SRF2013 - List of Authors (Liu, Z.C.)

Paper

Title

Page

Preliminary Design of CEPC RF Superconducting System

140

H.J. Zheng, J. Gao, S. Jin, Y. Liu, Z.C. Liu, J.Y. Zhai, T.X. Zhao
IHEP, Beijing, People's Republic of China

In order to study Higgs Boson, scientists proposed to construct a Higgs factory. Chinese scientists are also actively involved in research of the construction of Higgs factory. Construction of a circular collider and several construction solutions were proposed. Electron and positron are eventually accelerated to the center of mass energy 240GeV. RF superconducting acceleration system is indispensable to ensure the normal operation of machine. This article mainly introduces the RF parameters in the design of 700MHz China Higgs Factory (CHF) system. It mainly includes choose of cavity type, couplers and relevant parameters of cryogenic system.

MOP073

IHEP 1.3 GHz Low Loss Large Grain 9-cell Cavity Fabrication, Processing and Test

305

J.Y. Zhai, J. Gao, S. Jin, Z.Q. Li, Y. Liu, Z.C. Liu, Z.H. Mi, X.H. Peng, T.X. Zhao, H.J. Zheng
IHEP, Beijing, People's Republic of China
C.A. Cooper, C.M. Ginsburg, T.N. Khabiboulline, A.M. Rowe, D.A. Sergatskov
Fermilab, Batavia, USA
J.X. Wang, H. Yu, H. Yuan
BIAM, Beijing, People's Republic of China

The combination of the low-loss shape and large grain niobium material is expected to be the possible way to achieve higher gradient and lower cost for ILC 9-cell cavities, and will be essential for the ILC 1 TeV upgrade. As the key component of the “IHEP 1.3 GHz SRF Accelerating Unit Project”, a low-loss shape 9-cell cavity with full end groups using Ningxia large grain niobium (IHEP-02) was fabricated at IHEP in 2012. The cavity was processed (CBP and EP) and tested at FNAL. The cavity processing,test performance and gradient limitation is reported in this paper. We will weld the helium vessel, assemble the magnetic shield and install the cavity to IHEP ILC-TC1 cryomodule.

THIOD01

SRF Cavities for ADS Project in China

868

Y. He, W.M. Yue, S.H. Zhang
IMP, Lanzhou, People's Republic of China
J.P. Dai, Z.Q. Li, Z.C. Liu, W.M. Pan
IHEP, Beijing, People's Republic of China
X.Y. Lu
PKU, Beijing, People's Republic of China

The driver linac for ADS project in China is full superconducting downstream of Radio Frequecy Quadrupole Accelerator. It is a key technology R&D stage of the project from 2011 to 2015. Superconducting HWR, Spoke, and elliptical cavities are all involved in the project. The prototypes of 162.5 MHz HWR010, 325 MHz Spoke012, 325 MHz Spoke021, 325 MHz Spoke040, and 650 MHz elliptical 063 are being developed at IMP and IHEP in China. A small number of HWR010 and Spoke012 have been produced and vertically tested. The first prototype of Spoke021 were tested too. The design, performances, fabrication, suface processing, and testing of all cavities will be presented in the talk. The design improvement of the cavities in the future will also be discussed.

Slides THIOD01 [13.465 MB]

THP017

Mechanical Study on the Cavity Package of 1.3 GHz Superconducting Accelerating Unit at IHEP

926

S. Jin, J. Gao, Z.C. Liu, J.Y. Zhai, H.J. Zheng
IHEP, Beijing, People's Republic of China

The program of 1.3GHz Superconducting RF (SRF) Accelerating Unit is under study at IHEP. A scheme of the unit structure is shown as fig. 1. In the unit, a 9-cell SRF cavity, tuner and a liquid helium (LHe) tank including a section of 50mm long, 0.3mm thick bellows will be welded and assembled together to form a relatively independent component called cavity package. In the study, mechanical analyses are carried out focusing on the package to assure its safety in the fabrications or other room temperature measurements. A commercial program of ANSYS Workbench is used.

Paper	Title	Page
MOP022	Preliminary Design of CEPC RF Superconducting System	140
	H.J. Zheng, J. Gao, S. Jin, Y. Liu, Z.C. Liu, J.Y. Zhai, T.X. Zhao IHEP, Beijing, People's Republic of China
	In order to study Higgs Boson, scientists proposed to construct a Higgs factory. Chinese scientists are also actively involved in research of the construction of Higgs factory. Construction of a circular collider and several construction solutions were proposed. Electron and positron are eventually accelerated to the center of mass energy 240GeV. RF superconducting acceleration system is indispensable to ensure the normal operation of machine. This article mainly introduces the RF parameters in the design of 700MHz China Higgs Factory (CHF) system. It mainly includes choose of cavity type, couplers and relevant parameters of cryogenic system.

MOP073	IHEP 1.3 GHz Low Loss Large Grain 9-cell Cavity Fabrication, Processing and Test	305
	J.Y. Zhai, J. Gao, S. Jin, Z.Q. Li, Y. Liu, Z.C. Liu, Z.H. Mi, X.H. Peng, T.X. Zhao, H.J. Zheng IHEP, Beijing, People's Republic of China C.A. Cooper, C.M. Ginsburg, T.N. Khabiboulline, A.M. Rowe, D.A. Sergatskov Fermilab, Batavia, USA J.X. Wang, H. Yu, H. Yuan BIAM, Beijing, People's Republic of China
	The combination of the low-loss shape and large grain niobium material is expected to be the possible way to achieve higher gradient and lower cost for ILC 9-cell cavities, and will be essential for the ILC 1 TeV upgrade. As the key component of the “IHEP 1.3 GHz SRF Accelerating Unit Project”, a low-loss shape 9-cell cavity with full end groups using Ningxia large grain niobium (IHEP-02) was fabricated at IHEP in 2012. The cavity was processed (CBP and EP) and tested at FNAL. The cavity processing,test performance and gradient limitation is reported in this paper. We will weld the helium vessel, assemble the magnetic shield and install the cavity to IHEP ILC-TC1 cryomodule.

THIOD01	SRF Cavities for ADS Project in China	868
	Y. He, W.M. Yue, S.H. Zhang IMP, Lanzhou, People's Republic of China J.P. Dai, Z.Q. Li, Z.C. Liu, W.M. Pan IHEP, Beijing, People's Republic of China X.Y. Lu PKU, Beijing, People's Republic of China
	The driver linac for ADS project in China is full superconducting downstream of Radio Frequecy Quadrupole Accelerator. It is a key technology R&D stage of the project from 2011 to 2015. Superconducting HWR, Spoke, and elliptical cavities are all involved in the project. The prototypes of 162.5 MHz HWR010, 325 MHz Spoke012, 325 MHz Spoke021, 325 MHz Spoke040, and 650 MHz elliptical 063 are being developed at IMP and IHEP in China. A small number of HWR010 and Spoke012 have been produced and vertically tested. The first prototype of Spoke021 were tested too. The design, performances, fabrication, suface processing, and testing of all cavities will be presented in the talk. The design improvement of the cavities in the future will also be discussed.
	Slides THIOD01 [13.465 MB]

THP017	Mechanical Study on the Cavity Package of 1.3 GHz Superconducting Accelerating Unit at IHEP	926
	S. Jin, J. Gao, Z.C. Liu, J.Y. Zhai, H.J. Zheng IHEP, Beijing, People's Republic of China
	The program of 1.3GHz Superconducting RF (SRF) Accelerating Unit is under study at IHEP. A scheme of the unit structure is shown as fig. 1. In the unit, a 9-cell SRF cavity, tuner and a liquid helium (LHe) tank including a section of 50mm long, 0.3mm thick bellows will be welded and assembled together to form a relatively independent component called cavity package. In the study, mechanical analyses are carried out focusing on the package to assure its safety in the fabrications or other room temperature measurements. A commercial program of ANSYS Workbench is used.