IPAC2016 - List of Authors (Tecker, F.)

Paper	Title	Page
MOPMR024	A Versatile Beam Loss Monitoring System for CLIC	286
SUPSS070	use link to see paper's listing under its alternate paper code
	M. Kastriotou, S. Döbert, W. Farabolini, E.B. Holzer, E. Nebot Del Busto, F. Tecker CERN, Geneva, Switzerland M. Kastriotou, E. Nebot Del Busto, C.P. Welsch The University of Liverpool, Liverpool, United Kingdom M. Kastriotou, C.P. Welsch Cockcroft Institute, Warrington, Cheshire, United Kingdom
	The design of a potential CLIC beam loss monitoring (BLM) system presents multiple challenges. To successfully cover the 48 km of beamline, ionisation chambers and optical fibre BLMs are under investigation. The former fulfils all CLIC requirements but would need more than 40000 monitors to protect the whole facility. For the latter, the capability of reconstructing the original loss position with a multi-bunch beam pulse and multiple loss locations still needs to be quantified. Two main sources of background for beam loss measurements are identified for CLIC. The two-beam accelerator scheme introduces so-called crosstalk, i.e. detection of losses originating in one beam line by the monitors protecting the other. Moreover, electrons emitted from the inner surface of RF cavities and boosted by the high RF gradients may produce signals in neighbouring BLMs, limiting their ability to detect real beam losses. This contribution presents the results of dedicated experiments performed in the CLIC Test Facility to quantify the position resolution of optical fibre BLMs in a multi-bunch, multi-loss scenario as well as the sensitivity limitations due to crosstalk and electron field emission.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMB046	Status and Plans for Completion of the Experimental Programme of the Clic Test Facility Ctf3	3347
	P.K. Skowroński, R. Corsini, S. Döbert, W. Farabolini, D. Gamba, L. Malina, T. Persson, F. Tecker CERN, Geneva, Switzerland W. Farabolini CEA/DSM/IRFU, France D. Gamba JAI, Oxford, United Kingdom
	The CLIC Test Facility CTF3 was build, commissioned and operated at CERN by an international collaboration, with the aim of validating the CLIC two beam acceleration scheme, in which the RF power used to accelerate e⁺/e⁻ beams is extracted from a high intensity electron beam. In the past years the main issues of such a scheme were assessed, demonstrating its feasibility. The CTF3 experimental programme is complementing these results by addressing cost and performance subjects, mainly using the CALIFES test beam injector and a full scale two-beam module. In this paper we document the present status and give an outlook to next year run, when the experimental programme should be completed.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR031	Beam-Loading Effect on Breakdown Rate in High-Gradient Accelerating Structures	3848
	F. Tecker, T. Argyropoulos, N. Catalán Lasheras, R. Corsini, A. Degiovanni, D. Gamba, J. Giner Navarro, A. Grudiev, G. McMonagle, J.L. Navarro Quirante, R. Rajamaki, E. Senes, I. Syratchev, B.J. Woolley, W. Wuensch CERN, Geneva, Switzerland T. Argyropoulos, J. Giner Navarro IFIC, Valencia, Spain A. Degiovanni, J.L. Navarro Quirante ADAM, Geneva, Switzerland D. Gamba JAI, Oxford, United Kingdom R. Rajamaki Aalto University, School of Science and Technology, Aalto, Finland E. Senes Torino University, Torino, Italy J. Tagg National Instruments Switzerland, Ennetbaden, Switzerland
	The Compact Linear Collider (CLIC) study for a future electron-positron collider with a center-of-mass energy up to 3 TeV aims for an accelerating gradient of 100 MV/m. The gradient is limited by RF breakdowns, and the luminosity requirements impose a limit on the admissible RF breakdown rate. RF testing of 12 GHz structure prototypes has shown that gradients in excess of 100 MV/m can be reached with the required breakdown rate. However at CLIC, the structures will be operated with significant beam-loading, modifying the field distribution inside. The effect of the beam-loading must be well understood but has not been previously measured. The commissioning and operation of an experiment to measure the effect of beam-loading on breakdown rate and the measurement results are presented.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR032	Effect and Optimisation of Non-Linear Chromatic Aberrations of the CLIC Drive Beam Recombination at CTF3	3852
	D. Gamba, R. Corsini, P.K. Skowroński, F. Tecker CERN, Geneva, Switzerland P. Burrows JAI, Oxford, United Kingdom P. Burrows Oxford University, Physics Department, Oxford, Oxon, United Kingdom
	The CLIC design relies on the two-beam acceleration principle, i.e. the energy transfer from the so called drive beam to the main colliding beams. At the CLIC Test Facility (CTF3) at CERN the feasibility of this principle is being tested in terms of performance and achievable specifications. The high-current drive beam is generated by recombining its parts in a delay loop and a combiner ring. Preserving the drive beam emittance during the recombination process is crucial to ensure beam-current and power production stability. Present theoretical and experimental studies show that non-linear energy dependence of the transverse optics heavily spoils the quality of the recombined beam. Conventionally these effects are cured by means of non-linear corrections using sextupoles. In this work we propose a mitigation of these effects by optimising the linear lattice, leading to a more robust and easy to operate drive beam recombination complex. The latest results are presented.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

MOPMR024

A Versatile Beam Loss Monitoring System for CLIC

286

SUPSS070

use link to see paper's listing under its alternate paper code

M. Kastriotou, S. Döbert, W. Farabolini, E.B. Holzer, E. Nebot Del Busto, F. Tecker
CERN, Geneva, Switzerland
M. Kastriotou, E. Nebot Del Busto, C.P. Welsch
The University of Liverpool, Liverpool, United Kingdom
M. Kastriotou, C.P. Welsch
Cockcroft Institute, Warrington, Cheshire, United Kingdom

The design of a potential CLIC beam loss monitoring (BLM) system presents multiple challenges. To successfully cover the 48 km of beamline, ionisation chambers and optical fibre BLMs are under investigation. The former fulfils all CLIC requirements but would need more than 40000 monitors to protect the whole facility. For the latter, the capability of reconstructing the original loss position with a multi-bunch beam pulse and multiple loss locations still needs to be quantified. Two main sources of background for beam loss measurements are identified for CLIC. The two-beam accelerator scheme introduces so-called crosstalk, i.e. detection of losses originating in one beam line by the monitors protecting the other. Moreover, electrons emitted from the inner surface of RF cavities and boosted by the high RF gradients may produce signals in neighbouring BLMs, limiting their ability to detect real beam losses. This contribution presents the results of dedicated experiments performed in the CLIC Test Facility to quantify the position resolution of optical fibre BLMs in a multi-bunch, multi-loss scenario as well as the sensitivity limitations due to crosstalk and electron field emission.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMB046

Status and Plans for Completion of the Experimental Programme of the Clic Test Facility Ctf3

3347

P.K. Skowroński, R. Corsini, S. Döbert, W. Farabolini, D. Gamba, L. Malina, T. Persson, F. Tecker
CERN, Geneva, Switzerland
W. Farabolini
CEA/DSM/IRFU, France
D. Gamba
JAI, Oxford, United Kingdom

The CLIC Test Facility CTF3 was build, commissioned and operated at CERN by an international collaboration, with the aim of validating the CLIC two beam acceleration scheme, in which the RF power used to accelerate e⁺/e⁻ beams is extracted from a high intensity electron beam. In the past years the main issues of such a scheme were assessed, demonstrating its feasibility. The CTF3 experimental programme is complementing these results by addressing cost and performance subjects, mainly using the CALIFES test beam injector and a full scale two-beam module. In this paper we document the present status and give an outlook to next year run, when the experimental programme should be completed.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR031

Beam-Loading Effect on Breakdown Rate in High-Gradient Accelerating Structures

3848

F. Tecker, T. Argyropoulos, N. Catalán Lasheras, R. Corsini, A. Degiovanni, D. Gamba, J. Giner Navarro, A. Grudiev, G. McMonagle, J.L. Navarro Quirante, R. Rajamaki, E. Senes, I. Syratchev, B.J. Woolley, W. Wuensch
CERN, Geneva, Switzerland
T. Argyropoulos, J. Giner Navarro
IFIC, Valencia, Spain
A. Degiovanni, J.L. Navarro Quirante
ADAM, Geneva, Switzerland
D. Gamba
JAI, Oxford, United Kingdom
R. Rajamaki
Aalto University, School of Science and Technology, Aalto, Finland
E. Senes
Torino University, Torino, Italy
J. Tagg
National Instruments Switzerland, Ennetbaden, Switzerland

The Compact Linear Collider (CLIC) study for a future electron-positron collider with a center-of-mass energy up to 3 TeV aims for an accelerating gradient of 100 MV/m. The gradient is limited by RF breakdowns, and the luminosity requirements impose a limit on the admissible RF breakdown rate. RF testing of 12 GHz structure prototypes has shown that gradients in excess of 100 MV/m can be reached with the required breakdown rate. However at CLIC, the structures will be operated with significant beam-loading, modifying the field distribution inside. The effect of the beam-loading must be well understood but has not been previously measured. The commissioning and operation of an experiment to measure the effect of beam-loading on breakdown rate and the measurement results are presented.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR032

Effect and Optimisation of Non-Linear Chromatic Aberrations of the CLIC Drive Beam Recombination at CTF3

3852

D. Gamba, R. Corsini, P.K. Skowroński, F. Tecker
CERN, Geneva, Switzerland
P. Burrows
JAI, Oxford, United Kingdom
P. Burrows
Oxford University, Physics Department, Oxford, Oxon, United Kingdom

The CLIC design relies on the two-beam acceleration principle, i.e. the energy transfer from the so called drive beam to the main colliding beams. At the CLIC Test Facility (CTF3) at CERN the feasibility of this principle is being tested in terms of performance and achievable specifications. The high-current drive beam is generated by recombining its parts in a delay loop and a combiner ring. Preserving the drive beam emittance during the recombination process is crucial to ensure beam-current and power production stability. Present theoretical and experimental studies show that non-linear energy dependence of the transverse optics heavily spoils the quality of the recombined beam. Conventionally these effects are cured by means of non-linear corrections using sextupoles. In this work we propose a mitigation of these effects by optimising the linear lattice, leading to a more robust and easy to operate drive beam recombination complex. The latest results are presented.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)