IPAC2019 - List of Authors (Fartoukh, S.D.)

Paper	Title	Page
MOPMP033	LHC Run 2 Optics Commissioning Experience in View of HL-LHC	508
	R. Tomás, F.S. Carlier, J.M. Coello de Portugal, J. Dilly, S.D. Fartoukh, E. Fol, D. Gamba, A. Garcia-Tabares, M. Giovannozzi, M. Hofer, E.H. Maclean, L. Malina, T.H.B. Persson, P.K. Skowroński, M. Solfaroli, M.L. Spitznagel, A. Wegscheider, J. Wenninger, D.W. Wolf CERN, Geneva, Switzerland
	LHC Run 2 has achieved a beta lower than a factor 2 below design. This has significantly challenged optics measurement and correction techniques in the linear and non-linear regimes, leading to the development of new approaches. Furthermore, experimenting with a large variety of optics has allowed facing the difficulties of future optics and gaining understanding of the machine imperfections. A summary of these aspects is given in view of their implications for the HL-LHC Project.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP033
About •	paper received ※ 07 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP037	Updated High-Energy LHC Design	524
	F. Zimmermann, D. Amorim, S.A. Antipov, S. Arsenyev, M. Benedikt, R. Bruce, M.P. Crouch, S.D. Fartoukh, M. Giovannozzi, B. Goddard, M. Hofer, J. Keintzel, R. Kersevan, V. Mertens, J. Molson, Y. Muttoni, J.A. Osborne, V. Parma, V. Raginel, S. Redaelli, T. Risselada, I. Ruehl, B. Salvant, D. Schoerling, E.N. Shaposhnikova, L.J. Tavian, E. Todesco, R. Tomás, D. Tommasini, F. Valchkova-Georgieva, V. Venturi, D. Wollmann CERN, Geneva, Switzerland J.L. Abelleira, A. Abramov, E. Cruz Alaniz, H. Pikhartova, A. Seryi, L. van Riesen-Haupt JAI, Oxford, United Kingdom A. Apyan ANSL, Yerevan, Armenia J. Barranco García, L. Mether, T. Pieloni, L. Rivkin, C. Tambasco EPFL, Lausanne, Switzerland F. Burkart DESY, Hamburg, Germany Y. Cai, Y.M. Nosochkov SLAC, Menlo Park, California, USA G. Guillermo Cantón CINVESTAV, Mérida, Mexico K. Ohmi, K. Oide, D. Zhou KEK, Ibaraki, Japan
	Funding: This work was supported in part by the European Commission under the HORIZON 2020 project ARIES no.730871, and by the Swiss Accelerator Research and Technology collaboration CHART. We present updated design parameters for a future High-Energy LHC. A more realistic turnaround time has led to a revision of the target peak luminosity, as well as a choice of a larger IP beta function, and longer physics fills. Pushed parameters of the Nb₃Sn superconducting cable together with a modified layout of the 16 T dipole magnets resulted in revised field errors, updated dynamic-aperture simulations, and an associated re-evaluation of injector options. Collimators in the dispersion suppressors help achieve satisfactory cleaning performance. Longitudinal beam parameters ensure beam stability throughout the cycle. Intrabeam scattering rates and Touschek lifetime appear benign.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP037
About •	paper received ※ 10 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP052	Numerical Simulations of the DC Wire Prototypes in LHC for Enhancing the HL-LHC Performances	566
	A. Poyet Université Grenoble Alpes, Grenoble, France S.D. Fartoukh, N. Karastathis, Y. Papaphilippou, K. Skoufaris, G. Sterbini CERN, Geneva, Switzerland
	For the last 15 years, the compensation of the Beam-Beam Long-Range (BBLR) interaction in colliders using DC wires has been studied. In 2015, in the frame of the HL-LHC project, it has been shown that a compensation of all the Resonance Driving Terms (RDTs) generated by the BBLR interaction is possible using wires with constraints on their transverse and longitudinal positions. In 2017, an experimental campaign has been launched in the present LHC, with wires installed in sub-optimal positions due to integration constraints. The aim of this paper is therefore to apply the formalism developped for HL-LHC to the LHC case and to compare the experimental results to the numerical tracking studies of the compensation using wires.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP052
About •	paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP053	Numerical Optimization of DC Wire Compensation in HL-LHC	570
	K. Skoufaris, S.D. Fartoukh, N. Karastathis, Y. Papaphilippou, D. Pellegrini, A. Poyet, A. Rossi, G. Sterbini CERN, Geneva, Switzerland
	The electromagnetic field generated from a set of DC wires parallel to the beam opens the path to the compensation of the beam-beam long-range (BBLR) interactions for the future operation of large hadron colliders, in particular for the upcoming High Luminosity upgrade of the Large Hadron Collider (HL-LHC). The effectiveness and simplicity of a current carrying wire are critical for overcoming some technical constraints of the machine. In order to better understand the potential of this device for the HL-LHC, various simulation studies are presented. The different observables are the dynamic aperture and the frequency analysis.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP053
About •	paper received ※ 03 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYYPLM2	The 2018 Heavy-Ion Run of the LHC	2258
	J.M. Jowett, C. Bahamonde Castro, W. Bartmann, C. Bracco, R. Bruce, J.M. Coello de Portugal, J. Dilly, S.D. Fartoukh, E. Fol, N. Fuster-Martínez, A. Garcia-Tabares, M. Hofer, E.B. Holzer, M.A. Jebramcik, J. Keintzel, A. Lechner, E.H. Maclean, L. Malina, T. Medvedeva, A. Mereghetti, T.H.B. Persson, B.Aa. Petersen, S. Redaelli, B. Salvachua, M. Schaumann, C. Schwick, M. Solfaroli, M.L. Spitznagel, H. Timko, R. Tomás, A. Wegscheider, J. Wenninger, D. Wollmann CERN, Meyrin, Switzerland D. Mirarchi The University of Manchester, The Photon Science Institute, Manchester, United Kingdom
	The fourth one-month Pb-Pb collision run brought LHC Run 2 to an end in December 2018. Following the tendency to reduce dependence on the configuration of the preceding proton run, a completely new optics cycle with the strongest ever focussing at the ALICE and LHCb experiments was designed and rapidly implemented, demonstrating the maturity of the collider’s operating modes. Beam-loss monitor thresholds were carefully adjusted to provide optimal protection from the multiple loss mechanisms in heavy-ion operation. A switch from a basic bunch-spacing of 100 ns to 75 ns was made as the beam became available from the injector chain. A new record luminosity, 6 times the original design and close to the operating value proposed for HL-LHC, provided validation of the strategy for mitigating quenches due to bound-free pair production (BFPP) at the interaction points of the ATLAS and CMS experiments. Most of the beam parameters of the HL-LHC Pb-Pb upgrade were attained during this run and the integrated luminosity goals for the first 10 years of LHC operation were substantially exceeded.
	Slides WEYYPLM2 [10.884 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYYPLM2
About •	paper received ※ 08 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYYPLM3	First Results of the Compensation of the Beam-Beam Effect with DC Wires in the LHC	2262
	G. Sterbini, D. Amorim, H. Bartosik, A. Bertarelli, R. Bruce, X. Buffat, F. Carra, L.R. Carver, G. Cattenoz, E. Effinger, S.D. Fartoukh, N. Fuster-Martínez, M. Gąsior, M. Gonzalez-Berges, A.A. Gorzawski, G.H. Hemelsoet, M. Hostettler, G. Iadarola, O.R. Jones, N. Karastathis, S. Kostoglou, I. Lamas Garcia, T.E. Levens, L.E. Medina Medrano, D. Mirarchi, J. Olexa, S. Papadopoulou, Y. Papaphilippou, D. Pellegrini, M. Pojer, L. Ponce, A. Poyet, S. Redaelli, A. Rossi, B. Salvachua, H. Schmickler, F. Schmidt, K. Skoufaris, M. Solfaroli, R. Tomás, G. Trad, D. Valuch, C. Xu, C. Zamantzas, P. Zisopoulos CERN, Geneva, Switzerland D. Amorim Grenoble-INP Phelma, Grenoble, France M. Fitterer, A. Valishev Fermilab, Batavia, Illinois, USA D. Kaltchev TRIUMF, Vancouver, Canada S. Kostoglou National Technical University of Athens, Zografou, Greece A.E. Levichev BINP SB RAS, Novosibirsk, Russia A. Poyet Université Grenoble Alpes, Grenoble, France
	The compensation of the long-range beam-beam interactions using DC wires is presently under study as an option for enhancing the machine performance in the frame of the High-Luminosity LHC project (HL-LHC). The original idea dates back more than 15 years. After the installation of four wire prototypes in the LHC in 2018, a successful experimental campaign was performed during the last months. The experimental setup and the main results are reported in this paper.
	Slides WEYYPLM3 [6.371 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYYPLM3
About •	paper received ※ 06 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

LHC Run 2 Optics Commissioning Experience in View of HL-LHC

508

R. Tomás, F.S. Carlier, J.M. Coello de Portugal, J. Dilly, S.D. Fartoukh, E. Fol, D. Gamba, A. Garcia-Tabares, M. Giovannozzi, M. Hofer, E.H. Maclean, L. Malina, T.H.B. Persson, P.K. Skowroński, M. Solfaroli, M.L. Spitznagel, A. Wegscheider, J. Wenninger, D.W. Wolf
CERN, Geneva, Switzerland

LHC Run 2 has achieved a beta lower than a factor 2 below design. This has significantly challenged optics measurement and correction techniques in the linear and non-linear regimes, leading to the development of new approaches. Furthermore, experimenting with a large variety of optics has allowed facing the difficulties of future optics and gaining understanding of the machine imperfections. A summary of these aspects is given in view of their implications for the HL-LHC Project.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP033

About •

paper received ※ 07 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP037

Updated High-Energy LHC Design

524

F. Zimmermann, D. Amorim, S.A. Antipov, S. Arsenyev, M. Benedikt, R. Bruce, M.P. Crouch, S.D. Fartoukh, M. Giovannozzi, B. Goddard, M. Hofer, J. Keintzel, R. Kersevan, V. Mertens, J. Molson, Y. Muttoni, J.A. Osborne, V. Parma, V. Raginel, S. Redaelli, T. Risselada, I. Ruehl, B. Salvant, D. Schoerling, E.N. Shaposhnikova, L.J. Tavian, E. Todesco, R. Tomás, D. Tommasini, F. Valchkova-Georgieva, V. Venturi, D. Wollmann
CERN, Geneva, Switzerland
J.L. Abelleira, A. Abramov, E. Cruz Alaniz, H. Pikhartova, A. Seryi, L. van Riesen-Haupt
JAI, Oxford, United Kingdom
A. Apyan
ANSL, Yerevan, Armenia
J. Barranco García, L. Mether, T. Pieloni, L. Rivkin, C. Tambasco
EPFL, Lausanne, Switzerland
F. Burkart
DESY, Hamburg, Germany
Y. Cai, Y.M. Nosochkov
SLAC, Menlo Park, California, USA
G. Guillermo Cantón
CINVESTAV, Mérida, Mexico
K. Ohmi, K. Oide, D. Zhou
KEK, Ibaraki, Japan

Funding: This work was supported in part by the European Commission under the HORIZON 2020 project ARIES no.730871, and by the Swiss Accelerator Research and Technology collaboration CHART.
We present updated design parameters for a future High-Energy LHC. A more realistic turnaround time has led to a revision of the target peak luminosity, as well as a choice of a larger IP beta function, and longer physics fills. Pushed parameters of the Nb₃Sn superconducting cable together with a modified layout of the 16 T dipole magnets resulted in revised field errors, updated dynamic-aperture simulations, and an associated re-evaluation of injector options. Collimators in the dispersion suppressors help achieve satisfactory cleaning performance. Longitudinal beam parameters ensure beam stability throughout the cycle. Intrabeam scattering rates and Touschek lifetime appear benign.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP037

About •

paper received ※ 10 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP052

Numerical Simulations of the DC Wire Prototypes in LHC for Enhancing the HL-LHC Performances

566

A. Poyet
Université Grenoble Alpes, Grenoble, France
S.D. Fartoukh, N. Karastathis, Y. Papaphilippou, K. Skoufaris, G. Sterbini
CERN, Geneva, Switzerland

For the last 15 years, the compensation of the Beam-Beam Long-Range (BBLR) interaction in colliders using DC wires has been studied. In 2015, in the frame of the HL-LHC project, it has been shown that a compensation of all the Resonance Driving Terms (RDTs) generated by the BBLR interaction is possible using wires with constraints on their transverse and longitudinal positions. In 2017, an experimental campaign has been launched in the present LHC, with wires installed in sub-optimal positions due to integration constraints. The aim of this paper is therefore to apply the formalism developped for HL-LHC to the LHC case and to compare the experimental results to the numerical tracking studies of the compensation using wires.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP052

About •

paper received ※ 06 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMP053

Numerical Optimization of DC Wire Compensation in HL-LHC

570

K. Skoufaris, S.D. Fartoukh, N. Karastathis, Y. Papaphilippou, D. Pellegrini, A. Poyet, A. Rossi, G. Sterbini
CERN, Geneva, Switzerland

The electromagnetic field generated from a set of DC wires parallel to the beam opens the path to the compensation of the beam-beam long-range (BBLR) interactions for the future operation of large hadron colliders, in particular for the upcoming High Luminosity upgrade of the Large Hadron Collider (HL-LHC). The effectiveness and simplicity of a current carrying wire are critical for overcoming some technical constraints of the machine. In order to better understand the potential of this device for the HL-LHC, various simulation studies are presented. The different observables are the dynamic aperture and the frequency analysis.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-MOPMP053

About •

paper received ※ 03 May 2019 paper accepted ※ 20 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYYPLM2

The 2018 Heavy-Ion Run of the LHC

2258

J.M. Jowett, C. Bahamonde Castro, W. Bartmann, C. Bracco, R. Bruce, J.M. Coello de Portugal, J. Dilly, S.D. Fartoukh, E. Fol, N. Fuster-Martínez, A. Garcia-Tabares, M. Hofer, E.B. Holzer, M.A. Jebramcik, J. Keintzel, A. Lechner, E.H. Maclean, L. Malina, T. Medvedeva, A. Mereghetti, T.H.B. Persson, B.Aa. Petersen, S. Redaelli, B. Salvachua, M. Schaumann, C. Schwick, M. Solfaroli, M.L. Spitznagel, H. Timko, R. Tomás, A. Wegscheider, J. Wenninger, D. Wollmann
CERN, Meyrin, Switzerland
D. Mirarchi
The University of Manchester, The Photon Science Institute, Manchester, United Kingdom

The fourth one-month Pb-Pb collision run brought LHC Run 2 to an end in December 2018. Following the tendency to reduce dependence on the configuration of the preceding proton run, a completely new optics cycle with the strongest ever focussing at the ALICE and LHCb experiments was designed and rapidly implemented, demonstrating the maturity of the collider’s operating modes. Beam-loss monitor thresholds were carefully adjusted to provide optimal protection from the multiple loss mechanisms in heavy-ion operation. A switch from a basic bunch-spacing of 100 ns to 75 ns was made as the beam became available from the injector chain. A new record luminosity, 6 times the original design and close to the operating value proposed for HL-LHC, provided validation of the strategy for mitigating quenches due to bound-free pair production (BFPP) at the interaction points of the ATLAS and CMS experiments. Most of the beam parameters of the HL-LHC Pb-Pb upgrade were attained during this run and the integrated luminosity goals for the first 10 years of LHC operation were substantially exceeded.

Slides WEYYPLM2 [10.884 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYYPLM2

About •

paper received ※ 08 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEYYPLM3

First Results of the Compensation of the Beam-Beam Effect with DC Wires in the LHC

2262

G. Sterbini, D. Amorim, H. Bartosik, A. Bertarelli, R. Bruce, X. Buffat, F. Carra, L.R. Carver, G. Cattenoz, E. Effinger, S.D. Fartoukh, N. Fuster-Martínez, M. Gąsior, M. Gonzalez-Berges, A.A. Gorzawski, G.H. Hemelsoet, M. Hostettler, G. Iadarola, O.R. Jones, N. Karastathis, S. Kostoglou, I. Lamas Garcia, T.E. Levens, L.E. Medina Medrano, D. Mirarchi, J. Olexa, S. Papadopoulou, Y. Papaphilippou, D. Pellegrini, M. Pojer, L. Ponce, A. Poyet, S. Redaelli, A. Rossi, B. Salvachua, H. Schmickler, F. Schmidt, K. Skoufaris, M. Solfaroli, R. Tomás, G. Trad, D. Valuch, C. Xu, C. Zamantzas, P. Zisopoulos
CERN, Geneva, Switzerland
D. Amorim
Grenoble-INP Phelma, Grenoble, France
M. Fitterer, A. Valishev
Fermilab, Batavia, Illinois, USA
D. Kaltchev
TRIUMF, Vancouver, Canada
S. Kostoglou
National Technical University of Athens, Zografou, Greece
A.E. Levichev
BINP SB RAS, Novosibirsk, Russia
A. Poyet
Université Grenoble Alpes, Grenoble, France

The compensation of the long-range beam-beam interactions using DC wires is presently under study as an option for enhancing the machine performance in the frame of the High-Luminosity LHC project (HL-LHC). The original idea dates back more than 15 years. After the installation of four wire prototypes in the LHC in 2018, a successful experimental campaign was performed during the last months. The experimental setup and the main results are reported in this paper.

Slides WEYYPLM3 [6.371 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEYYPLM3

About •

paper received ※ 06 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)