Fermilab, Batavia
DESY, Hamburg
A 4-cavity 3.9 GHz cryomodule has been constructed at Fermilab and delivered to DESY. Its intended use is to linearize the non-linear beam energy-time profile produced by the 1.3 GHz accelerating gradient and thus improve the operating characteristics of FLASH for its users. First cold testing of the module is expected in the near future prior to its installation. We will report on the performance of the cavities, assembly and transport of the module as well as anticipated testing, installation, and commissioning plans.
Fermilab, Batavia
Five 3.9 GHz 9 cell cavities have been measured for the DESY FLASH module. These cavities were BCP processed and reached gradients of typically about 25 MV/m with Q drop starting at about 20 MV/m. Recently one cell cavities have been processed with EP and at least one has tested to a gradient of 30 MV/m with Q drop starting at about 25 MV/m. We will compare the results and give an update to the thermal analysis in relation to global thermal breakdown at 3.9 GHz.
Fermilab, Batavia
BNG, Würzburg
Fermi National Accelerator Lab is continuing to improve its infrastructure for research and development on the processing of superconducting radio frequency cavities. A single cell 3.9 GHz electropolishing tool built at Fermilab and operated at an industrial partner was recently commissioned. The EP tool was used to produce a single cell 3.9 GHz cavity that reached an accelerating gradient of 30 MV/m with a quality factor of 5 109. A single cell 1.3 GHz cavity was also electropolished at the same industrial vendor using the vendor’s vertical full-immersion technique. On their first and only attempt the vendor produced a single cell 1.3 GHz cavity that reached 30 MV/m with a quality factor of 1 1010. These results will be detailed along with preliminary tumbling results.