Paper |
Title |
Page |
MOPLT005 |
An Improved Collimation System for the LHC
|
536 |
|
- R.W. Assmann, O. Aberle, A. Bertarelli, H.-H. Braun, M. Brugger, L. Bruno, O.S. Brüning, S. Calatroni, E. Chiaveri, B. Dehning, A. Ferrari, B. Goddard, E.B. Holzer, J.-B. Jeanneret, J.M. Jimenez, V. Kain, M. Lamont, M. Mayer, E. Métral, R. Perret, S. Redaelli, T. Risselada, G. Robert-Demolaize, S. Roesler, F. Ruggiero, R. Schmidt, D. Schulte, P. Sievers, V. Vlachoudis, L. Vos, G. Vossenberg, J. Wenninger
CERN, Geneva
- I.L. Ajguirei, I. Baishev, I.L. Kurochkin
IHEP Protvino, Protvino, Moscow Region
- D. Kaltchev
TRIUMF, Vancouver
- H. Tsutsui
SHI, Tokyo
|
|
|
The LHC design parameters extend the maximum stored beam energy 2-3 orders of magnitude beyond present experience. The handling of the high-intensity LHC beams in a super-conducting environment requires a high-robustness collimation system with unprecedented cleaning efficiency. For gap closures down to 2mm no beam instabilities may be induced from the collimator impedance. A difficult trade-off between collimator robustness, cleaning efficiency and collimator impedance is encountered. The conflicting LHC requirements are resolved with a phased approach, relying on low Z collimators for maximum robustness and hybrid metallic collimators for maximum performance. Efficiency is further enhanced with an additional cleaning close to the insertion triplets. The machine layouts have been adapted to the new requirements. The LHC collimation hardware is presently under design and has entered into the prototyping and early testing phase. Plans for collimator tests with beam are presented.
|
|
MOPLT028 |
In-Situ Vibration Measurements of the CTF2 Quadrupoles
|
602 |
|
- S. Redaelli, W. Coosemans
CERN, Geneva
|
|
|
The Compact LInear Collider (CLIC), presently under study at the European Organization for Nuclear Research (CERN), aims at colliding high-energy nanobeams'' at a luminosity of 1035 cm-2s-1. Vibrations of the lattice elements, if not properly corrected, can result in a loss in performance by creating both unacceptable emittance growth in the linear accelerator and relative beam-beam offsets at the interaction point. Of particular concern are the vibrations induced by the accelerator environment. For example, the circulating water used to cool the lattice quadrupoles will increase magnet vibration levels. In the framework of the CLIC stability study, in-situ measurements of quadrupole vibrations have been performed at the CLIC Test Facility 2 (CTF2) with all accelerator equipment switched on. Since the CTF2 quadrupoles and their alignment support structures are realistic prototypes of those to be used in the CLIC linac, the measurements provide a realistic estimate of the CLIC magnet vibrations in a realistic accelerator working environment.
|
|
WEPLT006 |
Expected Performance and Beam-based Optimization of the LHC Collimation System
|
1825 |
|
- R.W. Assmann, E.B. Holzer, J.-B. Jeanneret, V. Kain, S. Redaelli, G. Robert-Demolaize, J. Wenninger
CERN, Geneva
|
|
|
The cleaning efficiency requirements in the LHC are 2-3 orders of magnitude beyond the requirements at other super-conducting circular colliders. The achievable ideal cleaning efficiency in the LHC is presented and the deteriorating effects of various physics processes and imperfections are discussed in detail for the improved LHC collimation system. The longitudinal distribution of proton losses downstream of the betatron cleaning system are evaluated with a realistic aperture model of the LHC. The results from simplified tracking studies are compared to simulations with complete physics and error models. Possibilities for beam-based optimization of collimator settings are described.
|
|
THPKF011 |
Vibration Measurements at the Swiss Light Source (SLS)
|
2275 |
|
- S. Redaelli, R.W. Assmann, W. Coosemans
CERN, Geneva
- M. Böge, M. Dehler, L. Rivkin
PSI, Villigen
|
|
|
Vibration measurements have been carried out at the Swiss Light Source (SLS) site as part of a collaboration between the Paul Scherrer Institute (PSI) and the European Organization for Nuclear Research (CERN). The vibration level of the SLS floor and of some lattice elements of the SLS ring have been monitored under various experimental conditions. In particular, vibration spectra of lattice quadrupoles have been measured with a circulating beam and compared with the spectra of transverse beam positions, as measured with beam position monitors. This paper summarizes the results.
|
|