A   B   C   D   E   F   G   H   I   J   K   L   M   N   O   P   Q   R   S   T   U   V   W   X   Y   Z  

Wei, J.

Paper Title Page
WGC12 Beam Preparation for the Injection into CSNS RCS 320
 
  • J. Tang, L. Liu, J. Qiu, G.H. Wei, J. Wei, C. Zhang
    IHEP Beijing, Beijing
 
 

The Rapid Cycling Synchrotron of the China Spallation Neutron Source is a high intensity proton machine, with the accumulated particles of 1.9*1013. The injection by the H- stripping method is performed in one of the four long uninterrupted dispersion-free straight-sections. The phase space painting technique is used for all the three phase planes to alleviate the space charge effects. In order to reduce the beam loss during the injection, the transverse and longitudinal halo of the linac beam is collimated in the Linac Ring Beam Transport line. The transverse beam halo collimation is based on a method of using periodic triplet cells and foil scrapers, which has the advantages of low beam loss in the beam line, deep halo collimation allowing almost no H- particles missing the injection foil, and possible proton applications of the scraped beam halo. A new simulation code SCOMT has also been developed to tackle the transfer, conversion and multiple scattering of the mixed H-, H0 and proton beams in the beam line. The large momentum spread of the linac beam is reduced by a debuncher and the longitudinal beam halo is collimated by a momentum collimator in the bending section.

 

slides icon

Slides