IPAC2016 - List of Authors (Papaphilippou, Y.)

Paper	Title	Page
TUPMW002	LHC Luminosity Modeling for RUNII	1403
	F. Antoniou, G. Arduini, M. Hostettler, M. Lamont, S. Papadopoulou, Y. Papaphilippou, G. Papotti, M. Pojer, B. Salvachua, M. Wyszynski CERN, Geneva, Switzerland
	Funding: Research supported by the High Luminosity LHC project After a long shut-down (LS1), LHC restarted its operation on April 2015 at a record energy of 6.5TeV, achieving soon a good luminosity performance. In this paper, a luminosity model based on the three main components of the LHC luminosity degradation (intrabeam scattering, synchrotron radiation and luminosity burn-off), is compared with data from runII. Based on the observations, other sources of luminosity degradation are discussed and the model is refined. Finally, based on the experience from runI and runII, the model is used for integrated luminosity projections for the HL-LHC beam parameters.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMW022	Modelling and Measurements of Bunch Profiles at the LHC Flat Bottom	1477
SUPSS004	use link to see paper's listing under its alternate paper code
	S. Papadopoulou, F. Antoniou, J.E. Muller, Y. Papaphilippou, G. Trad CERN, Geneva, Switzerland
	At the LHC flat bottom the interplay between a series of effects (i.e. intrabeam scattering, longitudinal beam manipulations, non-linearities of the machine, etc) can lead to a population of the tails of the beam distributions, which may become non-Gaussian. This paper presents observations of the evolution of particle distributions in the LHC flat bottom. Novel distribution functions are employed to represent the beam profiles, and used as a guideline for generalising emittance growth rate estimations due to IBS. Finally, an attempt is made to benchmark an IBS Monte-Carlo simulation code, able to track 3D particle distributions, with the measured beam profile evolutions.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOR017	Beam-beam Simulation of Crab Cavity with Frequence Dependent Noise for LHC Upgrade	1691
	J. Qiang LBNL, Berkeley, California, USA G. Arduini, Y. Papaphilippou, T. Pieloni CERN, Geneva, Switzerland J. Barranco EPFL, Lausanne, Switzerland
	High luminosity LHC upgrade will improve the luminosity of the current LHC operation by an order of magnitude. Crab cavity as a critical component for compensating luminosity loss from large crossing angle collision and also providing luminosity leveling for the LHC upgrade is being actively pursued. In this paper, we will report on the study of potential effects of the frequence-dependent crab cavity noise on the beam luminosity lifetime using strong-strong beam-beam simulations.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMW002	A CLIC Damping Wiggler Prototype at ANKA: Commissioning and Preparations for a Beam Dynamics Experimental Program	2412
	A. Bernhard, S. Casalbuoni, S. Gerstl, J. Gethmann, A.W. Grau, E. Huttel, A.-S. Müller, D. Saez de Jauregui, N.J. Smale KIT, Eggenstein-Leopoldshafen, Germany A.V. Bragin, S.V. Khrushchev, N.A. Mezentsev, V.A. Shkaruba, V.M. Tsukanov, K. Zolotarev BINP SB RAS, Novosibirsk, Russia P. Ferracin, L. Garcia Fajardo, Y. Papaphilippou, H. Schmickler, D. Schoerling, P. Zisopoulos CERN, Geneva, Switzerland
	Funding: This work is partially funded by the German Federal Ministry of Education and Research under grant 05K12VK1 In a collaboration between CERN, BINP and KIT a prototype of a superconducting damping wiggler for the CLIC damping rings has been installed at the ANKA synchrotron light source. On the one hand, the foreseen experimental program aims at validating the technical design of the wiggler, particularly the conduction cooling concept applied in its cryostat design, in a long-term study. On the other hand, the wiggler's influence on the beam dynamics particularly in the presence of collective effects is planned to be investigated. ANKA's low-alpha short-bunch operation mode will serve as a model system for these studies on collective effects. To simulate these effects and to make verifiable predictions an accurate model of the ANKA storage ring in low-alpha mode, including the insertion devices is under parallel development. This contribution reports on the first operational experience with the CLIC damping wiggler prototype in the ANKA storage ring and steps towards the planned advanced experimental program with this device.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMW003	NONLINEAR OPTIMIZATION OF CLIC DRS NEW DESIGN WITH VARIABLE BENDS AND HIGH FIELD WIGGLERS	2416
	H. Ghasem, J. Alabau-Gonzalvo, F. Antoniou, S. Papadopoulou, Y. Papaphilippou CERN, Geneva, Switzerland
	The new design of CLIC damping rings is based on longitudinal variable bends and high field superconducting wiggler magnets. It provides an ultra-low horizontal normalised emittance of 412 nm-rad at 2.86 GeV. In this paper, nonlinear beam dynamics of the new design of the damping ring (DR) with trapezium field profile bending magnets have been investigated in detail. Effects of the misalignment errors have been studied in the closed orbit and dynamic aperture.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMR041	Implementation of High Order Symplectic Integrators with Positive Steps in Tracking Programs	3484
	K. Skoufaris, Y. Papaphilippou CERN, Geneva, Switzerland J. Laskar IMCCE, Paris, France Ch. Skokos University of Cape Town, Cape Town, South Africa
	The symplectic integrators CSABAν & CSBABν are used in order to calculate single particles dynamics in accelerators and storage rings. These integrators present only positive steps and can be accurate up to the high order. They are compared with already existing splitting methods of MAD-X with respect to their impact on various beam dynamics quantities, for different beam elements.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMR042	Design Guidelines for the Injector Complex of the FCC-ee	3488
	Y. Papaphilippou, F. Zimmermann CERN, Geneva, Switzerland M. Aiba PSI, Villigen PSI, Switzerland K. Oide KEK, Ibaraki, Japan L. Rinolfi JUAS, Archamps, France D.B. Shwartz BINP SB RAS, Novosibirsk, Russia
	The design of the injector of the FCC-ee, a high-luminosity e⁺/e⁻ circular collider of 100 km in the Geneva area, is driven by the required particle flux for ring filling or top-up and for a variety of energies, from 45.5 to 175 GeV. In this paper, a set of parameters of the injector complex is presented, fulfilling the collider needs for all running scenarios. In particular, the challenges of the booster ring design are detailed, focusing on issues of optics, layout, low bending fields, injection schemes to the collider for maximizing transfer efficiency and synchrotron radiation handling.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR022	Design of Beam Optics for the FCC-ee Collider Ring	3821
	K. Oide, K. Ohmi, D. Zhou KEK, Ibaraki, Japan M. Aiba PSI, Villigen PSI, Switzerland S. Aumon, M. Benedikt, H. Burkhardt, A. Doblhammer, B. Härer, B.J. Holzer, J.M. Jowett, M. Koratzinos, L.E. Medina Medrano, Y. Papaphilippou, J. Wenninger, F. Zimmermann CERN, Geneva, Switzerland A.P. Blondel DPNC, Genève, Switzerland A.V. Bogomyagkov, I. Koop, E.B. Levichev, P.A. Piminov, D.N. Shatilov, D.B. Shwartz, S.V. Sinyatkin BINP SB RAS, Novosibirsk, Russia M. Boscolo INFN/LNF, Frascati (Roma), Italy Y. Cai, M.K. Sullivan, U. Wienands SLAC, Menlo Park, California, USA
	A design of beam optics will be presented for the FCC-ee double-ring collider. The main characteristics are 45 to 175 GeV beam energy, 100 km circumference with two IPs/ring, 30 mrad crossing angle at the IP, crab-waist scheme with local chromaticity correction system, and "tapering" of the magnets along with the local beam energy. An asymmetric layout near the interaction region suppresses the critical energy of synchrotron radiation toward the detector at the IP less than 100 keV, while keeping the geometry as close as to the FCC-hh beam line. A sufficient transverse/longitudinal dynamic aperture is obtained to assure the lifetime with beamstrahlung and top-up injection. The synchrotron radiation in all magnets, the IP solenoid and its compensation, nonlinearity of the final quadrupoles are taken into account.
Export •	reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

LHC Luminosity Modeling for RUNII

1403

F. Antoniou, G. Arduini, M. Hostettler, M. Lamont, S. Papadopoulou, Y. Papaphilippou, G. Papotti, M. Pojer, B. Salvachua, M. Wyszynski
CERN, Geneva, Switzerland

Funding: Research supported by the High Luminosity LHC project
After a long shut-down (LS1), LHC restarted its operation on April 2015 at a record energy of 6.5TeV, achieving soon a good luminosity performance. In this paper, a luminosity model based on the three main components of the LHC luminosity degradation (intrabeam scattering, synchrotron radiation and luminosity burn-off), is compared with data from runII. Based on the observations, other sources of luminosity degradation are discussed and the model is refined. Finally, based on the experience from runI and runII, the model is used for integrated luminosity projections for the HL-LHC beam parameters.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPMW022

Modelling and Measurements of Bunch Profiles at the LHC Flat Bottom

1477

SUPSS004

use link to see paper's listing under its alternate paper code

S. Papadopoulou, F. Antoniou, J.E. Muller, Y. Papaphilippou, G. Trad
CERN, Geneva, Switzerland

At the LHC flat bottom the interplay between a series of effects (i.e. intrabeam scattering, longitudinal beam manipulations, non-linearities of the machine, etc) can lead to a population of the tails of the beam distributions, which may become non-Gaussian. This paper presents observations of the evolution of particle distributions in the LHC flat bottom. Novel distribution functions are employed to represent the beam profiles, and used as a guideline for generalising emittance growth rate estimations due to IBS. Finally, an attempt is made to benchmark an IBS Monte-Carlo simulation code, able to track 3D particle distributions, with the measured beam profile evolutions.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPOR017

Beam-beam Simulation of Crab Cavity with Frequence Dependent Noise for LHC Upgrade

1691

J. Qiang
LBNL, Berkeley, California, USA
G. Arduini, Y. Papaphilippou, T. Pieloni
CERN, Geneva, Switzerland
J. Barranco
EPFL, Lausanne, Switzerland

High luminosity LHC upgrade will improve the luminosity of the current LHC operation by an order of magnitude. Crab cavity as a critical component for compensating luminosity loss from large crossing angle collision and also providing luminosity leveling for the LHC upgrade is being actively pursued. In this paper, we will report on the study of potential effects of the frequence-dependent crab cavity noise on the beam luminosity lifetime using strong-strong beam-beam simulations.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMW002

A CLIC Damping Wiggler Prototype at ANKA: Commissioning and Preparations for a Beam Dynamics Experimental Program

2412

A. Bernhard, S. Casalbuoni, S. Gerstl, J. Gethmann, A.W. Grau, E. Huttel, A.-S. Müller, D. Saez de Jauregui, N.J. Smale
KIT, Eggenstein-Leopoldshafen, Germany
A.V. Bragin, S.V. Khrushchev, N.A. Mezentsev, V.A. Shkaruba, V.M. Tsukanov, K. Zolotarev
BINP SB RAS, Novosibirsk, Russia
P. Ferracin, L. Garcia Fajardo, Y. Papaphilippou, H. Schmickler, D. Schoerling, P. Zisopoulos
CERN, Geneva, Switzerland

Funding: This work is partially funded by the German Federal Ministry of Education and Research under grant 05K12VK1
In a collaboration between CERN, BINP and KIT a prototype of a superconducting damping wiggler for the CLIC damping rings has been installed at the ANKA synchrotron light source. On the one hand, the foreseen experimental program aims at validating the technical design of the wiggler, particularly the conduction cooling concept applied in its cryostat design, in a long-term study. On the other hand, the wiggler's influence on the beam dynamics particularly in the presence of collective effects is planned to be investigated. ANKA's low-alpha short-bunch operation mode will serve as a model system for these studies on collective effects. To simulate these effects and to make verifiable predictions an accurate model of the ANKA storage ring in low-alpha mode, including the insertion devices is under parallel development. This contribution reports on the first operational experience with the CLIC damping wiggler prototype in the ANKA storage ring and steps towards the planned advanced experimental program with this device.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPMW003

NONLINEAR OPTIMIZATION OF CLIC DRS NEW DESIGN WITH VARIABLE BENDS AND HIGH FIELD WIGGLERS

2416

H. Ghasem, J. Alabau-Gonzalvo, F. Antoniou, S. Papadopoulou, Y. Papaphilippou
CERN, Geneva, Switzerland

The new design of CLIC damping rings is based on longitudinal variable bends and high field superconducting wiggler magnets. It provides an ultra-low horizontal normalised emittance of 412 nm-rad at 2.86 GeV. In this paper, nonlinear beam dynamics of the new design of the damping ring (DR) with trapezium field profile bending magnets have been investigated in detail. Effects of the misalignment errors have been studied in the closed orbit and dynamic aperture.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMR041

Implementation of High Order Symplectic Integrators with Positive Steps in Tracking Programs

3484

K. Skoufaris, Y. Papaphilippou
CERN, Geneva, Switzerland
J. Laskar
IMCCE, Paris, France
Ch. Skokos
University of Cape Town, Cape Town, South Africa

The symplectic integrators CSABAν & CSBABν are used in order to calculate single particles dynamics in accelerators and storage rings. These integrators present only positive steps and can be accurate up to the high order. They are compared with already existing splitting methods of MAD-X with respect to their impact on various beam dynamics quantities, for different beam elements.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPMR042

Design Guidelines for the Injector Complex of the FCC-ee

3488

Y. Papaphilippou, F. Zimmermann
CERN, Geneva, Switzerland
M. Aiba
PSI, Villigen PSI, Switzerland
K. Oide
KEK, Ibaraki, Japan
L. Rinolfi
JUAS, Archamps, France
D.B. Shwartz
BINP SB RAS, Novosibirsk, Russia

The design of the injector of the FCC-ee, a high-luminosity e⁺/e⁻ circular collider of 100 km in the Geneva area, is driven by the required particle flux for ring filling or top-up and for a variety of energies, from 45.5 to 175 GeV. In this paper, a set of parameters of the injector complex is presented, fulfilling the collider needs for all running scenarios. In particular, the challenges of the booster ring design are detailed, focusing on issues of optics, layout, low bending fields, injection schemes to the collider for maximizing transfer efficiency and synchrotron radiation handling.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

THPOR022

Design of Beam Optics for the FCC-ee Collider Ring

3821

K. Oide, K. Ohmi, D. Zhou
KEK, Ibaraki, Japan
M. Aiba
PSI, Villigen PSI, Switzerland
S. Aumon, M. Benedikt, H. Burkhardt, A. Doblhammer, B. Härer, B.J. Holzer, J.M. Jowett, M. Koratzinos, L.E. Medina Medrano, Y. Papaphilippou, J. Wenninger, F. Zimmermann
CERN, Geneva, Switzerland
A.P. Blondel
DPNC, Genève, Switzerland
A.V. Bogomyagkov, I. Koop, E.B. Levichev, P.A. Piminov, D.N. Shatilov, D.B. Shwartz, S.V. Sinyatkin
BINP SB RAS, Novosibirsk, Russia
M. Boscolo
INFN/LNF, Frascati (Roma), Italy
Y. Cai, M.K. Sullivan, U. Wienands
SLAC, Menlo Park, California, USA

A design of beam optics will be presented for the FCC-ee double-ring collider. The main characteristics are 45 to 175 GeV beam energy, 100 km circumference with two IPs/ring, 30 mrad crossing angle at the IP, crab-waist scheme with local chromaticity correction system, and "tapering" of the magnets along with the local beam energy. An asymmetric layout near the interaction region suppresses the critical energy of synchrotron radiation toward the detector at the IP less than 100 keV, while keeping the geometry as close as to the FCC-hh beam line. A sufficient transverse/longitudinal dynamic aperture is obtained to assure the lifetime with beamstrahlung and top-up injection. The synchrotron radiation in all magnets, the IP solenoid and its compensation, nonlinearity of the final quadrupoles are taken into account.

Export •

reference for this paper to ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)