| Paper |
Title |
Other Keywords |
Page |
| TUPAB04 |
Overall Design of the CEPC Injector LINAC |
linac, positron, electron, emittance |
139 |
| |
- J.R. Zhang, Y.L. Chi, J. Gao, X.P. Li, C. Meng, G. Pei, S. Pei, D. Wang, C.H. Yu
IHEP, Beijing, People’s Republic of China
|
|
| |
The CEPC injector consists of linac and booster. To meet the requirement of the booster, the linac should provide 10 GeV electron and positron beam at a repetition frequency of 100 Hz. In this paper, the overall design of the linac has introduced. For the linac one-bunch-per-pulse is adopted and bunch charge should be larger than 3 nC in the design. A 1.1 GeV damping ring with 75.4 m circumference has adopted to reduce the transverse emittance of positron beam to suitably small value.
|
|
| DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-eeFACT2018-TUPAB04
|
|
| About • |
paper received ※ 26 September 2018 paper accepted ※ 19 February 2019 issue date ※ 21 April 2019 |
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |
| TUPAB05 |
An On-axis Injection Design for CEPC |
injection, booster, collider, dynamic-aperture |
143 |
| |
- X. Cui, C.H. Yu, J.Y. Zhai, Y. Zhang
IHEP, Beijing, People’s Republic of China
|
|
| |
Considering the requirement on the dynamic aperture in the main collider, an on-axis injection method is need-ed for the Higgs energy at CEPC. A swap-out on-axis injection scheme using the booster as an accumulation ring is given in this paper. Some dynamical problems concerning the effectiveness of this injection scheme is also discussed.
|
|
| DOI • |
reference for this paper
※ https://doi.org/10.18429/JACoW-eeFACT2018-TUPAB05
|
|
| About • |
paper received ※ 27 September 2018 paper accepted ※ 19 February 2019 issue date ※ 21 April 2019 |
|
| Export • |
reference for this paper using
※ BibTeX,
※ LaTeX,
※ Text/Word,
※ RIS,
※ EndNote (xml)
|
|
| |