Monteiro, P.

Paper	Title	Page
MOC003	SOLEIL Control and Acquisition Hardware Installation and Maintenance Management	19
	P. Betinelli, M. Abdelbaki, Y.-M. Abiven, J. Bisou, F. Blache, D. Corruble, P. Monteiro, G. Renaud, J. P. Ricaud SOLEIL, Gif-sur-Yvette
	SOLEIL is a third generation Synchrotron radiation source located in France near Paris. The construction began in 2002. Now, the Storage Ring delivers photon beam to 20 beamlines with global reliability better than 95%. In a few years, we have installed and deployed many hardware equipments: 145 CPCI systems, 175 PLC systems, 154 Motion Systems. Around 6000 cables are connected to our hardware equipments. We are distributing around 600 timing signals, driving more than 760 motors, and piloting more than 500 IO CPCI boards. To achieve the high reliability required, we have applied industrial installation and maintenance methods. From the beginning we have defined standard products and connexions, installation procedures, PV forms… Configurations, Cabling Folders and PV forms are saved in an EDMS (Engineering document management system). We use a CMMS (computerized maintenance management system) to inventory, localize and keep the history of the installed equipments. Each intervention is reported in it to follow the demands of evolutions, the maintenance, the problems and interventions. The result of this organization is a control and acquisition hardware's availability of 99,98%.
	Slides
WEP089	Machine Protection and Interlock Systems at Synchrotron SOLEIL	576
	Y.-M. Abiven, J. Coquet, X. Deletoille, F. Dohou, P. Monteiro, R. P. Patrick SOLEIL, Gif-sur-Yvette
	SOLEIL is a third generation Synchrotron radiation source located in France near Paris, having the classical accelerator structure consisting of a Linac pre-accelerator, a Booster accelerator and a Storage Ring, which are connected by two transfer lines. Since 2006, the Storage Ring delivers photon beam to beamlines. In order to protect the very sensitive and essential equipment during machine operation, (vacuum chambers, vacuum valves, mirrors, etc.) an interlock system has been implemented. This system is based on industrial and autonomous PLC (Programmable Logic Controller). Interlock system and subsystems are based on Siemens PLCs S7-300 family products, which are standard hardware components of SOLEIL Control Systems. Surrounding the booster and the 354 meters of the storage ring, 87 PLCs configurations are installed with 50 for vacuum security, 19 for diagnostics subsystem security and 18 for the interlock system. PLC cycle time ensures a signal between detection and RF interlock generation around 30 and 50 ms.