LINAC2018 - List of Authors (Ferdinand, R.)

Paper	Title	Page
TUPO095	Beam Loading with the First Rebuncher of Spiral2, First Measurements	546
	M. Lechartier, R. Ferdinand, J.F. Leyge GANIL, Caen, France
	In the SPI2 project the middle energy line (LME) is equiped with a radio frequency qupole and three Rebunchers. The subject of this article is to measure and characterise the effect of the beam loading on the first Rebuncher cavity.
	Poster TUPO095 [1.146 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO095
About •	paper received ※ 20 September 2018 paper accepted ※ 15 January 2019 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO047	SPIRAL2 Injector Commissioning	790
THOP01	use link to see paper's listing under its alternate paper code
	R. Ferdinand, M. Di Giacomo, H. Franberg, O. Kamalou, J.-M. Lagniel, G. Normand, A. Savalle, F. Varenne GANIL, Caen, France D. Uriot CEA/DRF/IRFU, Gif-sur-Yvette, France
	The SPIRAL2 injector is composed of two ion sources (p/d and heavy ions up to A/Q=3) followed by a 730 keV/u RFQ. Beam commissioning has started in 2014 in parallel with the superconducting linac and HEBT installations. The RFQ beam commissioning started soon after the first RF conditioning done in October 2015. This paper describes the RFQ beam measurements done on the diagnostic plate for the reference particles (H⁺, 4He2+ and recently 18O6+) and the difficulties encountered for the RFQ commissioning at the A/Q=3 field level.
	Slides THPO047 [7.846 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO047
About •	paper received ※ 11 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Beam Loading with the First Rebuncher of Spiral2, First Measurements

546

M. Lechartier, R. Ferdinand, J.F. Leyge
GANIL, Caen, France

In the SPI2 project the middle energy line (LME) is equiped with a radio frequency qupole and three Rebunchers. The subject of this article is to measure and characterise the effect of the beam loading on the first Rebuncher cavity.

Poster TUPO095 [1.146 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-TUPO095

About •

paper received ※ 20 September 2018 paper accepted ※ 15 January 2019 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPO047

SPIRAL2 Injector Commissioning

790

THOP01

use link to see paper's listing under its alternate paper code

R. Ferdinand, M. Di Giacomo, H. Franberg, O. Kamalou, J.-M. Lagniel, G. Normand, A. Savalle, F. Varenne
GANIL, Caen, France
D. Uriot
CEA/DRF/IRFU, Gif-sur-Yvette, France

The SPIRAL2 injector is composed of two ion sources (p/d and heavy ions up to A/Q=3) followed by a 730 keV/u RFQ. Beam commissioning has started in 2014 in parallel with the superconducting linac and HEBT installations. The RFQ beam commissioning started soon after the first RF conditioning done in October 2015. This paper describes the RFQ beam measurements done on the diagnostic plate for the reference particles (H⁺, 4He2+ and recently 18O6+) and the difficulties encountered for the RFQ commissioning at the A/Q=3 field level.

Slides THPO047 [7.846 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-LINAC2018-THPO047

About •

paper received ※ 11 September 2018 paper accepted ※ 20 September 2018 issue date ※ 18 January 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)