IPAC2022 - List of Authors (Pei, G.)

Paper	Title	Page
TUPOTK053	Design Progress of High Efficiency Klystron for CEPC LINAC	1339
SUSPMF115	use link to see paper's listing under its alternate paper code
	Z.D. Zhang, Y.L. Chi, D. Dong, M. Iqbal, G. Pei, S.C. Wang, O. Xiao, S. Zhang, Z.S. Zhou IHEP, Beijing, People’s Republic of China S. Zhang, Z.D. Zhang UCAS, Beijing, People’s Republic of China
	The injector linear accelerator (LINAC) for the CEPC requires a higher efficiency klystron with 80MW output power than S band 65MW pulsed klys-tron currently operating in LINAC of BEPCII to reduce energy consumption and cost. The efficiency is ex-pected to improve from the currently observed 42% to more than 55% and output power will be improved from 65MW to more than 80MW with same operation voltage. In this paper, BAC bunching method is ap-plied for klystron efficiency improvement. The optimi-zation of the gun and solenoid parameters is complet-ed with 2-D code DGUN and then 3-D code CST. The preliminary design of the cavity parameters is also completed in 1-D disk model based AJDISK code and then further checked by 2-D code EMSYS. Finally, new klystron prototype will be fabricated in Chinese com-pany after design parameters are determined.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOTK053
About •	Received ※ 07 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 17 June 2022
Cite •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

TUPOTK053

Design Progress of High Efficiency Klystron for CEPC LINAC

1339

SUSPMF115

use link to see paper's listing under its alternate paper code

Z.D. Zhang, Y.L. Chi, D. Dong, M. Iqbal, G. Pei, S.C. Wang, O. Xiao, S. Zhang, Z.S. Zhou
IHEP, Beijing, People’s Republic of China
S. Zhang, Z.D. Zhang
UCAS, Beijing, People’s Republic of China

The injector linear accelerator (LINAC) for the CEPC requires a higher efficiency klystron with 80MW output power than S band 65MW pulsed klys-tron currently operating in LINAC of BEPCII to reduce energy consumption and cost. The efficiency is ex-pected to improve from the currently observed 42% to more than 55% and output power will be improved from 65MW to more than 80MW with same operation voltage. In this paper, BAC bunching method is ap-plied for klystron efficiency improvement. The optimi-zation of the gun and solenoid parameters is complet-ed with 2-D code DGUN and then 3-D code CST. The preliminary design of the cavity parameters is also completed in 1-D disk model based AJDISK code and then further checked by 2-D code EMSYS. Finally, new klystron prototype will be fabricated in Chinese com-pany after design parameters are determined.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2022-TUPOTK053

About •

Received ※ 07 June 2022 — Revised ※ 09 June 2022 — Accepted ※ 15 June 2022 — Issue date ※ 17 June 2022

Cite •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)