Author: Gerth, C.
Paper Title Page
WEPGW014 A Non-Invasive THz Spectrometer for Bunch Length Characterization at European XFEL 2495
 
  • N.M. Lockmann, C. Gerth, P. Peier, B. Schmidt, S. Wesch
    DESY, Hamburg, Germany
 
  The European X-ray Free-Electron Laser provides one of the most powerful X-ray laser pulses to a wide range of experiments. These experiments strongly benefit from the exact knowledge of the electron bunch current profile and demand for stable and shortest-possible pulse lengths. During the 2018 summer shutdown, the 4-staged grating spectrometer CRISP* has been installed at a diffraction radiation (DR) beamline just upstream of the undulator beamline switchyard. The DR at final electron beam energies of up to 17.5 GeV enables non-invasive bunch length characterization based on form factor measurements down to a few micrometers. Fast detectors and electronics allow for the characterization of the whole bunch train with repetition rates above 1 MHz. This contribution will present commissioning results of the THz beamline as well as first measured form factors and reconstructed electron current profiles.
* S. Wesch et al., Nuclear Instruments and Methods in Physics Research Section A 665 (2011) pp. 40-47
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW014  
About • paper received ※ 14 May 2019       paper accepted ※ 20 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
WEPGW018 An Ultra-Fast and Wide-Spectrum Linear Array Detector for High Repetition Rate and Pulsed Experiments 2504
 
  • M.M. Patil, E. Bründermann, M. Caselle, S. Funkner, B. Kehrer, A.-S. Müller, G. Niehues, W. Wang, M. Weber
    KIT, Eggenstein-Leopoldshafen, Germany
  • C. Gerth
    DESY, Hamburg, Germany
  • D.R. Makowski, A. Mielczarek
    TUL-DMCS, Łódź, Poland
 
  Funding: "BMBF: is funded by the BMBF contract number: 05K16VKA" (2016-2018) ("NeoDyn")
Photon science research at accelerators is influenced radically by the developments of sensor and readout technologies for imaging. These technologies enable a wide range of applications in beam diagnostics, tomography and spectroscopy. The repetition rate of commercially available linear array detectors is a limiting factor for the emerging synchrotron applications. To overcome these limitations, KALYPSO(Karlsruhe Linear arraY detector for MHz rePetition rateSpectrOscopy), an ultra-fast and wide-field of view linear array detector operating at several mega-frames per second(Mfps), has been developed. A silicon micro-strip sensor is connected to custom cutting-edge front end ASICs to achieve unprecedented frame rate in continuous readout mode. In this contribution, the third generation of KALYPSO will be presented.
 
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEPGW018  
About • paper received ※ 14 May 2019       paper accepted ※ 21 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)  
 
THPRB018 Large-Scale Optical Synchronization System of the European XFEL with Femtosecond Precision 3835
 
  • T. Lamb, M.K. Czwalinna, M. Felber, C. Gerth, T. Kozak, J.M. Müller, H. Schlarb, S. Schulz, C. Sydlo, M. Titberidze, F. Zummack
    DESY, Hamburg, Germany
 
  Femtosecond pulsed optical synchronization systems have evolved over the last few years and are now a mature technique to synchronize FELs. A large-scale femtosecond-precision synchronization system with up to 44 end-stations has been constructed at the European XFEL to meet the FEL synchronization stability requirements. The synchronization system is used to phase-lock various laser systems with femtosecond accuracy, to precisely measure the electron bunch arrival time along the accelerator for fast arrival time feedbacks and to locally phase stabilize the phase of the RF reference signals for the accelerator RF controls on a femtosecond level. The architecture of the large-scale synchronization system and design choices made to achieve the reliability, maintainability and performance requirements are presented together with measurement results from the past year of operation.  
DOI • reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-THPRB018  
About • paper received ※ 15 May 2019       paper accepted ※ 22 May 2019       issue date ※ 21 June 2019  
Export • reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)