IBIC2019 - List of Keywords (alignment)

Paper	Title	Other Keywords	Page
TUPP027	Development of a Precision Pepper-Pot Emittance Meter	emittance, heavy-ion, beam-transport, background	369
	G. Hahn PAL, Pohang, Republic of Korea J.G. Hwang HZB, Berlin, Germany
	A fast single-shot emittance measurement device, a pepper-pot emittance meter, was developed. In the manufacturing stage, in order to guarantee the quality of the holes in the pepper-pot mask, we fabricated two mask using different methods that are made of phosphor bronze by optical lithography process and SUS by laser cutting. After the comparison of each SEM (Scanning Electron Microscope) measurement data, the phosphor bronze mask fabricated by lithography was found to be suitable. The rotation and translation matrices are applied on all images obtained by the camera to mitigate the relative angular misalignment errors between MCP, mirror and CMOS camera with respect to the mask. By applying the instrument in the NFRI ion source, the four-dimensional phase-space distribution of ion beams is retrieved and compared with the result measured by using a slit-scan method. In this paper, we describe the fabrication process, data analysis method and beam measurement results of the developed emittance meter.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-TUPP027
About •	paper received ※ 09 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPP044	Multiple Synchrotron Light Monitors for Transverse Matching and Monitoring at CEBAF	emittance, synchrotron, quadrupole, monitoring	439
	B.G. Freeman, J. Gubeli, M.G. Tiefenback JLab, Newport News, Virginia, USA
	Funding: DOE Contract No. DE-AC05-06OR23177 Beam setup at the Continuous Electron Beam Accelerator Facility (CEBAF) involves threading beam through the machine, monitoring global transfer functions to identify and address cumulative lattice errors. Transverse beam emittance may grow by as much as two orders of magnitude, mediated by synchrotron radiation. Re-matching the enlarged beam phase space into successive re-circulation arcs minimizes this emittance growth but requires knowledge of the actual beam distribution. This is now accomplished through quadrupole scans using wire profile monitors, the most time-consuming activity in our setup process. We propose to use Synchrotron Light Monitors (SLMs) to image the beam at homologous points in the four super-period recirculation arc lattices. Benefits include real-time monitoring of beam parameters and reduced elapsed time for initial setup. These SLMs will be installed in Arc 7 of the CEBAF machine, where Synchrotron Radiation contributes moderately to emittance growth. One of four required SLMs will be installed and commissioned this year, with the rest being installed next year.
	Poster TUPP044 [0.170 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-TUPP044
About •	paper received ※ 04 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WECO04	Commissioning of the Non-invasive Profile Monitors for the ESS LEBT	LEBT, emittance, MMI, solenoid	495
	C.A. Thomas, J. Etxeberria, S. Haghtalab, H. Kocevar, N. Milas, R. Miyamoto, T.J. Shea, R. Tarkeshian ESS, Lund, Sweden
	In the Low Energy Beam Transport (LEBT) of the European Spallation Source (ESS) Linac, a specific Non-invasive Profile Monitor (NPM) has been designed to primarily monitor beam position monitor with 100 µm accuracy, and in addition enable beam profile and size measurement. We present the first measurement results using NPM during the commissioning of the LEBT. The measurement results conclude the beam position as well as the angle of the beam. The performance of the measurement is discussed and compared to the required accuracy for the position measurement. In addition, the profile of the beam along the propagation axis is reported, as measured for part or the full pulse transported in the LEBT. The fidelity of the reported profile will be discussed as function of the system sensitivity and image signal to noise ratio.
	Slides WECO04 [11.779 MB]
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WECO04
About •	paper received ※ 04 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP032	Beam Based Alignment of Elements and Source at the ESS Low Energy Beam Transport Line	solenoid, LEBT, simulation, MMI	600
	N. Milas, M. Eshraqi, B. Gålander, Y. Levinsen, R. Miyamoto, E. Nilsson, D.C. Plostinar ESS, Lund, Sweden
	The European Spallation Source (ESS), currently under construction in Lund, Sweden, will be the world’s most powerful linear accelerator driving a neutron spallation source, with an average power of 5 MW at 2.0 GeV. The first protons were accelerated at the ESS site during the commissioning of the ion source and low energy beam transport (LEBT), that started in September 2018 and ran until July 2019. Misalignments of the elements in the LEBT can have a strong impact on the final current transmission of the low energy part. In this paper, we present a way to isolate and measure tilts of the elements and the initial centroid divergence of the source. We also present initial test measurements for the ESS LEBT and discuss how to extend the method to other facilities.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP032
About •	paper received ※ 04 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP033	Position Based Phase Scan	cavity, MEBT, focusing, quadrupole	605
	N. Milas, M. Eshraqi, Y. Levinsen, R. Miyamoto, D.C. Plostinar ESS, Lund, Sweden Y. Liu KEK/JAEA, Ibaraki-Ken, Japan
	Knowledge of the longitudinal beam parameters is important for understanding beam dynamics in linacs. As well as with transverse optics, the settings for the RF cavities have to be established and phase and amplitude seen by the beam must be determined in order to guarantee a stable motion in the longitudinal plane. This work presents an extension of the most widely used phase scan method, relying on time-of-flight, using only transverse positions measured at a few selected BPMs downstream of the cavity being scanned. In principle, the method can be applied both to normal conducting and SC. The suggested method is fast and relatively simple and is capable to provide the values for the cavity transverse misalignment (offsets and tilts) at the same time. It can be a useful part of the initial longitudinal beam tuning.
DOI •	reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP033
About •	paper received ※ 04 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Other Keywords

Page

TUPP027

Development of a Precision Pepper-Pot Emittance Meter

emittance, heavy-ion, beam-transport, background

369

G. Hahn
PAL, Pohang, Republic of Korea
J.G. Hwang
HZB, Berlin, Germany

A fast single-shot emittance measurement device, a pepper-pot emittance meter, was developed. In the manufacturing stage, in order to guarantee the quality of the holes in the pepper-pot mask, we fabricated two mask using different methods that are made of phosphor bronze by optical lithography process and SUS by laser cutting. After the comparison of each SEM (Scanning Electron Microscope) measurement data, the phosphor bronze mask fabricated by lithography was found to be suitable. The rotation and translation matrices are applied on all images obtained by the camera to mitigate the relative angular misalignment errors between MCP, mirror and CMOS camera with respect to the mask. By applying the instrument in the NFRI ion source, the four-dimensional phase-space distribution of ion beams is retrieved and compared with the result measured by using a slit-scan method. In this paper, we describe the fabrication process, data analysis method and beam measurement results of the developed emittance meter.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-TUPP027

About •

paper received ※ 09 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

TUPP044

Multiple Synchrotron Light Monitors for Transverse Matching and Monitoring at CEBAF

emittance, synchrotron, quadrupole, monitoring

439

B.G. Freeman, J. Gubeli, M.G. Tiefenback
JLab, Newport News, Virginia, USA

Funding: DOE Contract No. DE-AC05-06OR23177
Beam setup at the Continuous Electron Beam Accelerator Facility (CEBAF) involves threading beam through the machine, monitoring global transfer functions to identify and address cumulative lattice errors. Transverse beam emittance may grow by as much as two orders of magnitude, mediated by synchrotron radiation. Re-matching the enlarged beam phase space into successive re-circulation arcs minimizes this emittance growth but requires knowledge of the actual beam distribution. This is now accomplished through quadrupole scans using wire profile monitors, the most time-consuming activity in our setup process. We propose to use Synchrotron Light Monitors (SLMs) to image the beam at homologous points in the four super-period recirculation arc lattices. Benefits include real-time monitoring of beam parameters and reduced elapsed time for initial setup. These SLMs will be installed in Arc 7 of the CEBAF machine, where Synchrotron Radiation contributes moderately to emittance growth. One of four required SLMs will be installed and commissioned this year, with the rest being installed next year.

Poster TUPP044 [0.170 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-TUPP044

About •

paper received ※ 04 September 2019 paper accepted ※ 08 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WECO04

Commissioning of the Non-invasive Profile Monitors for the ESS LEBT

LEBT, emittance, MMI, solenoid

495

C.A. Thomas, J. Etxeberria, S. Haghtalab, H. Kocevar, N. Milas, R. Miyamoto, T.J. Shea, R. Tarkeshian
ESS, Lund, Sweden

In the Low Energy Beam Transport (LEBT) of the European Spallation Source (ESS) Linac, a specific Non-invasive Profile Monitor (NPM) has been designed to primarily monitor beam position monitor with 100 µm accuracy, and in addition enable beam profile and size measurement. We present the first measurement results using NPM during the commissioning of the LEBT. The measurement results conclude the beam position as well as the angle of the beam. The performance of the measurement is discussed and compared to the required accuracy for the position measurement. In addition, the profile of the beam along the propagation axis is reported, as measured for part or the full pulse transported in the LEBT. The fidelity of the reported profile will be discussed as function of the system sensitivity and image signal to noise ratio.

Slides WECO04 [11.779 MB]

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WECO04

About •

paper received ※ 04 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP032

Beam Based Alignment of Elements and Source at the ESS Low Energy Beam Transport Line

solenoid, LEBT, simulation, MMI

600

N. Milas, M. Eshraqi, B. Gålander, Y. Levinsen, R. Miyamoto, E. Nilsson, D.C. Plostinar
ESS, Lund, Sweden

The European Spallation Source (ESS), currently under construction in Lund, Sweden, will be the world’s most powerful linear accelerator driving a neutron spallation source, with an average power of 5 MW at 2.0 GeV. The first protons were accelerated at the ESS site during the commissioning of the ion source and low energy beam transport (LEBT), that started in September 2018 and ran until July 2019. Misalignments of the elements in the LEBT can have a strong impact on the final current transmission of the low energy part. In this paper, we present a way to isolate and measure tilts of the elements and the initial centroid divergence of the source. We also present initial test measurements for the ESS LEBT and discuss how to extend the method to other facilities.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP032

About •

paper received ※ 04 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPP033

Position Based Phase Scan

cavity, MEBT, focusing, quadrupole

605

N. Milas, M. Eshraqi, Y. Levinsen, R. Miyamoto, D.C. Plostinar
ESS, Lund, Sweden
Y. Liu
KEK/JAEA, Ibaraki-Ken, Japan

Knowledge of the longitudinal beam parameters is important for understanding beam dynamics in linacs. As well as with transverse optics, the settings for the RF cavities have to be established and phase and amplitude seen by the beam must be determined in order to guarantee a stable motion in the longitudinal plane. This work presents an extension of the most widely used phase scan method, relying on time-of-flight, using only transverse positions measured at a few selected BPMs downstream of the cavity being scanned. In principle, the method can be applied both to normal conducting and SC. The suggested method is fast and relatively simple and is capable to provide the values for the cavity transverse misalignment (offsets and tilts) at the same time. It can be a useful part of the initial longitudinal beam tuning.

DOI •

reference for this paper ※ https://doi.org/10.18429/JACoW-IBIC2019-WEPP033

About •

paper received ※ 04 September 2019 paper accepted ※ 10 September 2019 issue date ※ 10 November 2019

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)