Keyword: betatron
Paper Title Other Keywords Page
MOPF32 Development of Gated Turn-by-Turn Position Monitor System for the Optics Measurement During Collision of SuperKEKB BPM, controls, optics, coupling 295
 
  • M. Tobiyama, H. Fukuma, H. Ishii, K. Mori
    KEK, Ibaraki, Japan
 
  Gated turn-by-turn monitor system to measure optics functions using non-colliding bunch has been developed for SuperKEKB accelerators. With the fast, glitch cancelling beam switch, beam position of the target bunch will be measured without affecting the fine COD measurement using narrow-band detectors. The gate timing and the bunch position detection are controlled by the Spartan-6 FPGA. The performance of the system, such as the gate timing jitter, data transfer speed from the system to EPICS IOC and the noise effect to the downstream narrow-band detector are reported.  
poster icon Poster MOPF32 [1.531 MB]  
 
WEPC28 Bunch By Bunch Transverse Beam Position Observation and Analyze During Injection at SSRF injection, kicker, transverse, storage-ring 746
 
  • Y.B. Leng, Y.B. Yan, Y. Yang, R.X. Yuan, N. Zhang
    SSRF, Shanghai, People's Republic of China
 
  Funding: Work supported by National Science Foundation of China (No. 11075198)
Top-up operation has been performed at SSRF since Dec. 2012. Orbit disturbance every 10 minutes decreased the quality of synchrotron radiation. In order to minimize this disturbance the tilts and the timing of injection kickers need to be tuning carefully based on real beam information. A set of button type pick-up and a scope based IOC were employed to capture the transient beam movement with bunch by bunch rate during injection. Several sets of observation and analyze will be discussed in this paper.