Rosenzweig, J.

Paper	Title	Page
MOPKF043	An Ultra-high Brightness, High Duty Factor, Superconducting RF Photoinjector	402
	M. Ferrario INFN/LNF, Frascati (Roma) J. Rosenzweig UCLA, Los Angeles, California J. Sekutowicz DESY, Hamburg
	Recent advances in superconducting rf technology, and an improved understanding of rf photoinjector design optimization make if possible to propose a specific design for a superconducting rf gun which can simultaneously produce both ultra-high peak brightness, and high average current. Such a device may prove to be a critical component of next generation x-ray sources such as self-amplified spontaneous emission free-electron lasers (SASE FEL) and energy recovery linac (ERL) based systems. The design presented is scaled from the present state-of-the-art normal conducting rf photoinjector that has been studied in the context of the LCLS SASE FEL. Issues specific to the superconducing rf photoinjector, such as accelerating gradient limit, rf cavity design, and compatibility with magnetic focusing and laser excitation of a photocathode, are discussed.
MOPKF041	SPARC Photoinjector Working Point Optimization, Tolerances and Sensitivity to Errors	396
	M. Ferrario, M.E. Biagini, M. Boscolo, V. Fusco, S. Guiducci, M.  Migliorati, C. Sanelli, F. Tazzioli, C. Vaccarezza INFN/LNF, Frascati (Roma) L. Giannessi, L. Mezi, M. Quattromini, C. Ronsivalle ENEA C.R. Frascati, Frascati (Roma) J. Rosenzweig UCLA, Los Angeles, California L. Serafini INFN-Milano, Milano
	A new optimization of the SPARC photoinjector, aiming to reduce the FEL saturation length, is presented in this paper. Start to end simulations show that with 1.1 nC charge in a 10 ps long bunch we can deliver at the undulator entrance a beam having 100 A in 50% of the slices (each slice being 300 mm long) with a slice emittance ?1 mm, thus reducing the FEL-SASE saturation length to 12 m at 500 nm wavelength. In addition the stability of the nominal working point and its sensitivity to various type of random errors, under realistic conditions of the SPARC photoinjector operation, are discussed. A systematic scan of the main parameters around the operating point, performed with PARMELA code interfaced to MATLAB, shows that the probability to get a projected emittance exceeding 1 mm is only 10 % and the slice emittance remains below 1 mm in all cases.
MOPKF042	Status of the SPARC Project	399
	M. Ferrario, D. Alesini, M. Bellaveglia, S. Bertolucci, M.E. Biagini, R. Boni, M. Boscolo, M. Castellano, A. Clozza, G. Di Pirro, A. Drago, A. Esposito, D. Filippetto, V. Fusco, A. Gallo, A. Ghigo, S. Guiducci, M. Incurvati, C. Ligi, F. Marcellini, L. Pellegrino, M.A. Preger, R. Ricci, C. Sanelli, M. Serio, F. Sgamma, B. Spataro, A. Stecchi, A. Stella, F. Tazzioli, C. Vaccarezza, M. Vescovi, C. Vicario INFN/LNF, Frascati (Roma) F. Alessandria, A. Bacci, M. Mauri INFN/LASA, Segrate (MI) I. Boscolo, F. Brogli, S. Cialdi, C. De Martinis, D. Giove, C. Maroli, V. Petrillo, M. Romé, L. Serafini INFN-Milano, Milano L. Catani, E.C. Chiadroni, A. Cianchi, S. Tazzari Università di Roma II Tor Vergata, Roma F. Ciocci, G. Dattoli, A. Doria, F. Flora, G.P. Gallerano, L. Giannessi, E. Giovenale, G. Messina, L. Mezi, P.L. Ottaviani, L. Picardi, M. Quattromini, A. Renieri, C. Ronsivalle ENEA C.R. Frascati, Frascati (Roma) D. Dowell, P. Emma, C. Limborg-Deprey, D. Palmer SLAC, Menlo Park, California D. Levi, M. Mattioli, G. Medici Università di Roma I La Sapienza, Roma M.  Migliorati, A. Mostacci, L. Palumbo Rome University La Sapienza, Roma P. Musumeci, J. Rosenzweig UCLA, Los Angeles, California M. Nisoli, S. Stagira, S. de Silvestri Politecnico/Milano, Milano
	The aim of the SPARC project is to promote an R&D activity oriented to the development of a high brightness photoinjector to drive SASE-FEL experiments at 500 nm and higher harmonics generation. It has been proposed by a collaboration among ENEA-INFN-CNR-Universita‘ di Roma Tor Vergata-INFM-ST and funded by the Italian Government with a 3 year time schedule. The machine will be installed at LNF, inside an existing underground bunker. It is comprised of an rf gun driven by a Ti:Sa laser to produce 10-ps flat top pulses on the photocathode, injecting into three SLAC accelerating sections. We foresee conducting investigations on the emittance correction and on the rf compression techniques up to kA level. The SPARC photoinjector can be used also to investigate beam physics issues like surface-roughness-induced wake fields, bunch-length measurements in the sub-ps range, emittance degradation in magnetic compressors due to CSR. We present in this paper the status of the design activities of the injector and of the undulator. The first test on diagnostic prototypes and the first experimental achievements of the flat top laser pulse production are also discussed.
THPLT057	An RF Deflector Design for 6d Phase Space Characterization of the Sparc Beam	2613
	C. Vaccarezza, D. Alesini INFN/LNF, Frascati (Roma) M. Amadei, P. Cascavola, A. Mostacci, L. Palumbo Rome University La Sapienza, Roma J. Rosenzweig UCLA, Los Angeles, California
	The characterization of the longitudinal and transverse phase space of the beam provided by the SPARC photoinjector is a crucial point to establish the performance quality of the photoinjector itself. By means of an RF deflector and a dispersive system, the six dimensional beam phase space can be analyzed. A five cell SW aluminum prototype of the SPARC RF deflector has been realized and tested. We report in this paper the design issues together with the RF measurement results. The simulation results of the 6D phase space reconstruction of the SPARC beam are also presented.
THOBLH02	Ultrafast Compton Scattering X-Ray Source Development at LLNL	270
	F.V. Hartemann, S. Anderson, C.P.J. Barty, S.M. Betts, R. Booth, J. Brown, K. Crane, R.R. Cross, D.N. Fittinghoff, D. Gibson, E.P. Hartouni, J. Kuba, G.P. Le Sage, D.R. Slaughter, P.T. Springer, A. Tremaine, A.J. Wootton LLNL, Livermore, California J. Rosenzweig UCLA, Los Angeles, California
	The LLNL PLEIADES (Picosecond Laser-Electron Inter-Action for the Dynamical Evaluation of Structures) facility is now operating between 30 and 80 keV, and produces > 5 x 106 photons per shot at 10 Hz. This important milestone offers a new opportunity to develop laser-driven, compact, tunable x-ray sources for critical applications such as NIF diagnostics, time-resolved material studies, and advanced biomedical imaging. Initial x-rays were captured with a CCD using a CsI scintillator; the photon energy was measured at approximately 70 keV, and the observed spectral and angular distributions found to agree very well with three-dimensional codes. The electron beam was focused to 30 um rms, at 54 MeV, with 250 pC of charge, a relative energy spread of 0.2%, and a normalized emittance of 10 mm.mrad. Optimization of the x-ray dose is currently underway, with the goal of reaching 107 photons per shot and a peak brightness approaching 1017 photons/mm2/mrad2/s/0.1%bandwidth. High-Z K-edge radiographs have been demonstrated, as well as diffraction using highly-ordered pyrolytic graphite crystals. Nonlinear scattering experiments, using a tightly focused laser spot will also be discussed, as well as plans to develop a source capable of reaching 1% conversion efficiency from the electron beam kinetic energy into x-rays, and ultrafast diffraction experiments.
	Video of talk
	Transparencies