezzano
INFN-Torino, Torino, Italy

An aluminum model of the ESS DTL tank 2 has been delivered to INFN-LNL in december 2017. The tank is 7.1 m long, equipped with movable tuners and movable post couplers. The purpose of this DTL model is to verify the RF design choices (in particular on the first 2 tanks where the Post coupler distribution is irregular) as well as implement and debug algorithms and procedure for stabilization and tuning. The preparatory simulation work and the results of measurements campaign are here presented.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO045

About •

paper received ※ 12 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)