IPAC2016 - List of Authors (Pettinacci, V.)

Paper	Title	Page
MOPMB017	Design Issues for the Optical Transition Radiation Screens for theELI-NP Compton Gamma Source	118
	M. Marongiu, A. Giribono, A. Mostacci, V. Pettinacci INFN-Roma, Roma, Italy D. Alesini, E. Chiadroni, F. Cioeta, G. Di Pirro, V.L. Lollo, L. Pellegrino, V. Shpakov, A. Stella, C. Vaccarezza, A. Variola INFN/LNF, Frascati (Roma), Italy A. Cianchi INFN-Roma II, Roma, Italy L. Palumbo University of Rome La Sapienza, Rome, Italy
	A high brightness electron LINAC is being built in the Compton Gamma Source at the ELI Nuclear Physics facility in Romania. To achieve the design luminosity, a train of 32, 16 ns spaced, bunches with a nominal charge of 250 pC will collide with the laser beam in the interaction point. Electron beam spot size is measured with optical transition radiation profile monitors. In order to measure the beam properties along the train, the screens must sustain the thermal stress due to the energy deposited by the bunches; moreover the optical radiation detecting system must have the necessary accuracy and resolution. This paper deals with the analytical studies as well as numerical simulations to investigate the thermal behaviour of the screens impinged by the nominal bunch; the design and the performance of the optical detection line is discussed as well.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMW004	Realization and High Power Tests of Damped C-Band Accelerating Structures for the ELI-NP Linac	399
	D. Alesini, M. Bellaveglia, S. Bini, R. Boni, P. Chimenti, F. Cioeta, R.D. Di Raddo, A. Falone, A. Gallo, V.L. Lollo, L. Palumbo, S. Pioli, A. Variola INFN/LNF, Frascati (Roma), Italy F. Cardelli, M. Magi, A. Mostacci, L. Palumbo, L. Piersanti University of Rome La Sapienza, Rome, Italy F. Cardelli, L. Piersanti INFN-Roma1, Rome, Italy P. Favaron, F. Poletto INFN/LNL, Legnaro (PD), Italy L. Ficcadenti, F. Pellegrino, V. Pettinacci INFN-Roma, Roma, Italy
	The ELI-NP C-Band structures are 1.8 m long travelling wave accelerating structures, quasi-constant gradient, with a field phase advance per cell of 2pi/3. They operate at a repetition rate of 100 Hz and, because of the multi-bunch operation, they have been designed with a dipole HOM damping system to avoid beam break-up (BBU). The structures have symmetric input and output couplers and integrate, in each cell, a waveguide HOM damping systems with silicon carbide RF absorbers. An optimization of the electromagnetic and mechanical design has been done to simplify the fabrication and to reduce their cost. After the first full scale prototype successfully tested at the nominal gradient of 33 MV/m, the production of the twelve structures started. In the paper we illustrate the main design criteria, the realization process and the high power test results.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMW005	Design of Linac with the New Gaskets Clamping Fabrication Technique	403
SUPSS086	use link to see paper's listing under its alternate paper code
	F. Cardelli INFN-Roma1, Rome, Italy D. Alesini INFN/LNF, Frascati (Roma), Italy M. Magi, L. Palumbo University of Rome La Sapienza, Rome, Italy F. Pellegrino, V. Pettinacci INFN-Roma, Roma, Italy
	Recently, a new technique for the realization of high gradient accelerating structures based on the use of gaskets without brazing processes, has been successfully tested at high power on a 1.6 cells RF gun (D. Alesini, et al, PRST 18, 02001, 2015). The new technique developed at the Laboratories of Frascati of the INFN (Italy) in the framework of the SPARC_LAB project has been also adopted for the ELI-NP RF gun. The use of the special gaskets that simultaneously guarantee the vacuum seal and a perfect RF contact allow to avoid the brazing process, strongly reducing the cost, the realization time and the risk of failure. Moreover, without copper annealing due to the brazing process, it is possible, in principle, to decrease the breakdown rate increasing, at the same time, the maximum achievable gradient. The extension of this new fabrication process to complex LINAC structures is the next step on the application of this new technique on particle accelerator. In the paper, we discuss how to extend this process to S-band and C-band Travelling Wave accelerating structures illustrating their electromagnetic design and their mechanical realization.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMY041	Delivery Status of the ELI-NP Gamma Beam System	1635
	S. Tomassini, D. Alesini, A. Battisti, R. Boni, F. Cioeta, A. Delle Piane, E. Di Pasquale, G. Di Pirro, A. Falone, A. Gallo, S.I. Incremona, V.L. Lollo, A. Mostacci, S. Pioli, R. Ricci, U. Rotundo, A. Stella, C. Vaccarezza, A. Vannozzi, A. Variola INFN/LNF, Frascati (Roma), Italy A. Bacci, D.T. Palmer, L. Serafini Istituto Nazionale di Fisica Nucleare, Milano, Italy N. Bliss STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom F. Cardelli INFN-Roma1, Rome, Italy K. Cassou, Z.F. Zomer LAL, Orsay, France G. D'Auria Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy A. Giribono, V. Pettinacci INFN-Roma, Roma, Italy C. Hill STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom L. Palumbo Rome University La Sapienza, Roma, Italy L. Piersanti University of Rome La Sapienza, Rome, Italy
	The ELI-NP GBS is a high intensity and monochromatic gamma source under construction in Magurele (Romania). The design and construction of the Gamma Beam System complex as well as the integration of the technical plants and the commissioning of the overall facility, was awarded to the Eurogammas Consortium in March 2014. The delivery of the facility has been planned in for 4 stages and the first one was fulfilled in October 31st 2015. The engineering aspects related to the delivery stage 1 are presented.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Design Issues for the Optical Transition Radiation Screens for theELI-NP Compton Gamma Source

118

M. Marongiu, A. Giribono, A. Mostacci, V. Pettinacci
INFN-Roma, Roma, Italy
D. Alesini, E. Chiadroni, F. Cioeta, G. Di Pirro, V.L. Lollo, L. Pellegrino, V. Shpakov, A. Stella, C. Vaccarezza, A. Variola
INFN/LNF, Frascati (Roma), Italy
A. Cianchi
INFN-Roma II, Roma, Italy
L. Palumbo
University of Rome La Sapienza, Rome, Italy

A high brightness electron LINAC is being built in the Compton Gamma Source at the ELI Nuclear Physics facility in Romania. To achieve the design luminosity, a train of 32, 16 ns spaced, bunches with a nominal charge of 250 pC will collide with the laser beam in the interaction point. Electron beam spot size is measured with optical transition radiation profile monitors. In order to measure the beam properties along the train, the screens must sustain the thermal stress due to the energy deposited by the bunches; moreover the optical radiation detecting system must have the necessary accuracy and resolution. This paper deals with the analytical studies as well as numerical simulations to investigate the thermal behaviour of the screens impinged by the nominal bunch; the design and the performance of the optical detection line is discussed as well.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMW004

Realization and High Power Tests of Damped C-Band Accelerating Structures for the ELI-NP Linac

399

D. Alesini, M. Bellaveglia, S. Bini, R. Boni, P. Chimenti, F. Cioeta, R.D. Di Raddo, A. Falone, A. Gallo, V.L. Lollo, L. Palumbo, S. Pioli, A. Variola
INFN/LNF, Frascati (Roma), Italy
F. Cardelli, M. Magi, A. Mostacci, L. Palumbo, L. Piersanti
University of Rome La Sapienza, Rome, Italy
F. Cardelli, L. Piersanti
INFN-Roma1, Rome, Italy
P. Favaron, F. Poletto
INFN/LNL, Legnaro (PD), Italy
L. Ficcadenti, F. Pellegrino, V. Pettinacci
INFN-Roma, Roma, Italy

The ELI-NP C-Band structures are 1.8 m long travelling wave accelerating structures, quasi-constant gradient, with a field phase advance per cell of 2pi/3. They operate at a repetition rate of 100 Hz and, because of the multi-bunch operation, they have been designed with a dipole HOM damping system to avoid beam break-up (BBU). The structures have symmetric input and output couplers and integrate, in each cell, a waveguide HOM damping systems with silicon carbide RF absorbers. An optimization of the electromagnetic and mechanical design has been done to simplify the fabrication and to reduce their cost. After the first full scale prototype successfully tested at the nominal gradient of 33 MV/m, the production of the twelve structures started. In the paper we illustrate the main design criteria, the realization process and the high power test results.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

MOPMW005

Design of Linac with the New Gaskets Clamping Fabrication Technique

403

SUPSS086

use link to see paper's listing under its alternate paper code

F. Cardelli
INFN-Roma1, Rome, Italy
D. Alesini
INFN/LNF, Frascati (Roma), Italy
M. Magi, L. Palumbo
University of Rome La Sapienza, Rome, Italy
F. Pellegrino, V. Pettinacci
INFN-Roma, Roma, Italy

Recently, a new technique for the realization of high gradient accelerating structures based on the use of gaskets without brazing processes, has been successfully tested at high power on a 1.6 cells RF gun (D. Alesini, et al, PRST 18, 02001, 2015). The new technique developed at the Laboratories of Frascati of the INFN (Italy) in the framework of the SPARC_LAB project has been also adopted for the ELI-NP RF gun. The use of the special gaskets that simultaneously guarantee the vacuum seal and a perfect RF contact allow to avoid the brazing process, strongly reducing the cost, the realization time and the risk of failure. Moreover, without copper annealing due to the brazing process, it is possible, in principle, to decrease the breakdown rate increasing, at the same time, the maximum achievable gradient. The extension of this new fabrication process to complex LINAC structures is the next step on the application of this new technique on particle accelerator. In the paper, we discuss how to extend this process to S-band and C-band Travelling Wave accelerating structures illustrating their electromagnetic design and their mechanical realization.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMY041

Delivery Status of the ELI-NP Gamma Beam System

1635

S. Tomassini, D. Alesini, A. Battisti, R. Boni, F. Cioeta, A. Delle Piane, E. Di Pasquale, G. Di Pirro, A. Falone, A. Gallo, S.I. Incremona, V.L. Lollo, A. Mostacci, S. Pioli, R. Ricci, U. Rotundo, A. Stella, C. Vaccarezza, A. Vannozzi, A. Variola
INFN/LNF, Frascati (Roma), Italy
A. Bacci, D.T. Palmer, L. Serafini
Istituto Nazionale di Fisica Nucleare, Milano, Italy
N. Bliss
STFC/DL, Daresbury, Warrington, Cheshire, United Kingdom
F. Cardelli
INFN-Roma1, Rome, Italy
K. Cassou, Z.F. Zomer
LAL, Orsay, France
G. D'Auria
Elettra-Sincrotrone Trieste S.C.p.A., Basovizza, Italy
A. Giribono, V. Pettinacci
INFN-Roma, Roma, Italy
C. Hill
STFC/DL/ASTeC, Daresbury, Warrington, Cheshire, United Kingdom
L. Palumbo
Rome University La Sapienza, Roma, Italy
L. Piersanti
University of Rome La Sapienza, Rome, Italy

The ELI-NP GBS is a high intensity and monochromatic gamma source under construction in Magurele (Romania). The design and construction of the Gamma Beam System complex as well as the integration of the technical plants and the commissioning of the overall facility, was awarded to the Eurogammas Consortium in March 2014. The delivery of the facility has been planned in for 4 stages and the first one was fulfilled in October 31st 2015. The engineering aspects related to the delivery stage 1 are presented.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)