Paper | Title | Page |
---|---|---|
TUP021 | 100MeV Proton Accelerator Components Tests by Using 20 MeV Linac | 443 |
|
||
A 100MeV proton accelerator is developed by the Proton Engineering Frontier Project (PEFP). As a front part, a 20MeV linac has been installed and operated at Korea Atomic Energy Research Institute (KAERI) site. Among the components for the 100MeV accelerator, some parts were installed and tested by using 20MeV linac. One modulator for a 100MeV linac was installed to drive two klystrons simultaneously which were used for a 20MeV linac. Various operating parameters such as a long term voltage fluctuation and control performance are checked during operation. Also a LLRF system for 100MeV linac which was modified from the 20MeV system was installed and tested. In this paper, the operation characteristics of the 20MeV linac are presented especially from the viewpoint of the newly installed components such as a modulator and LLRF system. |
||
TUP053 | Preliminary Design of a 70MHz RFQ for Radio Isotope Beams | 527 |
|
||
A Radio Frequency Quadrupole (RFQ) has being desinged for the post-acceleration of radio isotope beams from a radio isotope beam production system such as an isotpe separation on line (ISOL) or an in-flight separation. For simple and efficient beam acceleration, a chrage breeding system such as an electron cyclotron resonance ion source (ECRIS) or electron beam ion source (EBIS) The RFQ will operate at a resonant frequency of 70MHz at cw mode, and accelerate the beams to 300keV/nucleon. In the conference we will present the design of the RFQ. |