LINAC2012 - List of Authors (Scherer, A.)

Paper

Title

Page

The Swiss FEL RF Gun: RF Design and Thermal Analysis

442

J.-Y. Raguin, M. Bopp, A. Citterio, A. Scherer
PSI, Villigen, Switzerland

We report here on the design of a dual-feed S-band 2.5 cell RF gun, developed in the framework of SwissFEL, capable of operating at 100 Hz repetition rate. As in the LCLS RF gun, z-coupling, to reduce the pulsed surface heating, and a racetrack coupling cell shape, to minimize the quadrupolar component of the fields, have been adopted. The cell lengths and the iris thicknesses are as in the PHIN gun operating at CERN. However the irises aperture has been enlarged to obtain a frequency separation between the operating π mode and the π/2 mode higher than 15 MHz. An amplitude modulation scheme of the RF power, which allows one to obtain a flat plateau of 150 ns for multibunch operation and a reduced average power is presented as well. With an RF pulse duration of 1μs it is shown that operation at 100 MV/m and 100 Hz repetition rate is feasible with very reasonable thermal stresses.

Slides TUPLB01 [1.679 MB]

TUPB010

The Swiss FEL RF Gun: RF Design and Thermal Analysis

495

J.-Y. Raguin, M. Bopp, A. Citterio, A. Scherer
PSI, Villigen, Switzerland

We report here on the design of a dual-feed S-band 2.5 cell RF gun, developed in the framework of SwissFEL, capable of operating at 100 Hz repetition rate. As in the LCLS RF gun, z-coupling, to reduce the pulsed surface heating, and a racetrack coupling cell shape, to minimize the quadrupolar component of the fields, have been adopted. The cell lengths and the iris thicknesses are as in the PHIN gun operating at CERN. However the irises aperture has been enlarged to obtain a frequency separation between the operating π mode and the π/2 mode higher than 15 MHz. An amplitude modulation scheme of the RF power, which allows one to obtain a flat plateau of 150 ns for multibunch operation and a reduced average power is presented as well. With an RF pulse duration of 1μs it is shown that operation at 100 MV/m and 100 Hz repetition rate is feasible with very reasonable thermal stresses.

Paper	Title	Page
TUPLB01	The Swiss FEL RF Gun: RF Design and Thermal Analysis	442
	J.-Y. Raguin, M. Bopp, A. Citterio, A. Scherer PSI, Villigen, Switzerland
	We report here on the design of a dual-feed S-band 2.5 cell RF gun, developed in the framework of SwissFEL, capable of operating at 100 Hz repetition rate. As in the LCLS RF gun, z-coupling, to reduce the pulsed surface heating, and a racetrack coupling cell shape, to minimize the quadrupolar component of the fields, have been adopted. The cell lengths and the iris thicknesses are as in the PHIN gun operating at CERN. However the irises aperture has been enlarged to obtain a frequency separation between the operating π mode and the π/2 mode higher than 15 MHz. An amplitude modulation scheme of the RF power, which allows one to obtain a flat plateau of 150 ns for multibunch operation and a reduced average power is presented as well. With an RF pulse duration of 1μs it is shown that operation at 100 MV/m and 100 Hz repetition rate is feasible with very reasonable thermal stresses.
	Slides TUPLB01 [1.679 MB]

TUPB010	The Swiss FEL RF Gun: RF Design and Thermal Analysis	495
	J.-Y. Raguin, M. Bopp, A. Citterio, A. Scherer PSI, Villigen, Switzerland
	We report here on the design of a dual-feed S-band 2.5 cell RF gun, developed in the framework of SwissFEL, capable of operating at 100 Hz repetition rate. As in the LCLS RF gun, z-coupling, to reduce the pulsed surface heating, and a racetrack coupling cell shape, to minimize the quadrupolar component of the fields, have been adopted. The cell lengths and the iris thicknesses are as in the PHIN gun operating at CERN. However the irises aperture has been enlarged to obtain a frequency separation between the operating π mode and the π/2 mode higher than 15 MHz. An amplitude modulation scheme of the RF power, which allows one to obtain a flat plateau of 150 ns for multibunch operation and a reduced average power is presented as well. With an RF pulse duration of 1μs it is shown that operation at 100 MV/m and 100 Hz repetition rate is feasible with very reasonable thermal stresses.