IPAC2019 - List of Authors (Di Mitri, S.)

Paper	Title	Page
TUPRB032	The CompactLight Design Study Project	1756
	G. D’Auria, S. Di Mitri, R.A. Rochow Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy M. Aicheler HIP, University of Helsinki, Finland A.A. Aksoy Ankara University, Accelerator Technologies Institute, Golbasi, Turkey D. Alesini, M. Bellaveglia, B. Buonomo, F. Cardelli, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, L. Piersanti, B. Spataro, C. Vaccarezza INFN/LNF, Frascati, Italy R. Apsimon, A. Castilla Cockcroft Institute, Lancaster University, Lancaster, United Kingdom J.M. Arnesano, F. Bosco, L. Ficcadenti, A. Mostacci, L. Palumbo Sapienza University of Rome, Rome, Italy A. Bernhard, J. Gethmann KIT, Karlsruhe, Germany G. Burt Lancaster University, Lancaster, United Kingdom M. Calvi, T. Schmidt, K. Zhang PSI, Villigen PSI, Switzerland H.M. Castaneda Cortes, J.A. Clarke, D.J. Dunning, N. Thompson STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom A.W. Cross, L. Zhang USTRAT/SUPA, Glasgow, United Kingdom G. Dattoli, F. Nguyen, A. Petralia ENEA C.R. Frascati, Frascati (Roma), Italy R.T. Dowd, D. Zhu AS - ANSTO, Clayton, Australia W.D. Fang SINAP, Shanghai, People’s Republic of China A. Faus-Golfe, Y. Han LAL, Orsay, France E.N. Gazis, N. Gazis National Technical University of Athens, Zografou, Greece R. Geometrante, M. Kokole KYMA, Trieste, Italy V.A. Goryashko, M. Jacewicz, R.J.M.Y. Ruber Uppsala University, Uppsala, Sweden X.J.A. Janssen, J.M.A. Priem VDL ETG, Eindhoven, The Netherlands A. Latina, X. Liu, C. Rossi, D. Schulte, S. Stapnes, X.W. Wu, W. Wuensch CERN, Geneva, Switzerland O.J. Luiten, P.H.A. Mutsaers, X.F.D. Stragier TUE, Eindhoven, The Netherlands J. Marcos, E. Marín, R. Muñoz Horta, F. Pérez ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain G. Taylor The University of Melbourne, Melbourne, Victoria, Australia
	Funding: This project has received funding from the European Union’s Horizon2020 research and innovation programme under grant agreement No 777431 The H₂020 CompactLight Project (www. CompactLight.eu) aims at designing the next generation of compact X-rays Free-Electron Lasers, relying on very high gradient accelerating structures (X-band, 12 GHz), the most advanced concepts for bright electron photo injectors, and innovative compact short-period undulators. Compared to existing facilities, the proposed facility will benefit from a lower electron beam energy, due to the enhanced undulators performance, and will be significantly more compact, with a smaller footprint, as a consequence of the lower energy and the high-gradient X-band structures. In addition, the whole infrastructure will also have a lower electrical power demand as well as lower construction and running costs.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB032
About •	paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB074	Start-to-End Simulations of the Compact Light Project Based on an S-Band Injector and an X-Band LINAC	1836
	E. Marín, R. Muñoz Horta, F. Pérez ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain A.A. Aksoy Ankara University, Accelerator Technologies Institute, Golbasi, Turkey S. Di Mitri Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy A. Latina CERN, Geneva, Switzerland S.B. van der Geer Pulsar Physics, Eindhoven, The Netherlands
	Funding: This project has received funding from the European Union’s Horizon2020 research and innovation programme under grant agreement No 777431 In this paper we report the start-to-end simulation results of one of the options under consideration for the CompactLight Project (XLS). The XLS is a hard X-ray Free Electron Laser under design, using the latest concepts for bright electron photo injectors, very high-gradient X-band structures, and innovative short-period undulators. Presently there exist various tracking codes to conduct the design process. Therefore identifying the most convenient code is of notable importance. This paper compares the tracking codes, Placet and General Particle Tracer, using the XLS lattice based on a S and X-band Injector. The calculation results in terms of beam quality and tracking performance of a full 6-D simulation are presented. [] The CompactLight Design Study Project, IPAC2019 proceedings.*
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB074
About •	paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXXPLM1	Amplified Emission of a Soft-X Ray Free-Electron Laser Based on Echo-Enabled Harmonic Generation	2230
	E. Allaria, L. Badano, G. De Ninno, S. Di Mitri, B. Diviacco, W.M. Fawley, N.S. Mirian, G. Penco, P. Rebernik Ribič, S. Spampinati, C. Spezzani, M. Trovò Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy G. De Ninno University of Nova Gorica, Nova Gorica, Slovenia E. Ferrari, E. Prat PSI, Villigen PSI, Switzerland D. Garzella CEA, Gif-sur-Yvette, France V. Grattoni DESY, Hamburg, Germany E. Hemsing SLAC, Menlo Park, California, USA M.A. Pop MAX IV Laboratory, Lund University, Lund, Sweden E. Roussel PhLAM/CERLA, Villeneuve d’Ascq, France D. Xiang Shanghai Jiao Tong University, Shanghai, People’s Republic of China
	We report the first evidence of substantial gain in a soft-X ray Free Electron Laser (FEL) based on Echo-Enabled Harmonic Generation (EEHG). The experiment was focused on harmonics 36 (~7.3nm) and 45 (5.8 nm) and clearly demonstrated the expected EEHG capability of generating powerful and coherent FEL pulses, with strongly reduced sensitivity to electron-beam fluctuations. The experiment was carried out at FERMI, the seeded FEL user facility at Elettra-Sincrotrone Trieste.
	Slides WEXXPLM1 [11.410 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEXXPLM1
About •	paper received ※ 17 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

The CompactLight Design Study Project

1756

G. D’Auria, S. Di Mitri, R.A. Rochow
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
M. Aicheler
HIP, University of Helsinki, Finland
A.A. Aksoy
Ankara University, Accelerator Technologies Institute, Golbasi, Turkey
D. Alesini, M. Bellaveglia, B. Buonomo, F. Cardelli, M. Croia, M. Diomede, M. Ferrario, A. Gallo, A. Giribono, L. Piersanti, B. Spataro, C. Vaccarezza
INFN/LNF, Frascati, Italy
R. Apsimon, A. Castilla
Cockcroft Institute, Lancaster University, Lancaster, United Kingdom
J.M. Arnesano, F. Bosco, L. Ficcadenti, A. Mostacci, L. Palumbo
Sapienza University of Rome, Rome, Italy
A. Bernhard, J. Gethmann
KIT, Karlsruhe, Germany
G. Burt
Lancaster University, Lancaster, United Kingdom
M. Calvi, T. Schmidt, K. Zhang
PSI, Villigen PSI, Switzerland
H.M. Castaneda Cortes, J.A. Clarke, D.J. Dunning, N. Thompson
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
A.W. Cross, L. Zhang
USTRAT/SUPA, Glasgow, United Kingdom
G. Dattoli, F. Nguyen, A. Petralia
ENEA C.R. Frascati, Frascati (Roma), Italy
R.T. Dowd, D. Zhu
AS - ANSTO, Clayton, Australia
W.D. Fang
SINAP, Shanghai, People’s Republic of China
A. Faus-Golfe, Y. Han
LAL, Orsay, France
E.N. Gazis, N. Gazis
National Technical University of Athens, Zografou, Greece
R. Geometrante, M. Kokole
KYMA, Trieste, Italy
V.A. Goryashko, M. Jacewicz, R.J.M.Y. Ruber
Uppsala University, Uppsala, Sweden
X.J.A. Janssen, J.M.A. Priem
VDL ETG, Eindhoven, The Netherlands
A. Latina, X. Liu, C. Rossi, D. Schulte, S. Stapnes, X.W. Wu, W. Wuensch
CERN, Geneva, Switzerland
O.J. Luiten, P.H.A. Mutsaers, X.F.D. Stragier
TUE, Eindhoven, The Netherlands
J. Marcos, E. Marín, R. Muñoz Horta, F. Pérez
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
G. Taylor
The University of Melbourne, Melbourne, Victoria, Australia

Funding: This project has received funding from the European Union’s Horizon2020 research and innovation programme under grant agreement No 777431
The H₂020 CompactLight Project (www. CompactLight.eu) aims at designing the next generation of compact X-rays Free-Electron Lasers, relying on very high gradient accelerating structures (X-band, 12 GHz), the most advanced concepts for bright electron photo injectors, and innovative compact short-period undulators. Compared to existing facilities, the proposed facility will benefit from a lower electron beam energy, due to the enhanced undulators performance, and will be significantly more compact, with a smaller footprint, as a consequence of the lower energy and the high-gradient X-band structures. In addition, the whole infrastructure will also have a lower electrical power demand as well as lower construction and running costs.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB032

About •

paper received ※ 15 May 2019 paper accepted ※ 22 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPRB074

Start-to-End Simulations of the Compact Light Project Based on an S-Band Injector and an X-Band LINAC

1836

E. Marín, R. Muñoz Horta, F. Pérez
ALBA-CELLS Synchrotron, Cerdanyola del Vallès, Spain
A.A. Aksoy
Ankara University, Accelerator Technologies Institute, Golbasi, Turkey
S. Di Mitri
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
A. Latina
CERN, Geneva, Switzerland
S.B. van der Geer
Pulsar Physics, Eindhoven, The Netherlands

Funding: This project has received funding from the European Union’s Horizon2020 research and innovation programme under grant agreement No 777431
In this paper we report the start-to-end simulation results of one of the options under consideration for the CompactLight Project (XLS). The XLS is a hard X-ray Free Electron Laser under design, using the latest concepts for bright electron photo injectors, very high-gradient X-band structures, and innovative short-period undulators. Presently there exist various tracking codes to conduct the design process. Therefore identifying the most convenient code is of notable importance. This paper compares the tracking codes, Placet and General Particle Tracer, using the XLS lattice based on a S and X-band Injector. The calculation results in terms of beam quality and tracking performance of a full 6-D simulation are presented.
[*] The CompactLight Design Study Project, IPAC2019 proceedings.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-TUPRB074

About •

paper received ※ 15 May 2019 paper accepted ※ 21 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEXXPLM1

Amplified Emission of a Soft-X Ray Free-Electron Laser Based on Echo-Enabled Harmonic Generation

2230

E. Allaria, L. Badano, G. De Ninno, S. Di Mitri, B. Diviacco, W.M. Fawley, N.S. Mirian, G. Penco, P. Rebernik Ribič, S. Spampinati, C. Spezzani, M. Trovò
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
G. De Ninno
University of Nova Gorica, Nova Gorica, Slovenia
E. Ferrari, E. Prat
PSI, Villigen PSI, Switzerland
D. Garzella
CEA, Gif-sur-Yvette, France
V. Grattoni
DESY, Hamburg, Germany
E. Hemsing
SLAC, Menlo Park, California, USA
M.A. Pop
MAX IV Laboratory, Lund University, Lund, Sweden
E. Roussel
PhLAM/CERLA, Villeneuve d’Ascq, France
D. Xiang
Shanghai Jiao Tong University, Shanghai, People’s Republic of China

We report the first evidence of substantial gain in a soft-X ray Free Electron Laser (FEL) based on Echo-Enabled Harmonic Generation (EEHG). The experiment was focused on harmonics 36 (~7.3nm) and 45 (5.8 nm) and clearly demonstrated the expected EEHG capability of generating powerful and coherent FEL pulses, with strongly reduced sensitivity to electron-beam fluctuations. The experiment was carried out at FERMI, the seeded FEL user facility at Elettra-Sincrotrone Trieste.

Slides WEXXPLM1 [11.410 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IPAC2019-WEXXPLM1

About •

paper received ※ 17 May 2019 paper accepted ※ 23 May 2019 issue date ※ 21 June 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)