ECRIS2012 - List of Authors (Zhang, Z.M.)

Paper	Title	Page
TUPP13	Development of Intense Proton ECR Ion Sources at IMP	64
	Z.M. Zhang, Z.W. Liu, H.Y. Ma, L.T. Sun, Q. Wu, Y. Yang, W.H. Zhang, X.Z. Zhang, H.W. Zhao IMP, Lanzhou, People's Republic of China
	Since 1997, there have been two ECR ion sources for producing intense proton beam developed at Institute of Modern Physics (IMP). In 1999, a high current 2.45 GHz ECR proton source for Lanzhou university neutron generator, was constructed and tested at IMP. A mixed ion (H¹⁺ + H²⁺ + H³⁺) beam current of 110 mA with CW mode was delivered from a single aperture of 6mm diameter with microwave power of 600 W at the extraction voltage of 22 kV. Recently a new pulsed proton source has been designed and built at IMP for the CPHS (Compact Pulse Hadron Source) facility in Tsinghua University. Now this source is under commissioning for 60 mA proton beam with 50 keV energy. The long time running stability and beam emittance have been tested and the results are well up to the requirements of CPHS. In this paper, after a short review of the proton ion source for Lanzhou University, the design and test results of the CPHS proton source as well as the LEBT will be presented. The design of the proton ion source and the LEBT for the Chinese ADS project will also be discussed in the contents.

Paper

Title

Page

Development of Intense Proton ECR Ion Sources at IMP

64

Z.M. Zhang, Z.W. Liu, H.Y. Ma, L.T. Sun, Q. Wu, Y. Yang, W.H. Zhang, X.Z. Zhang, H.W. Zhao
IMP, Lanzhou, People's Republic of China

Since 1997, there have been two ECR ion sources for producing intense proton beam developed at Institute of Modern Physics (IMP). In 1999, a high current 2.45 GHz ECR proton source for Lanzhou university neutron generator, was constructed and tested at IMP. A mixed ion (H¹⁺ + H²⁺ + H³⁺) beam current of 110 mA with CW mode was delivered from a single aperture of 6mm diameter with microwave power of 600 W at the extraction voltage of 22 kV. Recently a new pulsed proton source has been designed and built at IMP for the CPHS (Compact Pulse Hadron Source) facility in Tsinghua University. Now this source is under commissioning for 60 mA proton beam with 50 keV energy. The long time running stability and beam emittance have been tested and the results are well up to the requirements of CPHS. In this paper, after a short review of the proton ion source for Lanzhou University, the design and test results of the CPHS proton source as well as the LEBT will be presented. The design of the proton ion source and the LEBT for the Chinese ADS project will also be discussed in the contents.