IBIC2016 - List of Authors (Stulle, F.)

Paper	Title	Page
MOPG35	Single Pulse Sub-Picocoulomb Charge Measured by a Turbo-ICT in a Laser Plasma Accelerator	119
	F. Stulle, J.F. Bergoz BERGOZ Instrumentation, Saint Genis Pouilly, France W. Leemans, K. Nakamura LBNL, Berkeley, California, USA
	Funding: The work by the BELLA Center scientists and staff was supported by Office of Science, Office of HEP, US DOE under Contract DE-AC02-05CH11231 and the National Science Foundation. Experiments at the Berkeley Lab Laser Accelerator (BELLA) verified that the Turbo-ICT allows high resolution charge measurements even in the presence of strong background signals. For comparison, a Turbo-ICT and a conventional ICT were installed on the BELLA petawatt beamline, both sharing the same vacuum flanges. We report on measurements performed using a gas-jet and a capillary-discharge based laser plasma accelerator. In both setups the Turbo-ICT was able to resolve sub-picocoulomb charges.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-MOPG35
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPG41	Measurement of Coupling Impedances using a Goubau Line	719
	F. Stulle, J.F. Bergoz BERGOZ Instrumentation, Saint Genis Pouilly, France H.-W. Glock HZB, Berlin, Germany
	Longitudinal coupling impedances can be deduced from S-Parameter measurements performed on a Goubau Line. The Goubau Line, also known as single wire line, is a variant of the coaxial wire method. Both setups use a wire for mimicking the particle beam. Coaxial tapers at the wire ends adapt wave impedance to the 50ohm impedance of coaxial cables, sources and receivers. But for guiding the electromagnetic wave, the Goubau Line relies on the realistic boundary conditions imposed by an insulated wire instead of using a coaxial shield. Equations for the deduction of longitudinal coupling impedances are reviewed and applied to Goubau Line measurements. Goubau Line measurements and CST Studio simulations are compared, showing good agreement.
DOI •	reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-WEPG41
Export •	reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

Paper

Title

Page

Single Pulse Sub-Picocoulomb Charge Measured by a Turbo-ICT in a Laser Plasma Accelerator

119

F. Stulle, J.F. Bergoz
BERGOZ Instrumentation, Saint Genis Pouilly, France
W. Leemans, K. Nakamura
LBNL, Berkeley, California, USA

Funding: The work by the BELLA Center scientists and staff was supported by Office of Science, Office of HEP, US DOE under Contract DE-AC02-05CH11231 and the National Science Foundation.
Experiments at the Berkeley Lab Laser Accelerator (BELLA) verified that the Turbo-ICT allows high resolution charge measurements even in the presence of strong background signals. For comparison, a Turbo-ICT and a conventional ICT were installed on the BELLA petawatt beamline, both sharing the same vacuum flanges. We report on measurements performed using a gas-jet and a capillary-discharge based laser plasma accelerator. In both setups the Turbo-ICT was able to resolve sub-picocoulomb charges.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-MOPG35

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)

WEPG41

Measurement of Coupling Impedances using a Goubau Line

719

F. Stulle, J.F. Bergoz
BERGOZ Instrumentation, Saint Genis Pouilly, France
H.-W. Glock
HZB, Berlin, Germany

Longitudinal coupling impedances can be deduced from S-Parameter measurements performed on a Goubau Line. The Goubau Line, also known as single wire line, is a variant of the coaxial wire method. Both setups use a wire for mimicking the particle beam. Coaxial tapers at the wire ends adapt wave impedance to the 50ohm impedance of coaxial cables, sources and receivers. But for guiding the electromagnetic wave, the Goubau Line relies on the realistic boundary conditions imposed by an insulated wire instead of using a coaxial shield. Equations for the deduction of longitudinal coupling impedances are reviewed and applied to Goubau Line measurements. Goubau Line measurements and CST Studio simulations are compared, showing good agreement.

DOI •

reference for this paper ※ DOI:10.18429/JACoW-IBIC2016-WEPG41

Export •

reference for this paper using ※ BibTeX, ※ LaTeX, ※ Text/Word, ※ RIS, ※ EndNote (xml)